Deployment

The user-mode library comes in two pieces, both of which must be deployed along with the application:

1. A .NET assembly (managed), named callback.CBFSVault.dll (or callback.CBFSVault.NetStd.dll, for .NET Standard).
2. A native dynamic library (unmanaged), named cbfsvault24.dll, available for both 32-bit (x86) and 64-bit (x64, ARM64) processor architectures.

When deploying the application, copy both the .NET assembly and the native library to the target system and place them next to the application's executable file (on Windows, it has the .exe extension).

Alternatively, the native library may be placed into one of directories, the paths to which are contained in the

• Windows: PATH environment variable, such as C:\Windows\System32 (or C:\Windows\SysWOW64 when deploying a 32-bit application on a 64-bit Windows system)
• Linux: LD_LIBRARY_PATH environment variable
• macOS: DYLD_LIBRARY_PATH environment variable

Android: the native library must be included into the APK. For this, add the following section to your project:

<ItemGroup Condition="$(TargetFramework.Contains('android'))"> <AndroidNativeLibrary Include="path_to_product\lib\android\arm64-v8a\libcbfsvault.24.0.so" /> <AndroidNativeLibrary Include="path_to_product\lib\android\armeabi-v7a\libcbfsvault.24.0.so" /> <AndroidNativeLibrary Include="path_to_product\lib\android\x86\libcbfsvault.24.0.so" /> <AndroidNativeLibrary Include="path_to_product\lib\android\x86_64\libcbfsvault.24.0.so" /> </ItemGroup> where path_to_product may be an absolute path or a relative path from your project. The two lines that reference x86 and x64 libraries may not be necessary if your APK is not intended to be run on x86/x64 processors.

iOS and macCatalyst: the native library must be included into the product bundle. For this, add the following section to your project:

<ItemGroup Condition="$(TargetFramework.Contains('ios'))"> <NativeReference Include=">path_to_product/framework/CBFSVault.framework/ios-arm64/CBFSVault.framework"> <Kind>Framework</Kind> <SmartLink>true</SmartLink> <ForceLoad>true</ForceLoad> </NativeReference> </ItemGroup> <ItemGroup Condition="$(TargetFramework.Contains('mac'))"> <NativeReference Include=">path_to_product/framework/CBFSVault.framework/ios-arm64_x86_64-maccatalyst/CBFSVault.framework"> <Kind>Framework</Kind> <SmartLink>true</SmartLink> <ForceLoad>true</ForceLoad> </NativeReference> </ItemGroup> where path_to_product may be an absolute path or a relative path from your project.

In Windows and Linux packages, the framework can be found in the <path_to_product>/libs/native/ios directory.

Windows:

The .NET assembly may be deployed to the Global Assembly Cache (GAC).

Loading of Native Library

Usually, .NET finds the native library when it is placed next to the assembly. But on some systems, it skips the directory of the assembly or even of the main application module. To ensure that this doesn't happen on a user's system when an application keeps the native library next to the .NET assembly, in the .NET Core 3.1 and .NET 5+ applications, you can use the DllImportResolver function as shown in the following snippet: public static IntPtr CBVaultImportResolver(string libraryName, Assembly assembly, DllImportSearchPath? searchPath) { bool loaded = false; IntPtr libHandle = IntPtr.Zero; if (!libraryName.Contains("callback.CBFSVault")) return IntPtr.Zero; //Look for the native library next to the .NET assembly loaded = NativeLibrary.TryLoad(libraryName, assembly, DllImportSearchPath.AssemblyDirectory, out libHandle); //Look for the native library in the application's main directory if (!loaded) loaded = NativeLibrary.TryLoad(libraryName, assembly, DllImportSearchPath.ApplicationDirectory, out libHandle); //Look for the native library using teh default .NET behavior if (!loaded) loaded = NativeLibrary.TryLoad(libraryName, assembly, searchPath, out libHandle); return loaded ? libHandle : IntPtr.Zero; } ... NativeLibrary.SetDllImportResolver(Assembly.GetAssembly(typeof(CBVault)), CBVaultImportResolver); This code attempts to load the native library in the directory of the managed .NET assembly, and if not found then attempts to find the library in the application's main directory, and if not found then revert to the default .NET behavior. Only one DllImportResolver function may be set for the assembly, so doing the above for one component is sufficient.

In the .NET Framework 4.x applications, one can use AppDomain.CurrentDomain.AssemblyResolve event for the same purpose.

NuGet Notes

After the NuGet package is added to a project, both the managed .NET assembly and the unmanaged native library will be copied to the project's output directory anytime the project is built. However, the exact files copied to the output directory for the native library will vary based on the project type:

• For .NET Core projects, a runtimes directory will be created in the output directory (if it does not already exist), and versions of the native library for each supported runtime identifer (RID) (e.g., win-x64) will be placed in the appropriate subdirectories. When the .NET Core application is distributed, the entire runtimes directory should be deployed alongside it.
• For other types of projects (.NET Framework, UWP), only the native library version specific to the currently selected platform target (e.g., x64) will be copied to the output directory.
  • For .NET Framework projects specifically, please note that the project's platform target (Project > Properties > Build Tab > Platform target) must be set to a real architecture. If it is set to "Any CPU", no native library will be copied to the output directory.

Windows:

The native library may alternatively be installed to the Windows system directory. This approach allows deploying both the 32-bit and 64-bit versions of the native library simultaneously, because each gets placed into the system directory that corresponds to the appropriate processor architecture.

General Information

The topics in this section provide general information about various aspects of the product's functionality.

Topics

• Buffer Parameters
• Callback Mode
• Encryption
• Error Handling
• File Features section
• Query Language section
• Vaults section

Buffer Parameters

Some events include one or more parameters intended for use as a binary data buffer. Depending on the event, these parameters may contain data when the event is fired, or it may be expected that the application populates them with the desired amount of data during the event handler. Some events combine both paradigms and then expect the application to modify the data already present when the event is fired.

The documentation for such events will describe which of these cases applies to each buffer parameter. In all cases, buffer parameters point to a preallocated block of unmanaged memory, the size of which is specified by the parameter immediately following the buffer parameter. In cases in which data are to be written, be sure to write it directly to the pointed-to memory, do not change the value of the buffer parameter itself.

Buffer parameters are always of the IntPtr type; use the .NET Marshal.Copy() method to read and write data from and to the unmanaged memory region. When targeting newer .NET versions, such as .NET Standard 2.1 and later, applications can use the Span<T> and ReadOnlySpan<T> classes to access and modify the unmanaged memory region without extra data copying.

Callback Mode

As discussed in the Vaults topic, the default behavior of CBVault component is to create a vault using a real file on a local disk. However, the filesystem engine behind these components does not require a vault to be a local file: it can be a remote file, a memory region, or anything else that the application can provide random read/write access to.

Applications that wish to use something other than a local file to store a vault must enable callback mode using the component's CallbackMode property. When callback mode is enabled, applications must handle the following events (which map closely to the Windows File API) for the component to interact with the vault. For brevity, vaults created and accessed using callback mode are typically referred to as "callback mode vaults".

• VaultClose: Fires when the currently open vault should be closed.
• VaultDelete: Fires when a callback mode vault (that is not open) should be deleted.
• VaultFlush: Fires when any buffered vault data should be flushed out to storage.
• VaultGetParentSize: Fires when the component needs to know how much free space is available for the currently open vault to use for automatic growth.
• VaultGetSize: Fires when the component needs to know the size of the currently-open vault.
• VaultOpen: Fires when a callback mode vault should be opened (and, if necessary, created).
• VaultRead: Fires when the component needs to read one or more pages of vault data.
• VaultSetSize: Fires when the component needs to resize (i.e., shrink or grow) the currently open vault.
• VaultWrite: Fires when the component needs to write one or more pages of vault data.

Callback mode is an extremely powerful feature for applications that want to fine-tune performance. For example, consider the following scenario: a help-authoring tool that keeps a compound file in memory for fast operations. In this scenario, the vault would be a help project that the help-authoring tool loads into memory and uses the above events to access. When a user needs to save the project, the vault is flushed and the data in memory are copied back to the help project on disk.

Note: An application should not attempt to call component's methods from handlers of the listed events. Doing this is guaranteed to cause a deadlock.

Encryption

The CBVault component includes strong built-in data encryption support, which can be applied to individual files and alternate streams, entire vaults, or both. Each file, alternate stream, and vault can have its own encryption key.

Note: The API members discussed in this topic are available in all listed components, unless otherwise noted.

Encrypting Vaults

To specify a default encryption mode and password to use when creating new vaults, applications can set the VaultEncryption and VaultPassword properties. To change the encryption mode or password of an existing vault, use the UpdateVaultEncryption method.

When opening an existing vault, VaultEncryption is updated to reflect the vault's encryption mode; and if the vault is encrypted, the password specified by VaultPassword is used to access it.

Encrypting Files and Alternate Streams

To specify a default encryption mode and password for files and alternate streams, applications can set the DefaultFileEncryption and DefaultFilePassword properties. Additionally, the following methods allow applications to set a file or alternate stream's encryption mode or password explicitly:

• OpenFile (when creating a new file or alternate stream)
• OpenFileEx (when creating a new file or alternate stream)
• SetFileEncryption
• CopyToVault

When a file or alternate stream is encrypted, its encryption password must be provided to access it; many methods in the component's API provide a Password parameter for this purpose. If the application does not explicitly specify a password when calling such a method, then the DefaultFilePassword will be used, if possible.

Using Custom Encryption

The component's built-in encryption implementation uses 256-bit AES encryption in XTS mode with PBKDF2 key derivation based on a HMAC-SHA256 key hash. However, applications also can choose to provide their own custom encryption and key derivation implementations. This flexibility allows applications to support more sophisticated security techniques, such as PKI-based encryption or Digital Rights Management. To get started, do the following:

1. Choose a custom encryption mode to implement (i.e., one of the VAULT_EM_CUSTOM* options from the table below). This choice will determine:
   • Whether the custom encryption implementation uses a 256-bit, 512-bit, or 1024-bit block size; and,
   • Whether to use built-in key derivation, custom key derivation, or no key derivation.
2. Implement the DataEncrypt and DataDecrypt events.
3. If a VAULT_EM_CUSTOM*_CUSTOM_KEY_DERIVE mode was chosen, implement the KeyDerive event.
4. If a VAULT_EM_CUSTOM*_DIRECT_KEY mode was chosen, implement the HashCalculate event.

Supported Encryption Modes

The component supports the following encryption modes:

Error Handling

Error Codes

The CBFS Vault component APIs communicate errors using the error codes defined on the Error Codes page.

Reporting Errors to the Component from Event Handlers

If an event has a ResultCode parameter, an event handler can use it to return the result code of the operation to the component. The ResultCode parameter is set to 0 by default, which indicates the operation was successful.

If an unhandled exception occurs in the event handler, it will be caught by the component, which will fire the OnError event.

In some events, the OS does not expect the error code to be returned and either the component or the OS ignores the returned error code. Please refer to the description of a particular event for more information.

How to Handle Errors Reported by the Component

If an error occurs, the component will throw an exception. The Code property of the exception object will contain an error code, and the Message property will contain an error message (if available).

File Features

The topics in this section provide information about file-related features.

Topics

• Alternate Streams
• Compression
• File Tags

Alternate Streams

Every file stored in a CBFS Vault vault contains a primary stream of data that holds the file's contents. In addition to this primary stream, files in a vault may also contain one or more alternate streams of data whose contents are determined by the application. By taking advantage of the flexibility that alternate streams offer, applications can support a wide range of use-cases, including the following:

• Storing a file's metadata or security information.
• Saving supplementary information associated with a file (e.g., song lyrics for music files).
• Maintaining a history of file content revisions.
• Providing multiple representations of the same file (e.g., HTML, RTF, and plain versions of text content).

Alternate streams are addressed using names like <FileName>:<StreamName>, so an alternate stream named "altstream" could be addressed as \path\to\filename.ext:altstream. Alternate streams can be created and accessed just like files using OpenFile, OpenFileEx, and DeleteFile, and can even be compressed or encrypted individually if an application desires.

To enumerate a file's alternate streams, call the FindFirst method with a mask like <FileName>:<StreamNameMask>. The <StreamNameMask> part can be * to enumerate all streams in a file. A file's main stream, which is always nameless, can be accessed explicitly using the name <FileName>: (note the trailing colon).

Compression

The CBFS Vault filesystem stores data in a vault as a series of one or more pages. To reduce space usage, CBFS Vault can compress files and alternate streams with an application-selected compression algorithm using the following mechanism, which is optimized to provide optimal performance for both sequential and random data access:

1. A block of data composed of a specific number of pages is passed to the compression routine, which attempts to compress the data.
2. If the compressed data can be stored using fewer pages than before, it is written to the vault. Otherwise, the original (uncompressed) data are written instead.
3. Steps 1 and 2 are repeated until all of the data pages associated with the file or alternate stream have been processed.

Compressing Files and Alternate Streams

To specify a default compression mode for files and alternate streams, applications can set the DefaultFileCompression property (and, if applicable, the DefaultFileCompressionLevel configuration setting). Additionally, the following methods allow applications to set a file or alternate stream's compression mode explicitly:

• OpenFileEx (when creating a new file or alternate stream)
• SetFileCompression
• CopyToVault

Using Custom Compression

CBFS Vault includes built-in support for zlib and RLE data compression. However, applications can also choose to provide their own custom compression implementation using the DataCompress and DataDecompress events.

Supported Compression Modes

CBFS Vault supports the following compression modes:

File Tags

CBFS Vault allows applications to attach arbitrary metadata to any file, directory, or alternate stream using file tags. There are two kinds of file tags, both of which are stored as key-value pairs:

1. Raw file tags use numeric Ids as keys and store raw binary data.
   • Valid Id values are those in the range 0x0001 to 0xCFFF (inclusive).
   • A tag should contain at least one (1) byte of data.
   • The maximum size of a raw file tag's binary data is 65531 bytes.
2. Typed file tags use string keys and store typed values.
   • Names may be up to 4095 characters long (not including the null terminator), and are stored in UTF-16LE format internally.
   • The maximum size of a typed file tag's value is 65529 - (name_length * 2) bytes (where name_length is measured in characters, including the null terminator).

Each file, directory, and alternate stream can have up to 1024 typed file tags and 53247 raw file tags attached to it at once. The following methods are used to manage and interact with file tags:

• DeleteFileTag
• FileTagExists
• GetFileTag, GetFileTagAsAnsiString, GetFileTagAsBoolean, GetFileTagAsDateTime, GetFileTagAsNumber, GetFileTagAsString
• GetFileTagDataType
• GetFileTagSize
• SetFileTag, SetFileTagAsAnsiString, SetFileTagAsBoolean, SetFileTagAsDateTime, SetFileTagAsNumber, SetFileTagAsString

Applications can also use the FindFirstByQuery method to search for files and directories whose file tags match a specified query; please refer to that method's documentation, as well as the Query Language topic, for more information.

Note: The query language works only with typed file tags; it does not support raw file tags.

Query Language

In addition to searching by name, applications can search for files and directories based on their File Tags (metadata) using the CBFS Vault query language.

The query language includes a wide variety of Language Elements and supports all common Data Types. Search queries are interpreted as UTF-16LE strings, and they may contain any valid arrangement of language elements, typed file tag names, and constants. For example:

• From = 'John Smith': Selects all files received from John Smith.
  • From is the name of a file tag.
  • = is the equality operator (== is also supported).
  • 'John Smith' is a string constant.
• SendData - Today > 3: Selects all files that were sent more than three days ago.
  • SendData is the name of a file tag.
  • - is the subtraction operator.
  • Today is an intrinsic constant that returns the current system date.
  • > is the greater than operator.
  • 3 is a numeric constant.

When parsing an expression from a search query, the query engine converts all of its operands to the same data type using a specific set of rules; please see the Type Conversion topic for more information.

To find the first match for a query, call the FindFirstByQuery method, passing the desired search query for the Query parameter; and then call FindNext to find other matches, if necessary. Be sure to call FindClose when finished so that the component can release the resources allocated for the search operation.

Please refer to the File Tags topic for more information about how to manage file tags and see the other topics in this section for more information about the query language:

• Data Types
• Language Elements
• Type Conversion

Language Elements

The CBFS Vault query language supports a wide variety of language elements, all of which are described below.

Logical Operators

Arithmetic Operators

Addition and subtraction operations involving DateTime operands behave as follows:

• When adding a Number (n) and a DateTime, the result is a DateTime whose value has increased by n whole days.
• When subtracting a Number (n) from a DateTime, the result is a DateTime whose value has decreased by n whole days.
• When subtracting a DateTime from another DateTime, the result is a Number that reflects the difference as a number of whole days. The query evaluator converts both operands to whole days before performing the subtraction; "leftover" time is truncated as part of the conversion.

Relational Operators

Conditions

Keep the following in mind when using the LIKE condition:

• Two kinds of wildcards are supported: %, which matches a string of any length; and _, which matches any single character. For example:
  • From LIKE '% Smith': Selects all files received from people with the last name "Smith".
  • From LIKE 'John Sm_th': Selects all files received from people with the first name "John" and a last name that is five characters long, begins with "Sm", and ends with "th" (e.g., Smith, Smyth, Smeth).
• To search for values that include wildcard characters, the optional ESCAPE parameter can be used to specify a wildcard escape character. For example:
  • From LIKE 'John!_Smith' ESCAPE '!': Selects all files received from "John_Smith".
  • From LIKE 'John!_%' ESCAPE '!': Selects all files received from a name that begins with "John_".

File Variables

File variables represent some piece of information about the current file the query is being evaluated against.

Intrinsics

"Intrinsics" are the functions and constants built into the query language.

Precedence

The following table lists the query language's elements in order of descending precedence. Any legal expression within a query string may be surrounded with parentheses () to override precedence or increase readability.

Note: The query engine treats the D(value) function as an operator, so its precedence is lower than the other intrinsics.

Data Types

The CBFS Vault query language supports the following operand data types:

Type Conversion

When CBFS Vault parses a query, it will attempt to convert operands to the same type before evaluating an expression. The right-hand operand is converted to match the type of the left-hand operand if possible; otherwise, if the right-hand operand is a String type, the left-hand operand is converted to String.

Supported Data Type Conversions

In addition to the implicit conversion mentioned above, a String can be converted to a DateTime explicitly using the intrinsic function D(value). The implicit and explicit conversions both use the parsing pattern shown above, which has a number of optional parts:

• The date separators - may be omitted if the month and day are both two-digit values. They must both be present if the month and/or day is a single-digit value.
• The time portion may be omitted; if present, it must be specified as one of the following: hours only; hours and minutes; hours, minutes, and seconds; or hours, minutes, seconds, and milliseconds.
  • The time separators : may be omitted if all included time elements are two-digit values. They must be present if any time elements are single-digit values.
  • Milliseconds, if present, must always be separated by a . character, and must always be a three-digit value.
• When the time portion is present, it may immediately follow the date portion (i.e., with no separator), or it may be separated from the date portion using a T, a t, or a single space.

Vaults

What Is a Vault?

The key functionality CBFS Vault provides is the ability to create and store an entire filesystem (complete with files, directories, metadata, and much more) in a standalone container called a vault.

A vault is typically stored as a real file on a local disk (similar to, e.g., an SQLite database file), but applications can technically store it using any data location by using Callback Mode.

Internally, a vault's storage space is divided into chunks of equal size called pages. A vault's page size is specified at creation time, and it cannot be changed later. Applications do not have direct access to vault pages, but awareness of their existence is helpful for understanding certain component APIs.

Please refer to the other topics in this section for more information about vaults:

• Multipart Vaults
• Using RootData
• Vault Corruption
• Vault Size

Multipart Vaults

CBFS Vault is capable of storing a single vault across multiple files on disk; this is known as a multipart vault. To create a multipart vault, set the PartSize configuration setting to a nonzero value before the vault is created. CBFS Vault will automatically create, resize, and delete individual part files as necessary over time (please refer to the Vault Size topic for more information).

Multipart vaults are typically used by applications that operate in environments with file size constraints. For example, if an application needed to store a 16 GB vault on a FAT32 filesystem, it could use a multipart vault with a 4 GB part size.

Existing vaults cannot be converted between multipart and non-multipart, and a multipart vault's size cannot be changed after creation. Also, multipart vaults are not supported in Callback Mode (because it already gives applications full control over how/where a vault is stored); the PartSize configuration setting is simply ignored.

Using RootData

All CBFS Vault vaults contain a special data stream called RootData that can be used for application-defined purposes. A vault's RootData stream can be accessed only using the OpenRootData method, because the stream is not part of the vault's filesystem hierarchy. The standalone nature of the RootData stream means the following:

• It does not have a path in the filesystem, which prevents it from being found using FindFirst or FindFirstByQuery.
• It cannot have any file tags, attributes, times, or alternate streams associated with it.
• It cannot be compressed using the SetFileCompression method.
• It cannot be encrypted using the SetFileEncryption method.

The RootData stream is also exempt from whole-vault encryption. This exemption is intentional; it allows applications that utilize whole-vault encryption to store information about that encryption (e.g., encrypted session keys, certificates, access control lists [ACLs]) within the vault, thus simplifying application design.

Vault Corruption

CBFS Vault vaults have a complex internal structure that may become corrupted if a vault is not closed properly or if some operation is interrupted. Typically, such things are caused by an application crash or a system crash, or (when operating in Callback Mode) as a result of an error in an event handler. Corruption can also occur if a vault's raw data are modified externally, either intentionally or because of storage failure.

When a vault is open, the IsCorrupted property can be queried to determine if has been corrupted. If a vault is corrupted, any operation may fail with a VAULT_ERR_VAULT_CORRUPTED error code.

Applications can attempt to fix a corrupted vault by calling the CheckAndRepair method. Always create a vault backup before calling CheckAndRepair, because in cases of severe corruption, it is possible for data to be lost during the repair process.

Journaling

To reduce the chances of vault corruption in the event of a crash, CBFS Vault can make use of journaling. Journaling works by wrapping vault modification operations in transactions, as follows:

1. A new transaction is opened by writing information about a change to a journal located within the vault.
2. The changes themselves are written to the vault.
3. The transaction is committed by writing another entry in the journal.

If a crash occurs, any interrupted modification operations will appear in a vault's journal as pending transactions. The next time CBFS Vault opens the vault, it will discover any pending transactions and automatically try to recover them. During the transaction recovery process, each transaction is either committed or rolled back, depending on its last known state.

Overall, journaling is an effective technique for maintaining data integrity. However, keep the following considerations in mind:

• When journaling is enabled, all file data changes incur additional write operations; this has a significant impact on overall write performance.
• Journaling does not provide any kind of data redundancy or consistency; it cannot protect against corruption caused by bit-rot, storage failures, or external modification of a vault's physical data.

CBFS Vault implements journaling as an operational mode rather than a vault attribute, and there is no such thing as a "journaled vault" or a "nonjournaled vault". Applications control whether the journaling mode is used by setting the JournalingMode parameter of the OpenVault method when opening a vault. Therefore, the same vault might be opened with journaling enabled at one point and may be opened without journaling enabled at another point.

The filesystem engine will always perform transaction recovery when a vault is opened (if transactions are pending in its journal), even if journaling is disabled.

Vault Size

By default, a vault grows automatically as more data are written to it, and it shrinks automatically when its free space percentage reaches the threshold defined by the AutoCompactAt property.

Applications can use the following properties to both control, and obtain information about, a vault's size. Please refer to each one's documentation for more information.

• VaultSizeMax: Specifies the maximum size a vault can be; 0 (unlimited) by default.
• VaultSizeMin: Specifies the minimum size a vault can be; 0 by default.
• VaultSize: Reflects a vault's actual size; and also can be used to explicitly resize a vault, keeping in mind the following:
  • A vault cannot shrink more than its available free space allows (i.e., not by more than VaultFreeSpace bytes).
  • A vault cannot shrink beyond VaultSizeMin bytes.
  • If VaultSizeMax is not 0 (unlimited), a vault cannot grow beyond VaultSizeMax bytes.
  • If a vault grows enough to reach or exceed its AutoCompactAt threshold, it will automatically shrink again when the next automatic compaction occurs.
• VaultFreeSpace: Reflects the actual amount of free space a vault has available.
• PossibleSize: Reflects the maximum size a vault could possibly be.
• PossibleFreeSpace: Reflects the maximum amount of free space a vault could possibly have available.