CBFilter Component

Properties   Methods   Events   Config Settings   Errors  

The CBFilter component allows applications to intercept and control filesystem requests.

Syntax

TcbfCBFilter

Remarks

The CBFilter component gives applications the ability to intercept filesystem requests, allowing them to be altered, handled, or blocked. Applications use standard filter rules to specify which requests they are interested in intercepting; and special filter rules to enforce access restrictions and redirect requests to different files.

To learn more about the component's capabilities, please refer to the product's General Information topics.

Getting Started

1. If the component's system driver has not been installed yet, call the Install method to do so. This needs to be done only once.
   • In production, the driver can be installed (or updated) ahead of time with the application's installation script using the Installer DLL. Please refer to the Driver Installation topic for more information.
2. Call the Initialize method to initialize the CBFilter component. This must be done each time the application starts.
3. Add one or more filter rules using methods like AddFilterRule. (Rules can also be added or removed after the filter is started.)
4. Call the StartFilter method to start filtering filesystem requests.
5. When finished, call the StopFilter method to stop filtering filesystem requests.
6. To uninstall the component's system driver, call the Uninstall method. This should not be done as part of the driver upgrade process.
   • In production, the driver can be uninstalled by the application's uninstallation script using the Installer DLL. Please refer to the Driver Installation topic for more information.

Property List

---

The following is the full list of the properties of the component with short descriptions. Click on the links for further details.

Method List

---

The following is the full list of the methods of the component with short descriptions. Click on the links for further details.

Event List

---

The following is the full list of the events fired by the component with short descriptions. Click on the links for further details.

Config Settings

---

The following is a list of config settings for the component with short descriptions. Click on the links for further details.

Active Property (CBFilter Component)

This property notes whether the component is active and processing requests.

Syntax

property Active: Boolean read get_Active;

Default Value

false

Remarks

This property reflects whether the component is active and currently processing requests. It will be True after the filter has been attached successfully via a call to StartFilter.

This property is read-only and not available at design time.

Altitude Property (CBFilter Component)

This property specifies the altitude the component's system driver should use .

Syntax

property Altitude: String read get_Altitude write set_Altitude;

Default Value

''

Remarks

This property specifies the altitude that the component's system driver should use . A driver's altitude determines its absolute position in the stack of filter drivers; drivers with higher altitudes are attached toward the top of the stack, closer to the user mode, which allows them to process requests earlier.

Microsoft manages and assigns filesystem minifilter driver altitudes directly, so an application-specific altitude value must be obtained from Microsoft before an application is deployed in production. Please refer to the Driver Altitudes topic for more information. During development, an appropriate arbitrary value, such as 360000 (which is not registered with Microsoft), can be used.

If this property is queried before an altitude has been set (via this property or the Install method), it will return an empty string.

Note: This property cannot be changed when Active is True. Additionally, the Initialize method must be called before attempting to get or set this property's value, which is stored in the registry.

DefaultRules Property (CBFilter Component)

This property includes the collection of default rules.

Syntax

property DefaultRules: TcbfFileDefaultRuleList read get_DefaultRules;

Remarks

This property holds a collection of FileDefaultRule objects, each of which represents a default rule. Please refer to the Default Rules topic for more information.

Use the following methods to manage default rules:

• AddDefaultRule
• DeleteDefaultRule
• SuspendDefaultRules

Note: Because default rules are managed by the component's system driver, this collection is not populated by default, nor is it updated by any of the aforementioned methods. Applications can call the CreateDefaultRulesSnapshot method to populate this collection; and must call the CloseDefaultRulesSnapshot method when finished working with it to release the associated memory.

Note: The methods and properties related to rule management are not intended to be used from multiple threads at once. Applications that wish to use said methods and properties from multiple threads (e.g., during the AfterFilterAttachToVolume and AfterFilterDetachFromVolume events) are responsible for employing proper thread synchronization techniques to ensure that manipulation and enumeration of the rule lists both occur in a thread-safe manner.

This property is read-only and not available at design time.

Please refer to the FileDefaultRule type for a complete list of fields.

FileFlushingBehavior Property (CBFilter Component)

This property specifies the file flushing and closing behavior that the component's system driver should enforce.

Syntax

property FileFlushingBehavior: Integer read get_FileFlushingBehavior write set_FileFlushingBehavior;

Default Value

0

Remarks

This property specifies what file flushing and closing behaviors the component's system driver should enforce.

Applications that modify file data as it is being read or written may need to change this property's value to function correctly. For example, applications that provide on-the-fly encryption should choose the proper flags to ensure that other applications that have opened the files being encrypted cannot accidentally write nonencrypted data to the disk.

Applications that do not modify file data as it is being read or written can leave this property unchanged.

The value of this property should be constructed by ORing together zero or more of the following flags:

FilterRules Property (CBFilter Component)

This property includes a collection of filter rules.

Syntax

property FilterRules: TcbfFileFilterRuleList read get_FilterRules;

Remarks

This property holds a collection of FileFilterRule objects, each of which represents a standard filter rule, access rule, or both. Please refer to the File and Registry Filter Rules and Access Rules topics for more information.

Use the following methods to manage the rules in this collection:

• AddFilterRule
• AddFilterRuleEx
• DeleteFilterRule
• DeleteAllFilterRules

Note: The methods and properties related to rule management are not intended to be used from multiple threads at once. Applications that wish to use said methods and properties from multiple threads (e.g., during the AfterFilterAttachToVolume and AfterFilterDetachFromVolume events) are responsible for employing proper thread synchronization techniques to ensure that manipulation and enumeration of the rule lists both occur in a thread-safe manner.

This property is read-only and not available at design time.

Please refer to the FileFilterRule type for a complete list of fields.

FireVolumeEvents Property (CBFilter Component)

This property specifies the events that should be fired when a filesystem volume is mounted to or unmounted from the system.

Syntax

property FireVolumeEvents: Integer read get_FireVolumeEvents write set_FireVolumeEvents;

Default Value

0

Remarks

This property specifies the events that the component should fire when a filesystem volume is mounted to or unmounted from the system. Possible values are as follows:

Note: The aforementioned events are fired only for volumes mounted/unmounted after the StartFilter method is called. Typically, applications use these events to dynamically add or remove volume-specific filter rules that target removable volumes (e.g., USB drives) as well as to create virtual files on such volumes. Please refer to the File Masks topic for more information.

PassthroughRules Property (CBFilter Component)

This property includes a collection of passthrough rules.

Syntax

property PassthroughRules: TcbfFilePassthroughRuleList read get_PassthroughRules;

Remarks

This property holds a collection of FilePassthroughRule objects, each of which represents a passthrough rule. Please refer to the Passthrough Rules topic for more information.

Use the following methods to manage the rules in this collection:

• AddPassthroughRule
• AddPassthroughRuleEx
• DeletePassthroughRule
• DeleteAllPassthroughRules

Note: The methods and properties related to rule management are not intended to be used from multiple threads at once. Applications that wish to use said methods and properties from multiple threads (e.g., during the AfterFilterAttachToVolume and AfterFilterDetachFromVolume events) are responsible for employing proper thread synchronization techniques to ensure that manipulation and enumeration of the rule lists both occur in a thread-safe manner.

This property is read-only and not available at design time.

Please refer to the FilePassthroughRule type for a complete list of fields.

ProcessCachedIORequests Property (CBFilter Component)

This property specifies whether cached file read/write requests should be processed.

Syntax

property ProcessCachedIORequests: Boolean read get_ProcessCachedIORequests write set_ProcessCachedIORequests;

Default Value

false

Remarks

This property specifies whether the component's system driver should process cached file read/write requests (i.e., fire *ReadFile and *WriteFile events for them). Please refer to the Cached and Non-Cached Requests topic for more information.

Note: This property cannot be changed when Active is True.

ProcessFailedRequests Property (CBFilter Component)

This property specifies whether failed requests should be processed.

Syntax

property ProcessFailedRequests: Boolean read get_ProcessFailedRequests write set_ProcessFailedRequests;

Default Value

false

Remarks

This property specifies whether the component's system driver should process failed requests (i.e., fire After* or Notify* events for them).

When this property is enabled, applications can inspect the Status parameter of the aforementioned events to determine whether an operation has failed. If an operation fails, then the corresponding event's Status parameter will contain a nonzero native status code. Applications generally can use the NtStatusToWin32Error method to convert these status codes into Win32 error codes (but keep in mind that not all native status codes have direct Win32 error code mapping).

ReparseRules Property (CBFilter Component)

This property includes a collection of reparse rules.

Syntax

property ReparseRules: TcbfFileReparseRuleList read get_ReparseRules;

Remarks

This property holds a collection of FileReparseRule objects, each of which represents a reparse rule. Please refer to the Reparse Rules topic for more information.

Use the following methods to manage reparse rules:

• AddReparseRule
• DeleteReparseRule
• DeleteAllReparseRules
• GetReparseRuleByMask

Note: Because reparse rules are managed by the component's system driver, this collection is not populated by default, nor is it updated by any of the aforementioned methods. Applications can call the CreateReparseRulesSnapshot method to populate this collection; and must call the CloseReparseRulesSnapshot method when finished working with it to release the associated memory.

Note: The methods and properties related to rule management are not intended to be used from multiple threads at once. Applications that wish to use said methods and properties from multiple threads (e.g., during the AfterFilterAttachToVolume and AfterFilterDetachFromVolume events) are responsible for employing proper thread synchronization techniques to ensure that manipulation and enumeration of the rule lists both occur in a thread-safe manner.

This property is read-only and not available at design time.

Please refer to the FileReparseRule type for a complete list of fields.

SerializeEvents Property (CBFilter Component)

Whether events should be fired on a single worker thread, or many.

Syntax

property SerializeEvents: TcbfTSerializeEvents read get_SerializeEvents write set_SerializeEvents;

TcbfTSerializeEvents = (
  seOnMultipleThreads,
  seOnOneWorkerThread
);

Default Value

seOnMultipleThreads

Remarks

This property specifies whether the component should fire all events serially on a single worker thread, or concurrently on multiple worker threads. The possible values are:

Please refer to the Threading and Concurrency topic for more information.

Note: This property cannot be changed when Active is True, and it cannot be changed within events.

Tag Property (CBFilter Component)

This property stores application-defined data specific to a particular instance of the component.

Syntax

property Tag: Int64 read get_Tag write set_Tag;

Default Value

0

Remarks

This property can be used to store data specific to a particular instance of the component.

AddBytesToWriteBuffer Method (CBFilter Component)

This method reserves extra space in the file data buffers used in file read/write events.

Syntax

function AddBytesToWriteBuffer(ExtraBytes: Integer): Boolean;

Remarks

Applications that plan to add additional data when files are being read or written should call this method to specify how much extra space to reserve in the file data buffers used in the BeforeReadFile, AfterReadFile, BeforeWriteFile, and AfterWriteFile events. If successful, this method returns True; otherwise, it returns False.

The ExtraBytes parameter specifies how many bytes to reserve.

Note: The value passed for this parameter must be a multiple of 512.

Note: This method cannot be called when Active is True.

AddDefaultRule Method (CBFilter Component)

This method adds a default rule.

Syntax

function AddDefaultRule(Mask: String; AccessFlags: Integer; ProductGUID: String): Boolean;

Remarks

This method adds a default rule for the files and directories that match the specified Mask. Each rule in a ruleset is uniquely identified by its mask; if a rule with the specified mask already exists, the new rule's parameters are merged into it.

If the rule is added successfully, this method returns True; otherwise, it returns False.

Default rules, like access rules, instruct the component's system driver to apply certain access restrictions to matching files and directories. However, unlike access rules, default rules are managed by the driver directly; they are activated as soon as the driver loads at boot time, and then continue to be enforced at all times, regardless of whether the application that added them is open.

The Mask parameter must be a valid file mask according to the File Masks topic. Only the files and directories that match the specified mask will be covered by the rule.

The AccessFlags parameter specifies which access restrictions the component's system driver should apply to matching files and directories. The value passed for this parameter should be constructed by ORing together zero or more of the following flags:

The ProductGUID parameter identifies the application that the rule should be associated with in the registry. In most cases, the value passed for this parameter should be the same one that was used to call the Initialize method.

This method requires administrative rights to execute successfully. If the user account of the process that calls this method doesn't have such rights, the call will fail with an ERROR_PRIVILEGE_NOT_HELD ($0522) error. Please refer to the Default Rules topic for more information.

Note: The methods and properties related to rule management are not intended to be used from multiple threads at once. Applications that wish to use said methods and properties from multiple threads (e.g., during the AfterFilterAttachToVolume and AfterFilterDetachFromVolume events) are responsible for employing proper thread synchronization techniques to ensure that manipulation and enumeration of the rule lists both occur in a thread-safe manner.

AddFilterRule Method (CBFilter Component)

This method adds a standard filter rule or access rule.

Syntax

function AddFilterRule(Mask: String; AccessFlags: Integer; ControlFlags: Int64; NotifyFlags: Int64): Boolean;

Remarks

This method adds a standard filter rule or access rule for the files and directories that match the specified Mask. Each rule in a ruleset is uniquely identified by its mask; if a rule with the specified mask already exists, the new rule's parameters are merged into it.

If the rule is added successfully, this method returns True; otherwise, it returns False.

Standard filter rules determine which filesystem operations, of those performed on matching files and directories, the component should fire its events for. Access rules instruct the component's system driver to apply certain access restrictions to matching files and directories.

The Mask parameter must be a valid file mask according to the File Masks topic. Only the files and directories that match the specified mask will be covered by the rule.

The AccessFlags parameter specifies which access restrictions the component's system driver should apply to matching files and directories. The value passed for this parameter should be constructed by ORing together zero or more of the following flags:

The ControlFlags parameter specifies which filesystem operations the component should fire Control Events for. For example, if the FS_CE_BEFORE_READ and FS_CE_AFTER_READ flags are present, the BeforeReadFile and AfterReadFile events will fire before and after a read operation is performed on any file that matches Mask. The value passed for this parameter should be constructed by ORing together zero or more of the following flags:

The NotifyFlags parameter specifies which filesystem operations the component should fire Notification Events for. For example, if the FS_NE_READ flag is present, the NotifyReadFile event will fire after a read operation is performed on any file that matches Mask. The value passed for this parameter should be constructed by ORing together zero or more of the following flags:

Note: The methods and properties related to rule management are not intended to be used from multiple threads at once. Applications that wish to use said methods and properties from multiple threads (e.g., during the AfterFilterAttachToVolume and AfterFilterDetachFromVolume events) are responsible for employing proper thread synchronization techniques to ensure that manipulation and enumeration of the rule lists both occur in a thread-safe manner.

AddFilterRuleEx Method (CBFilter Component)

This method adds a standard filter rule or access rule with additional match qualifiers.

Syntax

function AddFilterRuleEx(Mask: String; EaName: String; AccessFlags: Integer; ControlFlags: Int64; NotifyFlags: Int64; MinSize: Int64; MaxSize: Int64; IncludedAttributes: Int64; ExcludedAttributes: Int64): Boolean;

Remarks

This method adds a standard filter rule or access rule for the files and directories that match the specified Mask (which must be provided), and other qualifiers (which are optional). Each rule in a ruleset is uniquely identified by its mask; if a rule with the specified mask already exists, the new rule's parameters are merged into it.

If the rule is added successfully, this method returns True; otherwise, it returns False.

Standard filter rules determine which filesystem operations, of those performed on matching files and directories, the component should fire its events for. Access rules instruct the component's system driver to apply certain access restrictions to matching files and directories.

The Mask parameter must be a valid file mask according to the File Masks topic. Only the files and directories that match the specified mask will be covered by the rule.

The EaName parameter specifies the name of an extended attribute that a file or directory must have to qualify as a match; wildcards are not allowed. Pass an empty string if this parameter should not be used as a match qualifier.

The AccessFlags parameter specifies which access restrictions the component's system driver should apply to matching files and directories. The value passed for this parameter should be constructed by ORing together zero or more of the following flags:

The ControlFlags parameter specifies which filesystem operations the component should fire Control Events for. For example, if the FS_CE_BEFORE_READ and FS_CE_AFTER_READ flags are present, the BeforeReadFile and AfterReadFile events will fire before and after a read operation is performed on any file that matches Mask. The value passed for this parameter should be constructed by ORing together zero or more of the following flags:

The NotifyFlags parameter specifies which filesystem operations the component should fire Notification Events for. For example, if the FS_NE_READ flag is present, the NotifyReadFile event will fire after a read operation is performed on any file that matches Mask. The value passed for this parameter should be constructed by ORing together zero or more of the following flags:

The MinSize and MaxSize parameters specify the minimum and maximum size, in bytes, that a file can be to qualify as a match. Pass -1 for either parameter if it should not be used as a match qualifier.

The IncludedAttributes and ExcludedAttributes parameters specify which file attributes a file or directory must have or not have to qualify as a match. Pass 0 for either parameter if it should not be used as a match qualifier.

Note: The methods and properties related to rule management are not intended to be used from multiple threads at once. Applications that wish to use said methods and properties from multiple threads (e.g., during the AfterFilterAttachToVolume and AfterFilterDetachFromVolume events) are responsible for employing proper thread synchronization techniques to ensure that manipulation and enumeration of the rule lists both occur in a thread-safe manner.

AddPassthroughRule Method (CBFilter Component)

This method adds a passthrough rule.

Syntax

function AddPassthroughRule(Mask: String; AccessFlags: Integer; ControlFlags: Int64; NotifyFlags: Int64): Boolean;

Remarks

This method adds a passthrough rule for the files and directories that match the specified Mask. Each rule in a ruleset is uniquely identified by its mask; if a rule with the specified mask already exists, the new rule's parameters are merged into it.

If the rule is added successfully, this method returns True; otherwise, it returns False.

Passthrough rules exclude matching files and directories from being processed by other filter rules.

The Mask parameter must be a valid file mask according to the File Masks topic. Only the files and directories that match the specified mask will be covered by the rule.

The AccessFlags parameter specifies which access restrictions the component's system driver should lift from matching files and directories. The value passed for this parameter should be constructed by ORing together zero or more of the following flags:

The ControlFlags parameter specifies which filesystem operations the component should not fire Control Events for. The value passed for this parameter should be constructed by ORing together zero or more of the following flags:

The NotifyFlags parameter specifies which filesystem operations the component should not fire Notification Events for. The value passed for this parameter should be constructed by ORing together zero or more of the following flags:

Note: The methods and properties related to rule management are not intended to be used from multiple threads at once. Applications that wish to use said methods and properties from multiple threads (e.g., during the AfterFilterAttachToVolume and AfterFilterDetachFromVolume events) are responsible for employing proper thread synchronization techniques to ensure that manipulation and enumeration of the rule lists both occur in a thread-safe manner.

AddPassthroughRuleEx Method (CBFilter Component)

This method adds a passthrough rule with additional match qualifiers.

Syntax

function AddPassthroughRuleEx(Mask: String; EaName: String; AccessFlags: Integer; ControlFlags: Int64; NotifyFlags: Int64; MinSize: Int64; MaxSize: Int64; IncludedAttributes: Int64; ExcludedAttributes: Int64): Boolean;

Remarks

This method adds a passthrough rule for the files and directories that match the specified Mask (which must be provided) and other qualifiers (which are optional). Each rule in a ruleset is uniquely identified by its mask; if a rule with the specified mask already exists, the new rule's parameters are merged into it.

If the rule is added successfully, this method returns True; otherwise, it returns False.

Passthrough rules exclude matching files and directories from being processed by other filter rules.

The Mask parameter must be a valid file mask according to the File Masks topic. Only the files and directories that match the specified mask will be covered by the rule.

The EaName parameter specifies the name of an extended attribute that a file or directory must have to qualify as a match; wildcards are not allowed. Pass an empty string if this parameter should not be used as a match qualifier.

The AccessFlags parameter specifies which access restrictions the component's system driver should lift from matching files and directories. The value passed for this parameter should be constructed by ORing together zero or more of the following flags:

The ControlFlags parameter specifies which filesystem operations the component should not fire Control Events for. The value passed for this parameter should be constructed by ORing together zero or more of the following flags:

The NotifyFlags parameter specifies which filesystem operations the component should not fire Notification Events for. The value passed for this parameter should be constructed by ORing together zero or more of the following flags:

The MinSize and MaxSize parameters specify the minimum and maximum size, in bytes, that a file can be to qualify as a match. Pass -1 for either parameter if it should not be used as a match qualifier.

The IncludedAttributes and ExcludedAttributes parameters specify which file attributes a file or directory must have or not have to qualify as a match. Pass 0 for either parameter if it should not be used as a match qualifier.

Note: The methods and properties related to rule management are not intended to be used from multiple threads at once. Applications that wish to use said methods and properties from multiple threads (e.g., during the AfterFilterAttachToVolume and AfterFilterDetachFromVolume events) are responsible for employing proper thread synchronization techniques to ensure that manipulation and enumeration of the rule lists both occur in a thread-safe manner.

AddReparseRule Method (CBFilter Component)

This method adds a reparse rule.

Syntax

function AddReparseRule(Mask: String; ReparseMask: String; ProductGUID: String; Flags: Integer): Boolean;

Remarks

This method adds a reparse rule for the files and directories that match the specified Mask. Each rule in a ruleset is uniquely identified by its mask; if a rule with the specified mask already exists, the new rule replaces it.

If the rule is added successfully, this method returns True; otherwise, it returns False.

Reparse rules are used to redirect access from a file or directory covered by Mask to another location in the filesystem, specified by ReparseMask.

The Mask and ReparseMask parameters must be valid file masks according to the File Masks topic. Only the files and directories that match Mask will be covered by the rule (i.e., redirected to the path specified by ReparseMask). For example, passing *.txt for Mask and *_1.txt for ReparseMask would cause, for example, test.txt to be redirected to test_1.txt.

More generally, for each wildcard (* or ?) present in Mask, there must be a corresponding wildcard (of the same type) in ReparseMask; and the wildcards in ReparseMask must appear in the same order as they do in Mask. For example, if Mask is 20??_Budget.*, then 20??_Budget_Report.* would be a legal value for ReparseMask; but 20??_Budget_Report.xls would not be, nor would 20*_Budget_Report.*.

The ProductGUID parameter identifies the application that the rule should be associated with in the registry. In most cases, the value passed for this parameter should be the same one that was used to call the Initialize method.

The Flags parameter specifies how, exactly, the redirection should be performed. Possible values are as follows:

Note: The methods and properties related to rule management are not intended to be used from multiple threads at once. Applications that wish to use said methods and properties from multiple threads (e.g., during the AfterFilterAttachToVolume and AfterFilterDetachFromVolume events) are responsible for employing proper thread synchronization techniques to ensure that manipulation and enumeration of the rule lists both occur in a thread-safe manner.

CloseDefaultRulesSnapshot Method (CBFilter Component)

This method closes the previously created default rules snapshot.

Syntax

procedure CloseDefaultRulesSnapshot();

Remarks

This method closes the default rules snapshot previously created by CreateDefaultRulesSnapshot, releasing the memory associated with it. Please refer to that method's documentation for more information.

Note: This method cannot be called within events.

The methods and properties related to rule management are not intended to be used from multiple threads at once. Applications that wish to use said methods and properties from multiple threads (e.g., during the AfterFilterAttachToVolume and AfterFilterDetachFromVolume events) are responsible for employing proper thread synchronization techniques to ensure that manipulation and enumeration of the rule lists both occur in a thread-safe manner.

CloseReparseRulesSnapshot Method (CBFilter Component)

This method closes the previously created reparse rules snapshot.

Syntax

procedure CloseReparseRulesSnapshot();

Remarks

This method closes the reparse rules snapshot previously created by CreateReparseRulesSnapshot, releasing the memory associated with it. Please refer to that method's documentation for more information.

Note: This method cannot be called within events.

The methods and properties related to rule management are not intended to be used from multiple threads at once. Applications that wish to use said methods and properties from multiple threads (e.g., during the AfterFilterAttachToVolume and AfterFilterDetachFromVolume events) are responsible for employing proper thread synchronization techniques to ensure that manipulation and enumeration of the rule lists both occur in a thread-safe manner.

Config Method (CBFilter Component)

Sets or retrieves a configuration setting.

Syntax

function Config(ConfigurationString: String): String;

Remarks

Config is a generic method available in every component. It is used to set and retrieve configuration settings for the component.

These settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the component, access to these internal properties is provided through the Config method.

To set a configuration setting named PROPERTY, you must call Config("PROPERTY=VALUE"), where VALUE is the value of the setting expressed as a string. For boolean values, use the strings "True", "False", "0", "1", "Yes", or "No" (case does not matter).

To read (query) the value of a configuration setting, you must call Config("PROPERTY"). The value will be returned as a string.

CreateDefaultRulesSnapshot Method (CBFilter Component)

This method creates a snapshot of information about the default rules that have been added.

Syntax

procedure CreateDefaultRulesSnapshot(ProductGUID: String);

Remarks

This method creates a snapshot of information about all default rules that have been added by the application identified by ProductGUID. This information is then used to populate the DefaultRule* properties.

When the application is finished working with the default rules snapshot, it must close it by calling the CloseDefaultRulesSnapshot method to release the associated memory. If this method is called again before an existing snapshot is closed, the component will attempt to close it before creating a new one.

Note: This method cannot be called within events.

The methods and properties related to rule management are not intended to be used from multiple threads at once. Applications that wish to use said methods and properties from multiple threads (e.g., during the AfterFilterAttachToVolume and AfterFilterDetachFromVolume events) are responsible for employing proper thread synchronization techniques to ensure that manipulation and enumeration of the rule lists both occur in a thread-safe manner.

CreateFileDirect Method (CBFilter Component)

This method creates or opens a file or directory by passing the request directly to the filesystem.

Syntax

function CreateFileDirect(FileName: String; Synchronize: Boolean; DesiredAccess: Integer; ShareMode: Integer; CreationDisposition: Integer; FlagsAndAttributes: Integer; CloseImmediately: Boolean): Int64;

Remarks

This method should be used instead of the Windows API's CreateFile function to create or open a file or directory when an application needs to access it without sending requests through the filesystem filter driver stack.

The parameters of this method correspond to the parameters of the CreateFile function. The ShareMode parameter should be set by ORing together zero or more of the following flags:

If the file or directory is created or opened successfully, this method returns a file handle for it; otherwise, it returns INVALID_HANDLE_VALUE. The returned handle, if valid, must be closed using the Windows API's CloseHandle function when the application is finished with it.

If CloseImmediately is True, this method will create or open the specified file or directory and then immediately close the resulting handle. In this case, the handle will still be returned to indicate the success of the operation, but it will not be usable in any file operations.

Because all requests against the returned file handle are routed directly to the filesystem (bypassing all filter drivers, including the component's), applications can use it to call the Windows File API functions (ReadFile, WriteFile) within filesystem-related events without causing a system deadlock. However, pay special attention to the Synchronize parameter's documentation, which is given below.

The returned handle can be used with some of the Windows API functions that accept a file handle as a parameter. Support may vary depending on the internal implementation of each function. The following Windows API functions have been tested and proven to work:

• CloseHandle
• GetFileInformationByHandleEx
• GetFileSize
• GetFileType
• GetSecurityInfo (additional process privileges are required)
• ReadFile
• SetSecurityInfo (additional process privileges are required)
• WriteFile

Other functions may work as well but have not been tested.

Note: When calling the GetFileInformationByHandleEx function, only the following information classes are currently supported:

• FileAttributeTagInfo
• FileBasicInfo
• FileStandardInfo
• FileStreamInfo
• FileIdInfo

Support for other information classes depends on the class and OS capabilities.

The FileName, DesiredAccess, CreationDisposition, and FlagsAndAttributes parameters correspond to the lpFileName, dwDesiredAccess, dwCreationDisposition, and dwFlagsAndAttributes parameters of the Windows API's CreateFile function (respectively). Please refer to Microsoft's documentation for more information about how to set these parameters appropriately.

The file is opened with a sharing mode that allows other processes to open the file for any kind of operation.

The Synchronize parameter specifies whether this method and operations with the resulting handle should be synchronized with the thread that originated the underlying filesystem request associated with the current event (i.e., the event that this method was called from).

The parameter is applicable only when a caller uses it to open the file, for which the event was fired. Also, the parameter should not be set to True when this method is called from the AfterCloseFile event; when the event is fired, no file is open to synchronize operations with.

If Synchronize is True, this method and all operations with the resulting handle will be execute in the context of the external thread that originated the underlying filesystem request associated with the current event (which is important for on-the-fly file data modification like encryption), and the following restrictions will apply:

• The method may be called from any event handlers with the exception of AfterCloseFile and CleanupContext. Note: To be able to call the method from the BeforeCreateFile and BeforeOpenFile event handlers, set the AllowFileAccessInBeforeOpen configuration setting to True.
• The method should be called only for the file or directory that the event fired for.
• A file will be opened without buffering, which means that applications must comply with all restrictions imposed by the FILE_FLAG_NO_BUFFERING flag when reading and writing file data. Please refer to Microsoft's File Buffering article for more information.

There also exists a limitation in how the method works in the following scenario: if the method is called from a BeforeCreateFile or BeforeOpenFile event handler and the file doesn't exist and the method is used to create this file, then writing to this file from the same event handler will not work. The reason is that the file didn't exist at the moment when the event was fired, so the driver cannot synchronize the operations properly. The solution is to move the file writing step to the AfterCreateFile and AfterOpenFile event handler respectively. There, an application may use the handle obtained in BeforeCreateFile or BeforeOpenFile and write data to that file.

If Synchronize is False, this method and operations with the resulting handle are executed in the context of the thread in which the corresponding call is made, and the restrictions described above do not apply. This provides applications with greater flexibility because the returned file handle can be used in any event (as long as its handler complies with the general restrictions described by the Avoiding Deadlocks and Recursive Calls topics).

In both cases, the component must be active - that is, it must be started using a call to the StartFilter method.

CreateFileDirectAsStream Method (CBFilter Component)

This method creates or opens a file by passing the request directly to the filesystem.

Syntax

function CreateFileDirectAsStream(FileName: String; Synchronize: Boolean; DesiredAccess: Integer; ShareMode: Integer; CreationDisposition: Integer; FlagsAndAttributes: Integer; var Handle: Int64): TCBFSFilterStream;

Remarks

This method should be used instead of the Windows API's CreateFile function to create or open a file when an application needs to access it without sending requests through the filesystem filter driver stack.

The parameters of this method correspond to the parameters of the CreateFile function. The ShareMode parameter should be set by ORing together zero or more of the following flags:

If the file is created or opened successfully, this method returns a stream object that provides access to its data; otherwise, it returns nil. Upon success, the Handle parameter is populated with the handle value, which can be used to call SetFileSizeDirect or SetFileInformationDirect if needed.

Because all requests against the file are routed directly to the filesystem (bypassing all filter drivers, including the component's), applications can use the returned stream within filesystem-related events without causing a system deadlock. However, pay special attention to the Synchronize parameter's documentation, which is given below.

The FileName, DesiredAccess, CreationDisposition, and FlagsAndAttributes parameters correspond to the lpFileName, dwDesiredAccess, dwCreationDisposition, and dwFlagsAndAttributes parameters of the Windows API's CreateFile function (respectively). Please refer to Microsoft's documentation for more information about how to set these parameters appropriately.

The file is opened with a sharing mode that allows other processes to open the file for any kind of operation.

The Synchronize parameter specifies whether this method and operations with the resulting handle should be synchronized with the thread that originated the underlying filesystem request associated with the current event (i.e., the event that this method was called from).

The parameter is applicable only when a caller uses it to open the file, for which the event was fired. Also, the parameter should not be set to True when this method is called from the AfterCloseFile event; when the event is fired, no file is open to synchronize operations with.

If Synchronize is True, this method and all operations with the resulting handle will be execute in the context of the external thread that originated the underlying filesystem request associated with the current event (which is important for on-the-fly file data modification like encryption), and the following restrictions will apply:

• The method may be called from any event handlers with the exception of AfterCloseFile and CleanupContext. Note: To be able to call the method from the BeforeCreateFile and BeforeOpenFile event handlers, set the AllowFileAccessInBeforeOpen configuration setting to True.
• The method should be called only for the file or directory that the event fired for.
• A file will be opened without buffering, which means that applications must comply with all restrictions imposed by the FILE_FLAG_NO_BUFFERING flag when reading and writing file data. Please refer to Microsoft's File Buffering article for more information.

There also exists a limitation in how the method works in the following scenario: if the method is called from a BeforeCreateFile or BeforeOpenFile event handler and the file doesn't exist and the method is used to create this file, then writing to this file from the same event handler will not work. The reason is that the file didn't exist at the moment when the event was fired, so the driver cannot synchronize the operations properly. The solution is to move the file writing step to the AfterCreateFile and AfterOpenFile event handler respectively. There, an application may use the handle obtained in BeforeCreateFile or BeforeOpenFile and write data to that file.

If Synchronize is False, this method and operations with the resulting handle are executed in the context of the thread in which the corresponding call is made, and the restrictions described above do not apply. This provides applications with greater flexibility because the returned file handle can be used in any event (as long as its handler complies with the general restrictions described by the Avoiding Deadlocks and Recursive Calls topics).

In both cases, the component must be active - that is, it must be started using a call to the StartFilter method.

CreateReparseRulesSnapshot Method (CBFilter Component)

This method creates a snapshot of information about the reparse rules that have been added.

Syntax

procedure CreateReparseRulesSnapshot(ProductGUID: String);

Remarks

This method creates a snapshot of information about all reparse rules that have been added by the application identified by ProductGUID. This information is then used to populate the ReparseRule* properties.

When the application is finished working with the reparse rules snapshot, it must close it by calling the CloseReparseRulesSnapshot method to release the associated memory. If this method is called again before an existing snapshot is closed, the component will attempt to close it before creating a new one.

Note: This method cannot be called within events.

The methods and properties related to rule management are not intended to be used from multiple threads at once. Applications that wish to use said methods and properties from multiple threads (e.g., during the AfterFilterAttachToVolume and AfterFilterDetachFromVolume events) are responsible for employing proper thread synchronization techniques to ensure that manipulation and enumeration of the rule lists both occur in a thread-safe manner.

CreateVirtualFile Method (CBFilter Component)

This method is under construction.

Syntax

function CreateVirtualFile(FileName: String; DesiredAccess: Integer; ShareMode: Integer; CreationDisposition: Integer; FlagsAndAttributes: Integer): Int64;

Remarks

This method is under construction.

DeleteAllFilterRules Method (CBFilter Component)

This method deletes all standard filter rules and access rules.

Syntax

function DeleteAllFilterRules(): Boolean;

Remarks

This method deletes all standard filter rules and access rules that are currently present.

If the rules are deleted successfully, this method returns True; otherwise, it returns False.

To delete standard filter rules or access rules individually, use the DeleteFilterRule method instead.

Note: The methods and properties related to rule management are not intended to be used from multiple threads at once. Applications that wish to use said methods and properties from multiple threads (e.g., during the AfterFilterAttachToVolume and AfterFilterDetachFromVolume events) are responsible for employing proper thread synchronization techniques to ensure that manipulation and enumeration of the rule lists both occur in a thread-safe manner.

DeleteAllPassthroughRules Method (CBFilter Component)

This method deletes all passthrough rules.

Syntax

function DeleteAllPassthroughRules(): Boolean;

Remarks

This method deletes all passthrough rules that are currently present.

If the rules are deleted successfully, this method returns True; otherwise, it returns False.

To delete passthrough rules individually, use the DeletePassthroughRule method instead.

Note: The methods and properties related to rule management are not intended to be used from multiple threads at once. Applications that wish to use said methods and properties from multiple threads (e.g., during the AfterFilterAttachToVolume and AfterFilterDetachFromVolume events) are responsible for employing proper thread synchronization techniques to ensure that manipulation and enumeration of the rule lists both occur in a thread-safe manner.

DeleteAllReparseRules Method (CBFilter Component)

This method deletes all reparse rules.

Syntax

function DeleteAllReparseRules(ProductGUID: String): Boolean;

Remarks

This method deletes all reparse rules associated with the application identified by ProductGUID.

If the rules are deleted successfully, this method returns True; otherwise, it returns False.

In most cases, the value passed for the ProductGUID parameter should be the same one that was used to call the Initialize method. Please refer to the AddReparseRule method's documentation for more information.

To delete reparse rules individually, use the DeleteReparseRule method instead.

Note: The methods and properties related to rule management are not intended to be used from multiple threads at once. Applications that wish to use said methods and properties from multiple threads (e.g., during the AfterFilterAttachToVolume and AfterFilterDetachFromVolume events) are responsible for employing proper thread synchronization techniques to ensure that manipulation and enumeration of the rule lists both occur in a thread-safe manner.

DeleteDefaultRule Method (CBFilter Component)

This method deletes a particular default rule.

Syntax

function DeleteDefaultRule(Mask: String; AccessFlags: Integer; ProductGUID: String): Boolean;

Remarks

This method deletes the specified AccessFlags from the default rule identified by Mask and associated with the application identified by ProductGUID. If AccessFlags includes all flags currently present in the rule, then the entire rule is deleted; otherwise, the flags specified by AccessFlags are simply removed from the rule.

If the flags or this rule are deleted successfully, this method returns True; otherwise, it returns False.

The Mask parameter must be the file mask of an existing rule. If a rule with the specified mask cannot be found, this method will fail.

The AccessFlags parameter specifies which access restrictions should be removed from the rule. The value passed for this parameter should be constructed by ORing together zero or more of the following flags:

In most cases, the value passed for the ProductGUID parameter should be the same one that was used to call the Initialize method. Please refer to the AddDefaultRule method's documentation for more information.

This method requires administrative rights to execute successfully. If the user account of the process that calls this method doesn't have such rights, the call will fail with an ERROR_PRIVILEGE_NOT_HELD ($0522) error. Please refer to the Default Rules topic for more information.

Note: The methods and properties related to rule management are not intended to be used from multiple threads at once. Applications that wish to use said methods and properties from multiple threads (e.g., during the AfterFilterAttachToVolume and AfterFilterDetachFromVolume events) are responsible for employing proper thread synchronization techniques to ensure that manipulation and enumeration of the rule lists both occur in a thread-safe manner.

DeleteFilterRule Method (CBFilter Component)

This method deletes a particular standard filter rule or access rule.

Syntax

function DeleteFilterRule(Mask: String; AccessFlags: Integer; ControlFlags: Int64; NotifyFlags: Int64): Boolean;

Remarks

This method deletes the specified AccessFlags, ControlFlags, and/or NotifyFlags from the standard filter rule and/or access rule identified by Mask. If the aforementioned parameters include all flags currently present in the rule, then the entire rule is deleted; otherwise, the specified flags are simply removed from the rule.

If the flags or this rule are deleted successfully, this method returns True; otherwise, it returns False.

The Mask parameter must be the file mask of an existing rule. If a rule with the specified mask cannot be found, this method will fail.

The AccessFlags parameter specifies which access restrictions should be removed from the rule. The value passed for this parameter should be constructed by ORing together zero or more of the following flags:

The ControlFlags parameter specifies which Control Event flags should be removed from the rule. The value passed for this parameter should be constructed by ORing together zero or more of the following flags:

The NotifyFlags parameter specifies which Notification Event flags should be removed from the rule. The value passed for this parameter should be constructed by ORing together zero or more of the following flags:

To delete all standard filter rules and access rules, use the DeleteAllFilterRules method instead.

Note: The methods and properties related to rule management are not intended to be used from multiple threads at once. Applications that wish to use said methods and properties from multiple threads (e.g., during the AfterFilterAttachToVolume and AfterFilterDetachFromVolume events) are responsible for employing proper thread synchronization techniques to ensure that manipulation and enumeration of the rule lists both occur in a thread-safe manner.

DeletePassthroughRule Method (CBFilter Component)

This method deletes a particular passthrough rule.

Syntax

function DeletePassthroughRule(Mask: String; AccessFlags: Integer; ControlFlags: Int64; NotifyFlags: Int64): Boolean;

Remarks

This method deletes the specified AccessFlags, ControlFlags, and/or NotifyFlags from the passthrough rule identified by Mask. If the aforementioned parameters include all flags currently present in the rule, then the entire rule is deleted; otherwise, the specified flags are simply removed from the rule.

If the flags or this rule are deleted successfully, this method returns True; otherwise, it returns False.

The Mask parameter must be the file mask of an existing rule. If a rule with the specified mask cannot be found, this method will fail.

The AccessFlags parameter specifies which access restrictions should be removed from the rule. The value passed for this parameter should be constructed by ORing together zero or more of the following flags:

The ControlFlags parameter specifies which Control Event flags should be removed from the rule. The value passed for this parameter should be constructed by ORing together zero or more of the following flags:

The NotifyFlags parameter specifies which Notification Event flags should be removed from the rule. The value passed for this parameter should be constructed by ORing together zero or more of the following flags:

To delete all passthrough rules, use the DeleteAllPassthroughRules method instead.

Note: The methods and properties related to rule management are not intended to be used from multiple threads at once. Applications that wish to use said methods and properties from multiple threads (e.g., during the AfterFilterAttachToVolume and AfterFilterDetachFromVolume events) are responsible for employing proper thread synchronization techniques to ensure that manipulation and enumeration of the rule lists both occur in a thread-safe manner.

DeleteReparseRule Method (CBFilter Component)

This method deletes a particular reparse rule.

Syntax

function DeleteReparseRule(Mask: String; ProductGUID: String): Boolean;

Remarks

This method deletes the ReparseRules identified by Mask and associated with the application identified by ProductGUID.

If the flags or this rule are deleted successfully, this method returns True; otherwise, it returns False.

The Mask parameter must be the file mask of an existing rule. If a rule with the specified mask cannot be found, this method will fail.

In most cases, the value passed for the ProductGUID parameter should be the same one that was used to call the Initialize method. Please refer to the AddReparseRule method's documentation for more information.

To delete all reparse rules, use the DeleteAllReparseRules method instead.

Note: The methods and properties related to rule management are not intended to be used from multiple threads at once. Applications that wish to use said methods and properties from multiple threads (e.g., during the AfterFilterAttachToVolume and AfterFilterDetachFromVolume events) are responsible for employing proper thread synchronization techniques to ensure that manipulation and enumeration of the rule lists both occur in a thread-safe manner.

FileMatchesMask Method (CBFilter Component)

This method checks whether a particular file or directory name matches the specified mask.

Syntax

function FileMatchesMask(Mask: String; FileName: String; CaseSensitive: Boolean): Boolean;

Remarks

This method checks whether the file or directory name specified by FileName matches Mask; if it does, this method returns True. The CaseSensitive parameter controls whether a case-sensitive match should be performed.

Note: This method does not handle so-called DOS_* wildcards (DOS_STAR, DOS_QM, DOS_DOT). The explanation about the characters can be found in the MSDN article. If you have a mask that includes one of those characters on Windows, you can use the RtlIsNameInExpression function of Windows API.

Note: As the explanation states, "When you do a case-insensitive search and do not provide a translation table, the name is converted to uppercase."

GetDriverStatus Method (CBFilter Component)

This method retrieves the status of the component's system driver.

Syntax

function GetDriverStatus(ProductGUID: String): Integer;

Remarks

This method retrieves the status of the component's system driver. This status can then be used to verify whether it has been properly installed and is ready for use.

The value returned by the method corresponds to the dwCurrentState field of the SERVICE_STATUS structure from the Windows API. It will be one of the following:

ProductGUID is used to distinguish among driver installations performed by different applications. Such information is necessary to guard against unexpected situations, such as the driver being uninstalled by one application despite other applications still needing it.

Therefore, to ensure proper operation, it is critical that each individual application have its own unique ProductGUID value, and that applications (and their installation scripts) use that value when calling any of the following methods:

• Install
• Uninstall
• GetDriverStatus
• GetDriverVersion
• Initialize

This method is available in both the component API and the Installer DLL included with the product; please refer to the Driver Installation topic for more information about the latter.

Note: This method cannot be called within events.

GetDriverVersion Method (CBFilter Component)

This method retrieves the version of the component's system driver.

Syntax

function GetDriverVersion(ProductGUID: String): Int64;

Remarks

This method retrieves the version of the component's system driver. The value is returned as a 64-bit integer composed of four 16-bit words that each correspond to a piece of the overall module version. For example, a version of 2.32.6.28 would cause the value 0x000200200006001C to be returned.

If the component's system driver is not installed, this method returns 0.

ProductGUID is used to distinguish among driver installations performed by different applications. Such information is necessary to guard against unexpected situations, such as the driver being uninstalled by one application despite other applications still needing it.

Therefore, to ensure proper operation, it is critical that each individual application have its own unique ProductGUID value, and that applications (and their installation scripts) use that value when calling any of the following methods:

• Install
• Uninstall
• GetDriverStatus
• GetDriverVersion
• Initialize

This method is available in both the component API and the Installer DLL included with the product; please refer to the Driver Installation topic for more information about the latter.

Note: This method cannot be called within events.

GetEventFilename Method (CBFilter Component)

This method retrieves the name of the file or directory, to which the event applies.

Syntax

function GetEventFilename(): String;

Remarks

This method can be called within event handlers of events, related to the file or directory operations, to retrieve the name of the file or directory, to which the operation applies. If the query fails or an event does not have an associated filename, this method returns an empty string.

GetHandleCreatorProcessId Method (CBFilter Component)

This method retrieves the Id of the process (PID) that opened the file handle.

Syntax

function GetHandleCreatorProcessId(): Integer;

Remarks

This method can be called within certain events to retrieve the Id of the process (PID) that opened the file handle. If the query fails, this method returns 0.

Note: PIDs are not unique and may be reused by different processes over time (although in practice, this is uncommon).

Applications cannot use this method to retrieve information about remote processes accessing drives shared on the network. Windows does not provide such information due to the nature of remote access.

Note: This method can be called only within the AfterCreateFile and AfterOpenFile events, and must be called in the same thread that the event was originally fired on. Applications that need the information that this method returns during other events can do the following:

1. Call this method within the AfterCreateFile or AfterOpenFile event.
2. Store the information somewhere, and store a reference to it in the event's HandleContext parameter.
3. In a later event, access the information through the reference stored in HandleContext.

Please refer to the Contexts topic for more information on how to use events' context parameters.

Note: This method cannot be used from CleanupContext event handlers.

GetHandleCreatorProcessName Method (CBFilter Component)

This method retrieves the name of the process that opened the file handle.

Syntax

function GetHandleCreatorProcessName(): String;

Remarks

This method can be called within certain events to retrieve the name of the process that opened the file handle. If the query fails, this method returns an empty string.

Applications cannot use this method to retrieve information about remote processes accessing drives shared on the network. Windows does not provide such information due to the nature of remote access.

Note: This method can be called only within the AfterCreateFile and AfterOpenFile events, and must be called in the same thread that the event was originally fired on. Applications that need the information that this method returns during other events can do the following:

1. Call this method within the AfterCreateFile or AfterOpenFile event.
2. Store the information somewhere, and store a reference to it in the event's HandleContext parameter.
3. In a later event, access the information through the reference stored in HandleContext.

Please refer to the Contexts topic for more information on how to use events' context parameters.

Note: This method cannot be used from CleanupContext event handlers.

GetHandleCreatorThreadId Method (CBFilter Component)

This method retrieves the Id of the thread that opened the file handle.

Syntax

function GetHandleCreatorThreadId(): Integer;

Remarks

This method can be called within certain events to retrieve the Id of the thread that opened the file handle. If the query fails, this method returns 0.

Notes: Thread Ids are not unique and may be reused by different threads over time.

Note: This method can be called only within the AfterCreateFile and AfterOpenFile events, and must be called in the same thread that the event was originally fired on. Applications that need the information that this method returns during other events can do the following:

1. Call this method within the AfterCreateFile or AfterOpenFile event.
2. Store the information somewhere, and store a reference to it in the event's HandleContext parameter.
3. In a later event, access the information through the reference stored in HandleContext.

Please refer to the Contexts topic for more information on how to use events' context parameters.

Note: This method cannot be used from CleanupContext event handlers.

GetHandleCreatorToken Method (CBFilter Component)

This method retrieves the security token associated with the process that opened the file handle.

Syntax

function GetHandleCreatorToken(): Int64;

Remarks

This method can be called within certain events to retrieve the security token associated with the process that opened the file handle. If the query fails, this method returns INVALID_HANDLE_VALUE.

The security token returned by this method can be passed to the Windows API's GetTokenInformation function to obtain more information about the process.

Note: When applications are finished using the returned security token, they must close it using the Windows API's CloseHandle function.

Network Access Notes

Applications monitoring a drive shared on the network may wish to obtain information about the network users accessing it (e.g., account names). Drives can be shared in several modes in Windows, which can affect the information retrievable via the security token this method returns:

• Authenticated mode, in which case the network redirector (which, in general, is responsible for relaying remote drive requests to and from the system driver) will impersonate the network user, allowing that account's actual information to be retrieved.
• Guest mode, in which case the retrievable information is for the system's GUEST account.
• Administrative shares (those which exist by default and whose names end with '$'; e.g., C$, ADMIN$, etc.), in which case the retrievable information is for the LOCAL_SYSTEM account.

Note: This method can be called only within the AfterCreateFile and AfterOpenFile events, and must be called in the same thread that the event was originally fired on. Applications that need the information that this method returns during other events can do the following:

1. Call this method within the AfterCreateFile or AfterOpenFile event.
2. Store the information somewhere, and store a reference to it in the event's HandleContext parameter.
3. In a later event, access the information through the reference stored in HandleContext.

Please refer to the Contexts topic for more information on how to use events' context parameters.

Note: This method cannot be used from CleanupContext event handlers.

GetOperationTime Method (CBFilter Component)

This method returns the time at which the request was received by the filter driver.

Syntax

function GetOperationTime(): TDateTime;

Remarks

This method can be called within operation-related events to retrieve the time at which the filter driver received the request. The time is recorded before an event is fired but only when the RecordOperationTime configuration setting is enabled.

The timestamps returned by this method are specified in UTC.

GetOriginatorProcessId Method (CBFilter Component)

Retrieves the Id of the process (PID) that initiated the operation.

Syntax

function GetOriginatorProcessId(): Integer;

Remarks

This method can be called within events fired for filesystem operations to retrieve the Id of the process (PID) that initiated the operation. If the query fails, this method returns 0.

Please note that PIDs are not unique, and may be reused by different processes over time (though in practice, this is uncommon).

Applications cannot use this method to retrieve information about remote processes accessing drives shared on the network. Windows does not provide such information due to the nature of remote access.

Note: This method can be called only within events, and it must be called in the same thread that the event was originally fired on. However, it must not be called within events that work with opened files since such events can be initiated by system components (e.g., the cache manager, memory manager, etc.). If applications need the information this method returns during such events, they may do the following:

1. Call this method within the CreateFile or OpenFile event.
2. Store the information somewhere, and store a reference to it in the event's HandleContext parameter.
3. In a later event, access the information via the reference stored in HandleContext.

Please refer to the Contexts topic for more information on how to use events' context parameters.

Note: Renaming and deletion of files is performed after the file is opened. Thus, access checks should be performed during file opening as described above.

Note: This method cannot be used from CleanupContext event handlers.

GetOriginatorProcessName Method (CBFilter Component)

Retrieves the name of the process that initiated the operation.

Syntax

function GetOriginatorProcessName(): String;

Remarks

This method can be called within events fired for filesystem operations to retrieve the name of the process that initiated the operation. If the query fails, this method returns empty string.

Applications cannot use this method to retrieve information about remote processes accessing drives shared on the network. Windows does not provide such information due to the nature of remote access.

Note: This method can be called only within events, and it must be called in the same thread that the event was originally fired on. However, it must not be called within events that work with opened files since such events can be initiated by system components (e.g., the cache manager, memory manager, etc.). If applications need the information this method returns during such events, they may do the following:

1. Call this method within the CreateFile or OpenFile event.
2. Store the information somewhere, and store a reference to it in the event's HandleContext parameter.
3. In a later event, access the information via the reference stored in HandleContext.

Please refer to the Contexts topic for more information on how to use events' context parameters.

Note: Renaming and deletion of files is performed after the file is opened. Thus, access checks should be performed during file opening as described above.

Note: This method cannot be used from CleanupContext event handlers.

GetOriginatorThreadId Method (CBFilter Component)

Retrieves the Id of the thread that initiated the operation.

Syntax

function GetOriginatorThreadId(): Integer;

Remarks

This method can be called within events fired for filesystem operations to retrieve the Id of the thread that initiated the operation. If the query fails, this method returns 0.

Please note that thread Ids are not unique, and may be reused by different threads over time.

Note: This method can be called only within events, and it must be called in the same thread that the event was originally fired on. However, it must not be called within events that work with opened files since such events can be initiated by system components (e.g., the cache manager, memory manager, etc.). If applications need the information this method returns during such events, they may do the following:

1. Call this method within the CreateFile or OpenFile event.
2. Store the information somewhere, and store a reference to it in the event's HandleContext parameter.
3. In a later event, access the information via the reference stored in HandleContext.

Please refer to the Contexts topic for more information on how to use events' context parameters.

Note: Renaming and deletion of files is performed after the file is opened. Thus, access checks should be performed during file opening as described above.

Note: This method cannot be used from CleanupContext event handlers.

GetOriginatorToken Method (CBFilter Component)

Retrieves the security token associated with the process that initiated the operation.

Syntax

function GetOriginatorToken(): Int64;

Remarks

This method can be called within synchronous, i.e., Before* and After* events fired for filesystem operations to retrieve the security token associated with the process that initiated the operation. If the query fails, this method returns INVALID_HANDLE_VALUE. Note: This method will not work properly when called from Notify* event handlers because security tokens are not kept for possible later use. If you need to obtain security information about a request, use corresponding After* events.

The security token returned by this method can be passed to the Windows API's GetTokenInformation function to obtain more information about the process.

Important: When applications are finished using the returned security token, they must close it using the Windows API's CloseHandle function.

Network Access Notes

Applications monitoring a drive shared on the network may wish to obtain information about the network users accessing it (e.g., account names). Drives can be shared in several modes in Windows, which can affect the information retrievable via the security token this method returns:

• Authenticated mode, in which case the network redirector (which, in general, is responsible for relaying remote drive requests to and from the system driver) will impersonate the network user, allowing that account's actual information to be retrieved.
• Guest mode, in which case the retrievable information is for the system's GUEST account.
• Administrative shares (those which exist by default and whose names end with '$'; e.g., C$, ADMIN$, etc.), in which case the retrievable information is for the LOCAL_SYSTEM account.

Note: This method can be called only within events, and it must be called in the same thread that the event was originally fired on. However, it must not be called within events that work with opened files since such events can be initiated by system components (e.g., the cache manager, memory manager, etc.). If applications need the information this method returns during such events, they may do the following:

1. Call this method within the CreateFile or OpenFile event.
2. Store the information somewhere, and store a reference to it in the event's HandleContext parameter.
3. In a later event, access the information via the reference stored in HandleContext.

Please refer to the Contexts topic for more information on how to use events' context parameters.

Note: Renaming and deletion of files is performed after the file is opened. Thus, access checks should be performed during file opening as described above.

Note: This method cannot be used from CleanupContext event handlers.

GetRemoteAccessInformation Method (CBFilter Component)

This method returns networking-related information about the operation.

Syntax

procedure GetRemoteAccessInformation(var ShareName: String; ClientSocketAddressBuffer: Pointer; var ClientSocketAddressBufferSize: Integer);

Remarks

Call this method from *CreateFile/*OpenFile events to retrieve the collected networking details information related to the filesystem operation performed across the network.

Note: The information will be available only when the CollectRemoteOpenInformation configuration setting is enabled.

This method returns the contents of one of two structures, SRV_OPEN_ECP_CONTEXT or NFS_OPEN_ECP_CONTEXT. These structures contain various networking information that differs depending on the remote access type. Please refer to MSDN for additional information.

Depending on the type of remote access, the information is extracted from one of those structures. When the method returns, ShareName will contain the value of either ShareName or ExportAlias field of the corresponding structure. ClientSocketAddressBuffer will contain the value of the SocketAddress or ClientSocketAddress field of the corresponding structure. This field is a structure of the SOCKADDR_STORAGE_NFS type.

When calling the method, an application needs to prepare the buffer of the required size and specify this size of the ClientSocketAddressBuffer buffer in the ClientSocketAddressBufferSize argument.

GetReparseRuleByMask Method (CBFilter Component)

This method retrieves the reparse rule associated with the specified file mask.

Syntax

function GetReparseRuleByMask(Mask: String; ProductGUID: String): String;

Remarks

This method retrieves the reparse rule identified by Mask and associated with the application identified by ProductGUID. If such a reparse rule is found, this method returns its reparse mask (see AddReparseRule); otherwise, it returns empty string.

The Mask parameter must be the file mask of an existing rule.

In most cases, the value passed for the ProductGUID parameter should be the same one that was used to call the Initialize method.

Note: The methods and properties related to rule management are not intended to be used from multiple threads at once. Applications that wish to use said methods and properties from multiple threads (e.g., during the AfterFilterAttachToVolume and AfterFilterDetachFromVolume events) are responsible for employing proper thread synchronization techniques to ensure that manipulation and enumeration of the rule lists both occur in a thread-safe manner.

GetVolumeGUID Method (CBFilter Component)

This method retrieves the volume GUID of the device targeted by a filesystem operation.

Syntax

function GetVolumeGUID(): String;

Remarks

This method can be called within events fired for filesystem operations to retrieve the volume GUID of the device targeted by the operation, returned in the Volume{xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx} format. If the query fails, this method returns an empty string.

Volume GUIDs can be used to enumerate the mounting points of a device using the Windows API's GetVolumePathNamesForVolumeName function.

Note: This method can be called only within events.

Initialize Method (CBFilter Component)

This method initializes the component.

Syntax

procedure Initialize(ProductGUID: String);

Remarks

This method initializes the component and must be called each time the application starts before attempting to call any of the component's other methods with the exception of installation-related methods.

ProductGUID is used to distinguish among driver installations performed by different applications. Such information is necessary to guard against unexpected situations, such as the driver being uninstalled by one application despite other applications still needing it.

Therefore, to ensure proper operation, it is critical that each individual application have its own unique ProductGUID value, and that applications (and their installation scripts) use that value when calling any of the following methods:

• Install
• Uninstall
• GetDriverStatus
• GetDriverVersion
• Initialize

If the required driver was not installed using the Install method with the same value of ProductGUID, Initialize will return a ERROR_FILE_NOT_FOUND error (Win32 error code 2).

If the loaded kernel-mode driver is older than the user-mode API, Initialize will return a ERROR_INVALID_KERNEL_INFO_VERSION error (Win32 error code 340). In this situation, an update of the driver using the Install method is required before the component can be used.

Install Method (CBFilter Component)

This method installs (or upgrades) the component's system driver.

Syntax

function Install(CabFileName: String; ProductGUID: String; PathToInstall: String; Altitude: String; Flags: Integer): Boolean;

Remarks

This method is used to install or upgrade the component's system driver. If the system must be rebooted to complete the installation process, this method returns True; otherwise, it returns False.

Important: To upgrade the component's driver, use only the Install method. Previously installed versions of the driver should not be uninstalled first. Calling the Install method will upgrade the previously installed version.

Please refer to the Driver Installation topic for more information.

CabFileName must be the path of the cbfilter.cab file containing the component's system driver.

Note: This .cab file must remain on the target system (or be available in some other way) after installation, as it is required to uninstall the driver from the system.

ProductGUID is used to distinguish among driver installations performed by different applications. Such information is necessary to guard against unexpected situations, such as the driver being uninstalled by one application despite other applications still needing it.

Therefore, to ensure proper operation, it is critical that each individual application have its own unique ProductGUID value, and that applications (and their installation scripts) use that value when calling any of the following methods:

• Install
• Uninstall
• GetDriverStatus
• GetDriverVersion
• Initialize

PathToInstall controls where the driver is installed. Pass empty string (highly recommended) to automatically install them to the appropriate Windows system directory.

Altitude specifies the driver altitude to use . During development, you can use any acceptable altitude value. For deployment, an altitude value must be assigned by Microsoft before deploying a filesystem minifilter in production. After installation, the altitude can be changed at any time using the Altitude property. Please refer to the Driver Altitudes topic for more information.

Flags specifies various installation options. It should contain zero or more of the following flags, ORed together:

Note: Enabling the AlwaysPrepareFiles and/or SendRequestsViaDriverStack configuration settings before calling this method will cause the corresponding flags to be added automatically. These configuration settings can also be used to toggle the corresponding options at any time after installation.

This method is available in both the component API and the Installer DLL included with the product; please refer to the Driver Installation topic for more information about the latter.

This method requires administrative rights to execute successfully. If the user account of the process that calls this method doesn't have such rights, the call will fail with an ERROR_PRIVILEGE_NOT_HELD ($0522) error.

Note: This method cannot be called within events.

IsFileFiltered Method (CBFilter Component)

This method checks whether a particular file or directory is covered by any filter rules.

Syntax

function IsFileFiltered(FileName: String): Boolean;

Remarks

This method checks whether the file or directory specified by FileName is covered by any of the standard filter rules active currently (i.e., whether the component would fire its events for one or more kinds of filesystem operations performed on it). If the specified file or directory matches any of the active standard filter rules, this method returns True; otherwise, it returns False.

Applications should use this method anytime they want to create/open some file or directory from within an event handler. If this method returns True, then the file or directory must be created/opened using the component's CreateFileDirect method rather than the Windows API's CreateFile function, because the latter could trigger recursion and cause a system deadlock.

NtStatusToWin32Error Method (CBFilter Component)

This method converts a native status code to a Win32 error code.

Syntax

function NtStatusToWin32Error(Status: Integer): Integer;

Remarks

This method converts the native status code specified by Status to a Win32 error code. If the specified native status code does not map directly to a Win32 error code, this method returns ERROR_MR_MID_NOT_FOUND (317).

ResetTimeout Method (CBFilter Component)

This method resets the timeout duration for the current event handler.

Syntax

function ResetTimeout(Timeout: Integer): Boolean;

Remarks

When event timeouts are being enforced, this method can be called within an event handler to inform the component that request processing is taking longer than expected.

If called successfully, this method returns True, and the current event handler's timeout timer is immediately reset to 0; when it reaches the number of milliseconds specified by Timeout, the driver will either "release" the underlying request and pass it onwards, or cancel it by reporting an error; whichever is most appropriate for the event in question. Please refer to the Timeouts topic for more information.

Passing 0 for Timeout disables the timeout timer for the current event handler, allowing it to take as long as it needs to complete.

Note: When several events are fired for the same file concurrently (if the SerializeAccess configuration setting is disabled), and ResetTimeout is called from one of the handlers of these events, this method will reset the timer for all currently executed event handlers.

Note: This method can be called only within events.

SetFileInformationDirect Method (CBFilter Component)

This method sets the file information of a file opened using CreateFileDirect.

Syntax

procedure SetFileInformationDirect(FileHandle: Int64; InformationClass: Integer; FileInformation: TBytes);

Remarks

Applications may call this method to change various kinds of information about a file that was opened using the CreateFileDirect method.

The FileHBut Iandle parameter specifies the file that should be updated. The value passed for this parameter must be a file handle obtained from the CreateFileDirect method; please refer to its documentation for more information.

The InformationClass parameter specifies the class of information to be set. For the list of supported classes, please refer to the documentation of the Windows API's FltSetInformationFile function.

Note: Only a limited subset of classes comparing to similar functions like NtSetInformationFile or NtQueryInformationFile is supported by this function.

FileInformation is a buffer that must contain the information to be set. The exact size and format of the information depend on InformationClass and are described in the FltSetInformationFile help topic.

SetFileSizeDirect Method (CBFilter Component)

This method resizes a file by passing the request directly to the filesystem.

Syntax

function SetFileSizeDirect(FileHandle: Int64; Size: Int64): Boolean;

Remarks

Applications can call this method in filesystem-related event handlers to resize a file without sending the request through the filesystem filter driver stack. If the file is resized successfully, this method returns True; otherwise, it returns False.

The FileHandle parameter specifies the file that should be resized. The value passed for this parameter must be a file handle obtained from the CreateFileDirect method; please refer to its documentation for more information.

The Size parameter specifies the new file size, in bytes.

To set file allocation size or valid file length, you may use the SetFileInformationDirect method.

Note: This method can be called only within events.

ShutdownSystem Method (CBFilter Component)

Shuts down or reboots the operating system.

Syntax

function ShutdownSystem(ShutdownPrompt: String; Timeout: Integer; ForceCloseApps: Boolean; Reboot: Boolean): Boolean;

Remarks

This method shuts down or (if Reboot is True) reboots the operating system. If the appropriate privileges cannot be obtained, or if the InitiateSystemShutdown system call returns False, then this method will return False; otherwise, it returns True. This method can be used if the installation or uninstallation function requires the system to be rebooted in order to complete.

ShutdownPrompt, if non-empty, specifies a message that the OS should display to the user for Timeout seconds. If empty string is passed for ShutdownPrompt, no message is displayed and the Timeout parameter's value is ignored.

ForceCloseApps specifies whether the OS should forcefully close all applications. Please keep in mind that forceful closing of applications with unsaved data can lead to data loss.

Reboot specifies whether the OS should reboot (True) or just shut down (False).

This method is available in both the component API and the Installer DLL included with the product; please refer to the Driver Installation topic for more information about the latter.

Note: This method cannot be called within events.

StartFilter Method (CBFilter Component)

This method starts filtering filesystem operations.

Syntax

procedure StartFilter(Timeout: Integer);

Remarks

This method attaches the filter, causing the component's system driver to start filtering filesystem operations according to the filter rules currently present. Rules can be added and removed both before and after this method is called, so long as the Initialize method is called before doing anything else.

The Timeout parameter specifies how many milliseconds the driver should wait for events to execute before releasing or cancelling the underlying OS requests; please refer to the Timeouts topic for more information. Valid values are 0, which disables event timeouts, and values greater than or equal to 3000. When event timeouts are in effect, event handlers can call ResetTimeout to reset the timer if they require additional time to complete.

This method can fail for a number of reasons, including (but not limited to) the following:

• If the component's system driver has not been properly installed, or is awaiting a system reboot (as indicated by the return value of Install), this method fails with an ERROR_FILE_NOT_FOUND (2) error code.
• If the Initialize method has not been called yet, this method fails with an ERROR_NOT_READY (21) error code.
• If the filter is already Active, this method fails with an ERROR_CONNECTION_ACTIVE (1230) error code.
• If an invalid value is passed for Timeout, this method fails with an ERROR_IMPLEMENTATION_LIMIT (1292) error code.

StopFilter Method (CBFilter Component)

This method stops filtering filesystem operations.

Syntax

procedure StopFilter(Reserved: Boolean);

Remarks

This method detaches the filter, causing the component's system driver to stop filtering filesystem operations. This method will block until all pending requests have been completed and the filter has been detached.

The Reserved parameter is obsolete.

SuspendDefaultRules Method (CBFilter Component)

This method suspends all default rules until the application exits.

Syntax

function SuspendDefaultRules(ProductGUID: String): Boolean;

Remarks

This method suspends (i.e., deactivates) all default rules associated with the application identified by ProductGUID until the application exits. If the rules are suspended successfully, this method returns True; otherwise, it returns False.

In most cases, the value passed for the ProductGUID parameter should be the same one that was used to call the Initialize method.

When the application exits, the component's system driver will reactivate the suspended rules and start enforcing them once again.

SuspendFileEvents Method (CBFilter Component)

This method suspends all events for a particular file or directory until all of its handles have been closed.

Syntax

procedure SuspendFileEvents();

Remarks

Applications can call this method from an AfterCreateFile or AfterOpenFile event to suspend all further events for the file or directory that the event fired for. The suspension will remain in effect until all handles to said file or directory have been closed, at which point the component will once again fire events for it (if it is accessed again).

Typically, this method should be used only as a "last resort"; that is, when the application cannot achieve the same outcome through the use of more granular standard filter rules. Said another way, it is almost always more efficient for an application to exclude files or directories implicitly using standard filter rules, if possible, than it is to exclude them explicitly using this method.

Note: This method can be called only within the AfterCreateFile and AfterOpenFile events.

ToggleProcessProtection Method (CBFilter Component)

This method enables or disables termination protection for the application.

Syntax

function ToggleProcessProtection(Enabled: Boolean): Boolean;

Remarks

This method controls the termination protection mechanism, which applications can enable to prevent their process and threads from being terminated. If successful, this method returns True; otherwise, it returns False.

The Enabled parameter specifies whether termination protection should be enabled (True) or disabled (False); it is disabled by default. If termination protection is enabled, an application must disable it before attempting to exit.

Note: When developing a GUI-based application, please keep in mind that the termination protection mechanism does not intercept Windows' notifications like WM_CLOSE or WM_QUIT; applications must intercept and handle such messages themselves if they wish to protect their UI. Please refer to Microsoft's Window Notifications articles for more information.

Uninstall Method (CBFilter Component)

This method uninstalls the component's system driver.

Syntax

function Uninstall(CabFileName: String; ProductGUID: String; InstalledPath: String; Flags: Integer): Boolean;

Remarks

This method is used to uninstall the component's system driver. If the system must be rebooted to complete the uninstallation process, this method returns True; otherwise, it returns False.

Important: To upgrade the component's driver, use only the Install method. Previously installed versions of the driver should not be uninstalled first. Calling the Install method will upgrade the previously installed version.

Please refer to the Driver Installation topic for more information.

The same values must be passed for the CabFileName, ProductGUID, and InstalledPath parameters as were passed when Install was called; please refer to its documentation for more information.

Flags specifies which versions of the component's system driver should be uninstalled and which should be set by ORing together one or more of the following values:

This method is available in both the component API and the Installer DLL included with the product; please refer to the Driver Installation topic for more information about the latter.

This method requires administrative rights to execute successfully. If the user account of the process that calls this method doesn't have such rights, the call will fail with an ERROR_PRIVILEGE_NOT_HELD ($0522) error.

Note: This method cannot be called within events.

AfterCanFileBeDeleted Event (CBFilter Component)

This event fires after the OS marks a file or directory for deletion or removes such a mark.

Syntax

type TAfterCanFileBeDeletedEvent = procedure (
  Sender: TObject;
  const FileName: String;
  RequestType: Integer;
  CanDelete: Boolean;
  var Status: Integer;
  var FileContext: Pointer;
  var HandleContext: Pointer;
  var ResultCode: Integer
) of Object;

property OnAfterCanFileBeDeleted: TAfterCanFileBeDeletedEvent read FOnAfterCanFileBeDeleted write FOnAfterCanFileBeDeleted;

Remarks

This event fires after the OS marks the file or directory specified by FileName for deletion or removes such a mark.

If the file or directory is marked for deletion, they will not be removed immediately but will actually be removed when the last handle is closed. Moreover, it is possible that a future call to a system function will remove the mark, so this event is not a final indicator that the file or directory will be deleted.

Files and directories can be deleted in two ways: (1) a file or directory can be opened with the FILE_FLAG_DELETE_ON_CLOSE flag, or (2) some process may call Windows API's NtSetInformationFile function with FILE_DISPOSITION_INFORMATION or FILE_DISPOSITION_INFORMATION_EX structure as a parameter.

If the file or directory is created or opened with the FILE_FLAG_DELETE_ON_CLOSE flag, this event is fired shortly after the AfterCreateFile or AfterOpenFile event.

The RequestType indicates which kind of system request resulted in firing this event. It can be one of the following:

Applications need to handle this event only if they have added a standard filter rule that includes [the TBD]. FS_CE_AFTER_CAN_DELETE flag.

Note: Not everything is possible or allowed in the event handlers. For details, see the Recursive Calls topic.

The CanDelete parameter reflects whether the file or directory will be deleted.

The Status parameter contains an NT status code that indicates the outcome of the operation; 0 indicates success. To convert this value to a Win32 error code, call the NtStatusToWin32Error method.

Note: This event will not fire for failed requests unless the ProcessFailedRequests property is enabled. Applications may change this parameter's value if they want a different NT status code to be returned.

The FileContext and HandleContext parameters are placeholders for application-defined data associated with the file and specific handle, respectively. Please refer to the Contexts topic for more information.

The ResultCode parameter will always be 0 when the event is fired. If the event cannot be handled in a "successful" manner for some reason (e.g., a resource is not available or security checks failed), set it to a nonzero value to report an appropriate error. Please see the Error Reporting and Handling topic for more information.

This event is fired synchronously; please refer to the Event Types topic for more information.

AfterCleanupFile Event (CBFilter Component)

This event fires after a file or directory handle is closed.

Syntax

type TAfterCleanupFileEvent = procedure (
  Sender: TObject;
  const FileName: String;
  var FileContext: Pointer;
  var HandleContext: Pointer;
  var ResultCode: Integer
) of Object;

property OnAfterCleanupFile: TAfterCleanupFileEvent read FOnAfterCleanupFile write FOnAfterCleanupFile;

Remarks

This event fires after a handle to the file or directory specified by FileName is closed. This event differs from AfterCloseFile in that AfterCleanupFile fires immediately after an open handle to the specified file or directory is closed by a process, whereas AfterCloseFile may be fired much later when the OS decides that the file or directory can be formally closed.

Other events may fire for the file or directory in the time between when this event fires and when the AfterCloseFile event fires. For example, system components, such as the memory manager or cache manager, may cause the AfterReadFile and AfterWriteFile events to fire.

Applications need to handle this event only if they have added a standard filter rule that includes [the TBD]. FS_CE_AFTER_CLEANUP flag.

Note: Not everything is possible or allowed in the event handlers. For details, see the Recursive Calls topic.

The FileContext and HandleContext parameters are placeholders for application-defined data associated with the file and specific handle, respectively. Please refer to the Contexts topic for more information.

The ResultCode parameter will always be 0 when the event is fired. If the event cannot be handled in a "successful" manner for some reason (e.g., a resource is not available or security checks failed), set it to a nonzero value to report an appropriate error. Please see the Error Reporting and Handling topic for more information.

This event is fired synchronously; please refer to the Event Types topic for more information.

AfterCloseEnumeration Event (CBFilter Component)

This event fires after a directory enumeration operation finishes.

Syntax

type TAfterCloseEnumerationEvent = procedure (
  Sender: TObject;
  const DirectoryName: String;
  DirectoryContext: Pointer;
  HandleContext: Pointer;
  EnumerationContext: Pointer;
  var ResultCode: Integer
) of Object;

property OnAfterCloseEnumeration: TAfterCloseEnumerationEvent read FOnAfterCloseEnumeration write FOnAfterCloseEnumeration;

Remarks

This event fires after enumeration of the directory specified by DirectoryName finishes.

Applications need to handle this event only if they have added a standard filter rule that includes [the TBD]. FS_CE_BEFORE_CLOSE flag (directory enumerations are typically closed immediately before a directory is closed).

Note: Not everything is possible or allowed in the event handlers. For details, see the Recursive Calls topic.

The EnumerationContext parameter is a placeholder for application-defined data associated with the enumeration. Please refer to the Contexts topic for more information.

The ResultCode parameter will always be 0 when the event is fired. If the event cannot be handled in a "successful" manner for some reason (e.g., a resource is not available or security checks failed), set it to a nonzero value to report an appropriate error. Please see the Error Reporting and Handling topic for more information.

This event is fired synchronously; please refer to the Event Types topic for more information.

AfterCloseFile Event (CBFilter Component)

This event fires after a file or directory is closed.

Syntax

type TAfterCloseFileEvent = procedure (
  Sender: TObject;
  const FileName: String;
  var FileContext: Pointer;
  var HandleContext: Pointer;
  var ResultCode: Integer
) of Object;

property OnAfterCloseFile: TAfterCloseFileEvent read FOnAfterCloseFile write FOnAfterCloseFile;

Remarks

This event fires after the file or directory specified by FileName is closed.

Applications need to handle this event only if they have added a standard filter rule that includes [the TBD]. FS_CE_AFTER_CLOSE flag.

Note: Not everything is possible or allowed in the event handlers. For details, see the Recursive Calls topic.

The FileContext and HandleContext parameters are placeholders for application-defined data associated with the file and specific handle, respectively. Please refer to the Contexts topic for more information.

If the file or directory was marked for deletion earlier, the AfterDeleteFile will fire shortly before this event.

The ResultCode parameter will always be 0 when the event is fired. If the event cannot be handled in a "successful" manner for some reason (e.g., a resource is not available or security checks failed), set it to a nonzero value to report an appropriate error. Please see the Error Reporting and Handling topic for more information.

This event is fired synchronously; please refer to the Event Types topic for more information.

AfterCreateFile Event (CBFilter Component)

This event fires after a file or directory is created.

Syntax

type TAfterCreateFileEvent = procedure (
  Sender: TObject;
  const FileName: String;
  ExistingAttributes: Integer;
  Isolate: Boolean;
  const BackendFileName: String;
  DesiredAccess: Integer;
  Attributes: Integer;
  ShareMode: Integer;
  Options: Integer;
  CreateDisposition: Integer;
  SecurityDescriptor: Pointer;
  Length: Integer;
  var Status: Integer;
  var FileContext: Pointer;
  var HandleContext: Pointer;
  var ResultCode: Integer
) of Object;

property OnAfterCreateFile: TAfterCreateFileEvent read FOnAfterCreateFile write FOnAfterCreateFile;

Remarks

This event fires after the file or directory specified by FileName is created. Please refer to the File Create/Open Events topic for more information about how the component determines whether to fire this event or AfterOpenFile.

Applications need to handle this event only if they have added a standard filter rule that includes [the TBD]. FS_CE_AFTER_CREATE flag.

Note: Applications must have the FilterOwnRequests configuration setting enabled if they wish to filter their own file/directory creation requests.

Note: Not everything is possible or allowed in the event handlers. For details, see the Recursive Calls topic.

When extended rules are used or the AlwaysRequestAttributesOnOpen configuration setting is enabled, the driver requests attributes of the entity from the filesystem and passes them to ExistingAttributes. If the attributes are not requested, this parameter contains 0.

Isolation-related functionality is under construction.

The DesiredAccess, Attributes, ShareMode, and CreateDisposition parameters reflect the values that were passed for the similarly named parameters of the Windows API's CreateFile function (or, more accurately, the values carried by the IRP_MJ_CREATE IRP).

DesiredAccess may contain one or more of the following access flags:

Attributes may contain one or more of the following attributes:

ShareMode may contain zero or more of the following share mode flags:

CreateDisposition may contain one of the following values:

Options contains the flags that are described in the CreateOptions parameter of the native API's ZwCreateFile function. Most of those flags correspond to flags passed in the FlagsAndAttributes parameter of the Windows API's CreateFile function, but some flags are specific to the native API. If you need those flags, check both functions' descriptions.

Please refer to Microsoft's documentation for detailed information about these constants.

To determine whether the request was for a file or a directory, compare Attributes against the FILE_SYS_ATTR_DIRECTORY constant, as follows: // Check whether the request is for a file or a directory. bool isDirectory = Attributes & FILE_SYS_ATTR_DIRECTORY == FILE_SYS_ATTR_DIRECTORY; FILE_SYS_ATTR_DIRECTORY will be present if it was specified by the calling process or if the existing filesystem entry is a directory.

To determine whether a file will be deleted when its last handle is closed, compare Options against the Windows API's FILE_FLAG_DELETE_ON_CLOSE constant, as follows: // Check whether the file will be deleted on close. bool deleteOnClose = Options & FILE_FLAG_DELETE_ON_CLOSE == FILE_FLAG_DELETE_ON_CLOSE; Note: Because files can be deleted in different ways, do not use this check to take actions related to tracking file deletion operations. Instead, use the events related to file deletion.

When a file or directory is created using the CreateFile() Windows API function, a caller can specify the security descriptor with the security information. This security information should be applied to a newly created file or directory. The component passes this security information in the SecurityInformation and SecurityDescriptor parameters, when the PassSecurityInFileOpenEvents configuration setting is enabled. If this configuration setting is omitted, the corresponding parameters are empty.

The SecurityInformation parameter reflects which pieces of security information, of those present in SecurityDescriptor, are valid and should have been applied. Please refer to Microsoft's SECURITY_INFORMATION data type documentation for more information about possible values.

The SecurityDescriptor parameter points to a memory buffer that contains the security information. The Length parameter reflects the length of this data, in bytes. Please see the Buffer Parameters topic for more information on how to work with memory buffer event parameters.

The data are formatted as a SECURITY_DESCRIPTOR structure in self-relative format; please refer to the Microsoft's documentation for more information.

If the Options contains the FILE_FLAG_DELETE_ON_CLOSE flag, the AfterCanFileBeDeleted event will fire after this event.

If the file is created with Extended Attributes passed in the request, the AfterSetEa event will fire after this event.

The Status parameter contains an NT status code that indicates the outcome of the operation; 0 indicates success. To convert this value to a Win32 error code, call the NtStatusToWin32Error method.

Note: This event will not fire for failed requests unless the ProcessFailedRequests property is enabled. Applications may change this parameter's value if they want a different NT status code to be returned.

The FileContext and HandleContext parameters are placeholders for application-defined data associated with the file and specific handle, respectively. Please refer to the Contexts topic for more information.

When the ProcessFailedRequests property is enabled, this event may fire even if the specified file or directory has not been created or opened, in which case the Status parameter will be non-zero. When this occurs, applications must not alter the FileContext and HandleContext parameters.

The ResultCode parameter will always be 0 when the event is fired. If the event cannot be handled in a "successful" manner for some reason (e.g., a resource is not available or security checks failed), set it to a nonzero value to report an appropriate error. Please see the Error Reporting and Handling topic for more information.

This event is fired synchronously; please refer to the Event Types topic for more information.

AfterCreateHardLink Event (CBFilter Component)

This event fires after a hard link is created.

Syntax

type TAfterCreateHardLinkEvent = procedure (
  Sender: TObject;
  const FileName: String;
  const LinkName: String;
  var Status: Integer;
  var FileContext: Pointer;
  var HandleContext: Pointer;
  var ResultCode: Integer
) of Object;

property OnAfterCreateHardLink: TAfterCreateHardLinkEvent read FOnAfterCreateHardLink write FOnAfterCreateHardLink;

Remarks

This event fires after a hard link to the file specified by FileName is created. Please refer to Microsoft's Hard Links article for more information about hard links.

Applications need to handle this event only if they have added a standard filter rule that includes [the TBD]. FS_CE_AFTER_CREATE_HARD_LINK flag.

Note: Not everything is possible or allowed in the event handlers. For details, see the Recursive Calls topic.

The LinkName parameter reflects the name of the created hard link.

The Status parameter contains an NT status code that indicates the outcome of the operation; 0 indicates success. To convert this value to a Win32 error code, call the NtStatusToWin32Error method.

Note: This event will not fire for failed requests unless the ProcessFailedRequests property is enabled. Applications may change this parameter's value if they want a different NT status code to be returned.

The FileContext and HandleContext parameters are placeholders for application-defined data associated with the file and specific handle, respectively. Please refer to the Contexts topic for more information.

The ResultCode parameter will always be 0 when the event is fired. If the event cannot be handled in a "successful" manner for some reason (e.g., a resource is not available or security checks failed), set it to a nonzero value to report an appropriate error. Please see the Error Reporting and Handling topic for more information.

This event is fired synchronously; please refer to the Event Types topic for more information.

AfterDeleteFile Event (CBFilter Component)

This event fires after a file or directory is deleted.

Syntax

type TAfterDeleteFileEvent = procedure (
  Sender: TObject;
  const FileName: String;
  RequestType: Integer;
  var FileContext: Pointer;
  var HandleContext: Pointer;
  var ResultCode: Integer
) of Object;

property OnAfterDeleteFile: TAfterDeleteFileEvent read FOnAfterDeleteFile write FOnAfterDeleteFile;

Remarks

This event fires after the file or directory specified by FileName is deleted. More specifically, this event is fired after the final IRP_MJ_CLOSE IRP is processed by the filesystem (i.e., after the last handle to the file or directory is closed and the file or directory is gone) and before AfterCloseFile fires.

Applications need to handle this event only if they have added a standard filter rule that includes [the TBD]. FS_CE_AFTER_DELETE flag.

Note: Not everything is possible or allowed in the event handlers. For details, see the Recursive Calls topic.

The RequestType indicates which kind of system request resulted in firing this event. It can be one of the following:

The FileContext and HandleContext parameters are placeholders for application-defined data associated with the file and specific handle, respectively. Please refer to the Contexts topic for more information.

The ResultCode parameter will always be 0 when the event is fired. If the event cannot be handled in a "successful" manner for some reason (e.g., a resource is not available or security checks failed), set it to a nonzero value to report an appropriate error. Please see the Error Reporting and Handling topic for more information.

This event is fired synchronously; please refer to the Event Types topic for more information.

AfterDeleteReparsePoint Event (CBFilter Component)

This event fires after the OS deletes a reparse point from a file or directory.

Syntax

type TAfterDeleteReparsePointEvent = procedure (
  Sender: TObject;
  const FileName: String;
  ReparseBuffer: Pointer;
  BufferLength: Integer;
  var Status: Integer;
  var FileContext: Pointer;
  var HandleContext: Pointer;
  var ResultCode: Integer
) of Object;

property OnAfterDeleteReparsePoint: TAfterDeleteReparsePointEvent read FOnAfterDeleteReparsePoint write FOnAfterDeleteReparsePoint;

Remarks

This event fires after the OS deletes a reparse point from a file or directory specified by FileName.

Note: The file or directory is not deleted, only a reparse point is.

Applications need to handle this event only if they have added a standard filter rule that includes [the TBD]. FS_CE_AFTER_DELETE_REPARSE_POINT flag.

Note: Not everything is possible or allowed in the event handlers. For details, see the Recursive Calls topic.

The ReparseBuffer parameter points to a memory buffer that specifies the known reparse point information. This information is provided for convenience. Please see the Buffer Parameters topic for more information on how to work with memory buffer event parameters.

Please refer to the Reparse Points topic for more information.

The Status parameter contains an NT status code that indicates the outcome of the operation; 0 indicates success. To convert this value to a Win32 error code, call the NtStatusToWin32Error method.

Note: This event will not fire for failed requests unless the ProcessFailedRequests property is enabled. Applications may change this parameter's value if they want a different NT status code to be returned.

The FileContext and HandleContext parameters are placeholders for application-defined data associated with the file and specific handle, respectively. Please refer to the Contexts topic for more information.

The ResultCode parameter will always be 0 when the event is fired. If the event cannot be handled in a "successful" manner for some reason (e.g., a resource is not available or security checks failed), set it to a nonzero value to report an appropriate error. Please see the Error Reporting and Handling topic for more information.

This event is fired synchronously; please refer to the Event Types topic for more information.

AfterEnumerateDirectory Event (CBFilter Component)

This event fires after a directory entry is returned during directory enumeration.

Syntax

type TAfterEnumerateDirectoryEvent = procedure (
  Sender: TObject;
  const DirectoryName: String;
  Flags: Integer;
  Index: Integer;
  var FileName: String;
  var CreationTime: TDateTime;
  var LastAccessTime: TDateTime;
  var LastWriteTime: TDateTime;
  var ChangeTime: TDateTime;
  var Size: Int64;
  var AllocationSize: Int64;
  var FileId: Int64;
  var Attributes: Integer;
  var Status: Integer;
  var DirectoryContext: Pointer;
  var HandleContext: Pointer;
  var EnumerationContext: Pointer;
  var ProcessRequest: Boolean;
  var ResultCode: Integer
) of Object;

property OnAfterEnumerateDirectory: TAfterEnumerateDirectoryEvent read FOnAfterEnumerateDirectory write FOnAfterEnumerateDirectory;

Remarks

This event fires after a directory entry (i.e., a file or subdirectory) is returned during enumeration of the directory specified by DirectoryName.

Applications may use this event to modify the entry's metadata before it gets reported to the requestor or even to prevent the entry from being reported in the first place.

Applications need to handle this event only if they have added a standard filter rule that includes [the TBD]. FS_CE_AFTER_ENUMERATE_DIRECTORY flag.

Note: Not everything is possible or allowed in the event handlers. For details, see the Recursive Calls topic.

The Flags parameter specifies supplementary information about enumeration. It is a combination of zero or more values:

If the Flags parameter contains FS_ENUM_INDEX_SPECIFIED, the Index parameter contains the index as provided by the OS.

The FileName parameter reflects the name of the directory entry. .

The CreationTime, LastAccessTime, LastWriteTime, and ChangeTime parameters specify the entry's time values, specified in UTC.

The Size parameter specifies the size of the file, in bytes; it must always be 0 for subdirectories.

The AllocationSize parameter specifies the amount of space allocated for the file, in bytes; it must always be 0 for subdirectories.

The FileId parameter specifies the unique Id of the entry, as reported by the filesystem (or, for virtual files, by the application itself). This Id is used by the network redirector, and some third-party applications, to open files and directories by Id instead of by name. The root directory always uses the predefined Id 0x7FFFFFFFFFFFFFFF.

The Attributes parameter specifies the entry's attributes; please refer to Microsoft's File Attribute Constants article for attribute descriptions.

The Status parameter contains an NT status code that indicates the outcome of the operation; 0 indicates success. To convert this value to a Win32 error code, call the NtStatusToWin32Error method.

Note: This event will not fire for failed requests unless the ProcessFailedRequests property is enabled. Applications may change this parameter's value if they want a different NT status code to be returned.

The DirectoryContext, HandleContext, and EnumerationContext parameters are placeholders for application-defined data associated with the directory, specific handle, and enumeration, respectively. (For general-purpose events, the DirectoryContext is called FileContext instead.) DirectoryContext corresponds to the FileContext in the file/directory creation, opening, and closing events. Please refer to the Contexts topic for more information.

The ProcessRequest parameter controls whether the directory entry should actually be reported to the requestor; it is True by default. Setting this parameter to False will "hide" the directory entry (i.e., prevent it from being reported).

The ResultCode parameter will always be 0 when the event is fired. If the event cannot be handled in a "successful" manner for some reason (e.g., a resource is not available or security checks failed), set it to a nonzero value to report an appropriate error. Please see the Error Reporting and Handling topic for more information.

This event is fired synchronously; please refer to the Event Types topic for more information.

AfterFilterAttachToVolume Event (CBFilter Component)

This event fires after the filter attaches to a newly mounted filesystem volume.

Syntax

type TAfterFilterAttachToVolumeEvent = procedure (
  Sender: TObject;
  const VolumeName: String;
  var ResultCode: Integer
) of Object;

property OnAfterFilterAttachToVolume: TAfterFilterAttachToVolumeEvent read FOnAfterFilterAttachToVolume write FOnAfterFilterAttachToVolume;

Remarks

This event fires after the filter attaches to the newly mounted filesystem volume specified by VolumeName. Please refer to the FireVolumeEvents property for more information.

Applications need to handle this event only if the FireVolumeEvents property includes the FS_MOUNT_CONTROL flag.

Note: This event won't fire for any volumes skipped during the BeforeFilterAttachToVolume event; please refer to its documentation for more information.

Applications can use this event to add volume-specific rules for the volume that has been mounted (keeping in mind that this event does not fire for volumes that are already present when StartFilter is called). Applications that intend to do so must ensure that proper thread synchronization techniques are used when manipulating or enumerating the rule lists, because this event's handler will always execute in the context of some worker thread.

Applications must be aware that this event fires as a direct response to a filesystem state change (mount or unmount). Various system components or third-party actors can perform supplementary filesystem mounting and unmounting during main unmount operations (e.g., Volume Service is one such component). This can cause seemingly excessive events to be fired, and sometimes they can be fired out of order (such as two *Attach or *Detach events fired in a row).

The format of the VolumeName parameter's value depends on whether the ResolveNtDeviceToDriveLetter configuration setting is enabled; please refer to its documentation for more information. Applications can obtain additional information about a volume by retrieving its GUID using the GetVolumeGUID method, and then using that GUID to call various Windows API functions.

The ResultCode parameter will always be 0 when the event is fired. If the event cannot be handled in a "successful" manner for some reason (e.g., a resource is not available or security checks failed), set it to a nonzero value to report an appropriate error. Please see the Error Reporting and Handling topic for more information.

This event is fired synchronously; please refer to the Event Types topic for more information.

AfterFilterDetachFromVolume Event (CBFilter Component)

This event fires after the filter detaches from a filesystem volume.

Syntax

type TAfterFilterDetachFromVolumeEvent = procedure (
  Sender: TObject;
  const VolumeName: String;
  var ResultCode: Integer
) of Object;

property OnAfterFilterDetachFromVolume: TAfterFilterDetachFromVolumeEvent read FOnAfterFilterDetachFromVolume write FOnAfterFilterDetachFromVolume;

Remarks

This event fires after the filter detaches from the filesystem volume specified by VolumeName, typically because of the volume being unmounted. Please refer to the FireVolumeEvents property for more information.

Applications need to handle this event only if the FireVolumeEvents property includes the FS_MOUNT_CONTROL flag.

Note: This event won't fire for any volumes skipped during the BeforeFilterAttachToVolume event; please refer to its documentation for more information.

Applications should use this event to remove volume-specific rules for the volume that has been unmounted. Applications that intend to do so must ensure that proper thread synchronization techniques are used when manipulating or enumerating the rule lists, because this event's handler will always execute in the context of some worker thread.

Applications must be aware that this event fires as a direct response to a filesystem state change (mount or unmount). Various system components or third-party actors can perform supplementary filesystem mounting and unmounting during main unmount operations (e.g., Volume Service is one such component). This can cause seemingly excessive events to be fired, and sometimes they can be fired out of order (such as two *Attach or *Detach events fired in a row).

The format of the VolumeName parameter's value depends on whether the ResolveNtDeviceToDriveLetter configuration setting is enabled; please refer to its documentation for more information. Applications can obtain additional information about a volume by retrieving its GUID using the GetVolumeGUID method, and then using that GUID to call various Windows API functions.

The ResultCode parameter will always be 0 when the event is fired. If the event cannot be handled in a "successful" manner for some reason (e.g., a resource is not available or security checks failed), set it to a nonzero value to report an appropriate error. Please see the Error Reporting and Handling topic for more information.

This event is fired synchronously; please refer to the Event Types topic for more information.

AfterFsctl Event (CBFilter Component)

This event fires after an IRP_MJ_FILE_SYSTEM_CONTROL request is processed.

Syntax

type TAfterFsctlEvent = procedure (
  Sender: TObject;
  const FileName: String;
  FsControlCode: Integer;
  InBuffer: Pointer;
  InBufferLength: Integer;
  InBufferValidBytes: Integer;
  OutBuffer: Pointer;
  OutBufferLength: Integer;
  var OutBufferValidBytes: Integer;
  var Status: Integer;
  var FileContext: Pointer;
  var HandleContext: Pointer;
  var ResultCode: Integer
) of Object;

property OnAfterFsctl: TAfterFsctlEvent read FOnAfterFsctl write FOnAfterFsctl;

Remarks

This event fires after an IRP_MJ_FILE_SYSTEM_CONTROL (FSCTL) request is processed. Such requests are sent using the Windows API's DeviceIoControl function (user mode), or ZwFsControlFile function (kernel mode); please refer to Microsoft's documentation for more information.

Applications may use this event to modify the output data (if there are any) before the response is returned to the requestor. Applications that choose to do this must:

1. copy no more than OutBufferLength bytes into OutBuffer; and
2. update the OutBufferValidBytes parameter's value afterward so that it correctly reflects the amount of data in OutBuffer.

Applications need to handle this event only if they have added a standard filter rule that includes [the TBD]. FS_CE_AFTER_FSCTL flag.

Note: Not everything is possible or allowed in the event handlers. For details, see the Recursive Calls topic.

The FileName parameter reflects the file, directory, or volume targeted by the request.

The FsControlCode parameter reflects the requested filesystem control code (FSCTL).

The InBuffer parameter points to a memory buffer that contains the data required to perform the operation. The InBufferLength and InBufferValidBytes parameters reflect the capacity of InBuffer and the length of the data it contains (respectively), in bytes; InBufferValidBytes may be less than InBufferLength (unless the request did not include data, in which case both will be 0).

The OutBuffer parameter points to a memory buffer that contains the data returned by the operation. The OutBufferLength and OutBufferValidBytes parameters reflect the capacity of OutBuffer and the length of the data it contains (respectively), in bytes; OutBufferValidBytes may be less than OutBufferLength (unless the operation did not return data, in which case both will be 0).

Please see the Buffer Parameters topic for more information on how to work with memory buffer event parameters.

The Status parameter contains an NT status code that indicates the outcome of the operation; 0 indicates success. To convert this value to a Win32 error code, call the NtStatusToWin32Error method.

Note: This event will not fire for failed requests unless the ProcessFailedRequests property is enabled. Applications may change this parameter's value if they want a different NT status code to be returned.

The FileContext and HandleContext parameters are placeholders for application-defined data associated with the file and specific handle, respectively. Please refer to the Contexts topic for more information.

The ResultCode parameter will always be 0 when the event is fired. If the event cannot be handled in a "successful" manner for some reason (e.g., a resource is not available or security checks failed), set it to a nonzero value to report an appropriate error. Please see the Error Reporting and Handling topic for more information.

This event is fired synchronously; please refer to the Event Types topic for more information.

AfterGetFileSecurity Event (CBFilter Component)

This event fires after a file or directory's security attributes are retrieved.

Syntax

type TAfterGetFileSecurityEvent = procedure (
  Sender: TObject;
  const FileName: String;
  SecurityInformation: Integer;
  SecurityDescriptor: Pointer;
  Length: Integer;
  var LengthNeeded: Integer;
  var Status: Integer;
  var FileContext: Pointer;
  var HandleContext: Pointer;
  var ResultCode: Integer
) of Object;

property OnAfterGetFileSecurity: TAfterGetFileSecurityEvent read FOnAfterGetFileSecurity write FOnAfterGetFileSecurity;

Remarks

This event fires after security attributes are retrieved for the file or directory specified by FileName.

Note: This event will not fire every time a file or directory is accessed. To check file security upon each access to a file or directory, implement the file create and open events and perform the necessary checks there instead.

Applications need to handle this event only if they have added a standard filter rule that includes [the TBD]. FS_CE_AFTER_GET_SECURITY flag.

Note: Not everything is possible or allowed in the event handlers. For details, see the Recursive Calls topic.

The SecurityInformation parameter indicates which pieces of security information were requested. Please refer to Microsoft's SECURITY_INFORMATION data-type documentation for more information about possible values.

The SecurityDescriptor parameter points to a memory buffer that, if the request was successful, contains the requested security information. The Length parameter reflects the length of this data, in bytes. Please see the Buffer Parameters topic for more information on how to work with memory buffer event parameters.

The data are formatted as a SECURITY_DESCRIPTOR structure in self-relative format; please refer to the Microsoft's documentation for more information.

Applications that wish to modify the security information may do so by replacing the data in the SecurityDescriptor buffer. If the current Length is too small to accommodate the new security information, set LengthNeeded to the number of bytes necessary to hold the data and return the ERROR_INSUFFICIENT_BUFFER error code via ResultCode.

The Status parameter contains an NT status code that indicates the outcome of the operation; 0 indicates success. To convert this value to a Win32 error code, call the NtStatusToWin32Error method.

Note: This event will not fire for failed requests unless the ProcessFailedRequests property is enabled. Applications may change this parameter's value if they want a different NT status code to be returned.

The FileContext and HandleContext parameters are placeholders for application-defined data associated with the file and specific handle, respectively. Please refer to the Contexts topic for more information.

The ResultCode parameter will always be 0 when the event is fired. If the event cannot be handled in a "successful" manner for some reason (e.g., a resource is not available or security checks failed), set it to a nonzero value to report an appropriate error. Please see the Error Reporting and Handling topic for more information.

This event is fired synchronously; please refer to the Event Types topic for more information.

AfterGetFileSizes Event (CBFilter Component)

This event fires after a file's size information is retrieved.

Syntax

type TAfterGetFileSizesEvent = procedure (
  Sender: TObject;
  const FileName: String;
  var Size: Int64;
  var AllocationSize: Int64;
  var Status: Integer;
  var FileContext: Pointer;
  var HandleContext: Pointer;
  var ResultCode: Integer
) of Object;

property OnAfterGetFileSizes: TAfterGetFileSizesEvent read FOnAfterGetFileSizes write FOnAfterGetFileSizes;

Remarks

This event fires after size information is retrieved for the file specified by FileName.

Applications that intend to modify a file's contents should use this event to modify the file's actual size or allocation size as necessary. Applications that make use of virtual files should use this event to report the size of the virtual files.

Applications need to handle this event only if they have added a standard filter rule that includes [the TBD]. FS_CE_AFTER_GET_SIZES flag.

Note: Not everything is possible or allowed in the event handlers. For details, see the Recursive Calls topic.

The Size parameter specifies the actual size of the file, in bytes.

The AllocationSize parameter specifies the amount of space allocated for the file, in bytes.

The Status parameter contains an NT status code that indicates the outcome of the operation; 0 indicates success. To convert this value to a Win32 error code, call the NtStatusToWin32Error method.

Note: This event will not fire for failed requests unless the ProcessFailedRequests property is enabled. Applications may change this parameter's value if they want a different NT status code to be returned.

The FileContext and HandleContext parameters are placeholders for application-defined data associated with the file and specific handle, respectively. Please refer to the Contexts topic for more information.

The ResultCode parameter will always be 0 when the event is fired. If the event cannot be handled in a "successful" manner for some reason (e.g., a resource is not available or security checks failed), set it to a nonzero value to report an appropriate error. Please see the Error Reporting and Handling topic for more information.

This event is fired synchronously; please refer to the Event Types topic for more information.

AfterGetReparsePoint Event (CBFilter Component)

This event fires after a file or directory's reparse point information is retrieved.

Syntax

type TAfterGetReparsePointEvent = procedure (
  Sender: TObject;
  const FileName: String;
  ReparseBuffer: Pointer;
  BufferLength: Integer;
  var DataLength: Integer;
  var LengthNeeded: Integer;
  var Status: Integer;
  var FileContext: Pointer;
  var HandleContext: Pointer;
  var ResultCode: Integer
) of Object;

property OnAfterGetReparsePoint: TAfterGetReparsePointEvent read FOnAfterGetReparsePoint write FOnAfterGetReparsePoint;

Remarks

This event fires after reparse point information is retrieved for the file or directory specified by FileName.

Applications need to handle this event only if they have added a standard filter rule that includes [the TBD]. FS_CE_AFTER_GET_REPARSE_POINT flag.

Note: Not everything is possible or allowed in the event handlers. For details, see the Recursive Calls topic.

The ReparseBuffer parameter points to a memory buffer that, if the request was successful, contains the requested reparse point information. The DataLength parameter reflects the length of this data, in bytes. Please see the Buffer Parameters topic for more information on how to work with memory buffer event parameters.

Please refer to the Reparse Points topic for more information.

Applications that wish to modify the reparse point information may do so by replacing the data in the ReparseBuffer buffer. If the current BufferLength is too small to accommodate the new information, the application should write as much data as possible, set LengthNeeded appropriately, and return the STATUS_BUFFER_OVERFLOW status code via Status.

The Status parameter contains an NT status code that indicates the outcome of the operation; 0 indicates success. To convert this value to a Win32 error code, call the NtStatusToWin32Error method.

Note: This event will not fire for failed requests unless the ProcessFailedRequests property is enabled. Applications may change this parameter's value if they want a different NT status code to be returned.

The FileContext and HandleContext parameters are placeholders for application-defined data associated with the file and specific handle, respectively. Please refer to the Contexts topic for more information.

Depending on how the request originator accessed the specified file or directory, it may or may not currently be open. The FileContext and HandleContext parameters will be absent if it is not open, in which case they will be nil.

The ResultCode parameter will always be 0 when the event is fired. If the event cannot be handled in a "successful" manner for some reason (e.g., a resource is not available or security checks failed), set it to a nonzero value to report an appropriate error. Please see the Error Reporting and Handling topic for more information.

This event is fired synchronously; please refer to the Event Types topic for more information.

AfterIoctl Event (CBFilter Component)

This event fires after an IRP_MJ_DEVICE_CONTROL request is processed.

Syntax

type TAfterIoctlEvent = procedure (
  Sender: TObject;
  const FileName: String;
  IoControlCode: Integer;
  InBuffer: Pointer;
  InBufferLength: Integer;
  InBufferValidBytes: Integer;
  OutBuffer: Pointer;
  OutBufferLength: Integer;
  var OutBufferValidBytes: Integer;
  var Status: Integer;
  var FileContext: Pointer;
  var HandleContext: Pointer;
  var ResultCode: Integer
) of Object;

property OnAfterIoctl: TAfterIoctlEvent read FOnAfterIoctl write FOnAfterIoctl;

Remarks

This event fires after an IRP_MJ_DEVICE_CONTROL (IOCTL) request is processed. Such requests are sent using the Windows API's DeviceIoControl function (user mode), or ZwDeviceIoControlFile function (kernel mode). Please refer to Microsoft's documentation for more information.

Applications may use this event to modify the output data (if there are any) before the response is returned to the requestor. Applications that choose to do this must:

1. copy no more than OutBufferLength bytes into OutBuffer; and
2. update the OutBufferValidBytes parameter's value afterward so that it correctly reflects the amount of data in OutBuffer.

Applications need to handle this event only if they have added a standard filter rule that includes [the TBD]. FS_CE_AFTER_IOCTL flag.

Note: Not everything is possible or allowed in the event handlers. For details, see the Recursive Calls topic.

The FileName parameter reflects the file, directory, or volume targeted by the request.

The IoControlCode parameter reflects the requested I/O control code (IOCTL).

The InBuffer parameter points to a memory buffer that contains the data required to perform the operation. The InBufferLength and InBufferValidBytes parameters reflect the capacity of InBuffer and the length of the data it contains (respectively), in bytes; InBufferValidBytes may be less than InBufferLength (unless the request did not include data, in which case both will be 0).

The OutBuffer parameter points to a memory buffer that contains the data returned by the operation. The OutBufferLength and OutBufferValidBytes parameters reflect the capacity of OutBuffer and the length of the data it contains (respectively), in bytes; OutBufferValidBytes may be less than OutBufferLength (unless the operation did not return data, in which case both will be 0).

Please see the Buffer Parameters topic for more information on how to work with memory buffer event parameters.

The Status parameter contains an NT status code that indicates the outcome of the operation; 0 indicates success. To convert this value to a Win32 error code, call the NtStatusToWin32Error method.

Note: This event will not fire for failed requests unless the ProcessFailedRequests property is enabled. Applications may change this parameter's value if they want a different NT status code to be returned.

The FileContext and HandleContext parameters are placeholders for application-defined data associated with the file and specific handle, respectively. Please refer to the Contexts topic for more information.

The ResultCode parameter will always be 0 when the event is fired. If the event cannot be handled in a "successful" manner for some reason (e.g., a resource is not available or security checks failed), set it to a nonzero value to report an appropriate error. Please see the Error Reporting and Handling topic for more information.

This event is fired synchronously; please refer to the Event Types topic for more information.

AfterLock Event (CBFilter Component)

This event fires after a range of bytes in a file is locked.

Syntax

type TAfterLockEvent = procedure (
  Sender: TObject;
  const FileName: String;
  Offset: Int64;
  Length: Int64;
  Key: Int64;
  FailImmediately: Boolean;
  ExclusiveLock: Boolean;
  var Status: Integer;
  var FileContext: Pointer;
  var HandleContext: Pointer;
  var ResultCode: Integer
) of Object;

property OnAfterLock: TAfterLockEvent read FOnAfterLock write FOnAfterLock;

Remarks

This event fires after a range of bytes in the file specified by FileName is locked; This request is made either by the OS, or on behalf of a user mode application that called the Windows API's LockFile or LockFileEx function.

Applications need to handle this event only if they have added a standard filter rule that includes [the TBD]. FS_CE_AFTER_LOCK_CONTROL flag.

Note: Not everything is possible or allowed in the event handlers. For details, see the Recursive Calls topic.

The Offset parameter reflects the byte offset where the byte range lock starts.

The Length parameter reflects the length of the byte range lock.

The Key parameter reflects the key that the byte range lock is associated with. This key is used to identify the byte range lock in later unlock-by-key requests.

The FailImmediately parameter indicates whether the request was to fail if the lock could not be granted immediately.

The ExclusiveLock parameter indicates whether the byte range lock was to be exclusive (True) or shared (False).

The Status parameter contains an NT status code that indicates the outcome of the operation; 0 indicates success. To convert this value to a Win32 error code, call the NtStatusToWin32Error method.

Note: This event will not fire for failed requests unless the ProcessFailedRequests property is enabled. Applications may change this parameter's value if they want a different NT status code to be returned.

The FileContext and HandleContext parameters are placeholders for application-defined data associated with the file and specific handle, respectively. Please refer to the Contexts topic for more information.

The ResultCode parameter will always be 0 when the event is fired. If the event cannot be handled in a "successful" manner for some reason (e.g., a resource is not available or security checks failed), set it to a nonzero value to report an appropriate error. Please see the Error Reporting and Handling topic for more information.

This event is fired synchronously; please refer to the Event Types topic for more information.

AfterOpenFile Event (CBFilter Component)

This event fires after a file or directory is opened.

Syntax

type TAfterOpenFileEvent = procedure (
  Sender: TObject;
  const FileName: String;
  ExistingAttributes: Integer;
  Isolate: Boolean;
  const BackendFileName: String;
  DesiredAccess: Integer;
  Attributes: Integer;
  ShareMode: Integer;
  Options: Integer;
  CreateDisposition: Integer;
  SecurityDescriptor: Pointer;
  Length: Integer;
  var Status: Integer;
  var FileContext: Pointer;
  var HandleContext: Pointer;
  var ResultCode: Integer
) of Object;

property OnAfterOpenFile: TAfterOpenFileEvent read FOnAfterOpenFile write FOnAfterOpenFile;

Remarks

This event fires after the file or directory specified by FileName is opened. Please refer to the File Create/Open Events topic for more information about how the component determines whether to fire this event or AfterCreateFile.

Applications need to handle this event only if they have added a standard filter rule that includes [the TBD]. FS_CE_AFTER_OPEN flag.

Note: Applications must have the FilterOwnRequests configuration setting enabled if they wish to filter their own file/directory open requests.

Note: Not everything is possible or allowed in the event handlers. For details, see the Recursive Calls topic.

When extended rules are used or the AlwaysRequestAttributesOnOpen configuration setting is enabled, the driver requests attributes of the entity from the filesystem and passes them to ExistingAttributes. If the attributes are not requested, this parameter contains 0.

Isolation-related functionality is under construction.

The DesiredAccess, Attributes, ShareMode, and CreateDisposition parameters reflect the values that were passed for the similarly named parameters of the Windows API's CreateFile function (or, more accurately, the values carried by the IRP_MJ_CREATE IRP).

DesiredAccess may contain one or more of the following access flags:

Attributes may contain one or more of the following attributes:

ShareMode may contain zero or more of the following share mode flags:

CreateDisposition may contain one of the following values:

Options contains the flags that are described in the CreateOptions parameter of the native API's ZwCreateFile function. Most of those flags correspond to flags passed in the FlagsAndAttributes parameter of the Windows API's CreateFile function, but some flags are specific to the native API. If you need those flags, check both functions' descriptions.

Please refer to Microsoft's documentation for detailed information about these constants.

To determine whether the request was for a file or a directory, compare Attributes against the FILE_SYS_ATTR_DIRECTORY constant, as follows: // Check whether the request is for a file or a directory. bool isDirectory = Attributes & FILE_SYS_ATTR_DIRECTORY == FILE_SYS_ATTR_DIRECTORY; FILE_SYS_ATTR_DIRECTORY will be present if it was specified by the calling process or if the existing filesystem entry is a directory.

To determine whether a file will be deleted when its last handle is closed, compare Options against the Windows API's FILE_FLAG_DELETE_ON_CLOSE constant, as follows: // Check whether the file will be deleted on close. bool deleteOnClose = Options & FILE_FLAG_DELETE_ON_CLOSE == FILE_FLAG_DELETE_ON_CLOSE; Note: Because files can be deleted in different ways, do not use this check to take actions related to tracking file deletion operations. Instead, use the events related to file deletion.

When a file or directory is created using the CreateFile() Windows API function, a caller can specify the security descriptor with the security information. This security information should be applied to a newly created file or directory. The component passes this security information in the SecurityInformation and SecurityDescriptor parameters, when the PassSecurityInFileOpenEvents configuration setting is enabled. If this configuration setting is omitted, the corresponding parameters are empty.

The SecurityInformation parameter reflects which pieces of security information, of those present in SecurityDescriptor, are valid and should have been applied. Please refer to Microsoft's SECURITY_INFORMATION data type documentation for more information about possible values.

The SecurityDescriptor parameter points to a memory buffer that contains the security information. The Length parameter reflects the length of this data, in bytes. Please see the Buffer Parameters topic for more information on how to work with memory buffer event parameters.

The data are formatted as a SECURITY_DESCRIPTOR structure in self-relative format; please refer to the Microsoft's documentation for more information.

If the Options contains the FILE_FLAG_DELETE_ON_CLOSE flag, the AfterCanFileBeDeleted event will fire after this event.

If the file is opened with extended attributes passed in the request, the AfterSetEa event will fire after this event.

The Status parameter contains an NT status code that indicates the outcome of the operation; 0 indicates success. To convert this value to a Win32 error code, call the NtStatusToWin32Error method.

Note: This event will not fire for failed requests unless the ProcessFailedRequests property is enabled. Applications may change this parameter's value if they want a different NT status code to be returned.

The FileContext and HandleContext parameters are placeholders for application-defined data associated with the file and specific handle, respectively. Please refer to the Contexts topic for more information.

When the ProcessFailedRequests property is enabled, this event may fire even if the specified file or directory has not been created or opened, in which case the Status parameter will be non-zero. When this occurs, applications must not alter the FileContext and HandleContext parameters.

The ResultCode parameter will always be 0 when the event is fired. If the event cannot be handled in a "successful" manner for some reason (e.g., a resource is not available or security checks failed), set it to a nonzero value to report an appropriate error. Please see the Error Reporting and Handling topic for more information.

This event is fired synchronously; please refer to the Event Types topic for more information.

AfterQueryEa Event (CBFilter Component)

This event fires after information about extended attributes of a file is retrieved.

Syntax

type TAfterQueryEaEvent = procedure (
  Sender: TObject;
  const FileName: String;
  Buffer: Pointer;
  BufferLength: Integer;
  ReturnSingleEntry: Boolean;
  EaList: Pointer;
  EaListLength: Integer;
  EaIndex: Integer;
  RestartScan: Boolean;
  var LengthReturned: Integer;
  var Status: Integer;
  var FileContext: Pointer;
  var HandleContext: Pointer;
  var ResultCode: Integer
) of Object;

property OnAfterQueryEa: TAfterQueryEaEvent read FOnAfterQueryEa write FOnAfterQueryEa;

Remarks

This event fires after information about extended attributes of the file specified by FileName is retrieved using the FltQueryEaFile function of the system API.

Applications need to handle this event only if they have added a standard filter rule that includes [the TBD]. FS_CE_AFTER_QUERY_EA flag.

Note: Not everything is possible or allowed in the event handlers. For details, see the Recursive Calls topic.

The Buffer parameter points to a memory buffer that, if the request was successful, contains the requested information. The data in the buffer are formatted as a FILE_FULL_EA_INFORMATION structure; please refer to the Microsoft's documentation for more information. The Length parameter reflects the length of this buffer, in bytes. Please see the Buffer Parameters topic for more information on how to work with memory buffer event parameters.

ReturnSingleEntry specifies that the filesystem had to return only the first entry it has found.

EaList is an optional parameter that points to a caller-supplied memory buffer specifying the extended attributes to be queried. The data in the buffer are formatted as a FILE_GET_EA_INFORMATION structure; please refer to the Microsoft's documentation for more information. The EaListLength parameter reflects the length of this data, in bytes. If the caller of the FltQueryEaFile function did not specify any value, it will contain 0.

EaIndex is an optional parameter that specifies the starting index of the attribute, information about which was requested. This parameter is ignored by the filesystem if EaList points to a nonempty list. If the caller of the FltQueryEaFile function did not specify any value, the parameter will contain -1.

The RestartScan parameter instructs the filesystem to restart enumeration of extended attributes from the first entry. If the parameter is False, retrieval of the extended attributes is resumed by the filesystem after a previous request.

LengthReturned is an optional parameter that contains the size, in bytes, of the information, returned in the Buffer.

A handler may modify the contents of the Buffer given that the size of the modified data does not exceed the length of the buffer. When modifying the data, a handler should update LengthReturned accordingly.

The Status parameter contains an NT status code that indicates the outcome of the operation; 0 indicates success. To convert this value to a Win32 error code, call the NtStatusToWin32Error method.

Note: This event will not fire for failed requests unless the ProcessFailedRequests property is enabled. Applications may change this parameter's value if they want a different NT status code to be returned.

The FileContext and HandleContext parameters are placeholders for application-defined data associated with the file and specific handle, respectively. Please refer to the Contexts topic for more information.

The ResultCode parameter will always be 0 when the event is fired. If the event cannot be handled in a "successful" manner for some reason (e.g., a resource is not available or security checks failed), set it to a nonzero value to report an appropriate error. Please see the Error Reporting and Handling topic for more information.

This event is fired synchronously; please refer to the Event Types topic for more information.

AfterQueryFileInfo Event (CBFilter Component)

This event fires after information about a file or directory is retrieved.

Syntax

type TAfterQueryFileInfoEvent = procedure (
  Sender: TObject;
  const FileName: String;
  FileInformationClass: Integer;
  Buffer: Pointer;
  BufferLength: Integer;
  var ValidBytes: Integer;
  var Status: Integer;
  var FileContext: Pointer;
  var HandleContext: Pointer;
  var ResultCode: Integer
) of Object;

property OnAfterQueryFileInfo: TAfterQueryFileInfoEvent read FOnAfterQueryFileInfo write FOnAfterQueryFileInfo;

Remarks

This event fires after information about the file or directory specified by FileName is retrieved; This event typically fires in response to the Windows API's NtQueryInformationFile function.

Applications may use this event to modify the output data before the response is returned to the requestor. Applications that choose to do this must:

1. copy no more than BufferLength bytes into Buffer; and
2. update the ValidBytes parameter's value afterward so that it correctly reflects the amount of data in Buffer.

Applications need to handle this event only if they have added a standard filter rule that includes [the TBD]. FS_CE_AFTER_QUERY_FILE_INFO flag.

Note: Not everything is possible or allowed in the event handlers. For details, see the Recursive Calls topic.

The FileInformationClass parameter indicates what kind of file information was requested. Please refer to the NtQueryInformationFile function's documentation for more information about possible values.

The Buffer parameter points to a memory buffer that, if the request was successful, contains the requested file information. The BufferLength and ValidBytes parameters reflect the capacity of Buffer and the length of the data it contains (respectively), in bytes; ValidBytes may be less than BufferLength. Please see the Buffer Parameters topic for more information on how to work with memory buffer event parameters.

The format of the data is determined by the specified FileInformationClass; please refer to the NtQueryInformationFile function's documentation for more information.

The Status parameter contains an NT status code that indicates the outcome of the operation; 0 indicates success. To convert this value to a Win32 error code, call the NtStatusToWin32Error method.

Note: This event will not fire for failed requests unless the ProcessFailedRequests property is enabled. Applications may change this parameter's value if they want a different NT status code to be returned.

The FileContext and HandleContext parameters are placeholders for application-defined data associated with the file and specific handle, respectively. Please refer to the Contexts topic for more information.

The ResultCode parameter will always be 0 when the event is fired. If the event cannot be handled in a "successful" manner for some reason (e.g., a resource is not available or security checks failed), set it to a nonzero value to report an appropriate error. Please see the Error Reporting and Handling topic for more information.

This event is fired synchronously; please refer to the Event Types topic for more information.

AfterReadFile Event (CBFilter Component)

This event fires after data are read from a file.

Syntax

type TAfterReadFileEvent = procedure (
  Sender: TObject;
  const FileName: String;
  Position: Int64;
  Buffer: Pointer;
  BufferLength: Integer;
  BytesToRead: Integer;
  Reserved: Integer;
  Direction: Integer;
  var BytesRead: Integer;
  var Status: Integer;
  var FileContext: Pointer;
  var HandleContext: Pointer;
  var ResultCode: Integer
) of Object;

property OnAfterReadFile: TAfterReadFileEvent read FOnAfterReadFile write FOnAfterReadFile;

Remarks

This event fires after data are read from the file specified by FileName.

Applications may use this event to modify the data that were read from the file before it is returned to the requestor. Applications that choose to do this must:

1. enable the ModifiableReadWriteBuffers configuration setting (i.e., before this event fires);
2. copy no more than BytesToRead bytes into Buffer; and
3. update the BytesRead parameter's value afterward so that it correctly reflects the amount of data in Buffer.

Applications need to handle this event only if they have added a standard filter rule that includes [the TBD]. FS_CE_AFTER_READ flag.

Note: Not everything is possible or allowed in the event handlers. For details, see the Recursive Calls topic.

The Position parameter reflects the byte offset in the file at which reading started.

The Buffer parameter points to a memory buffer that, if the request was successful, contains the data that were read from the file. The BufferLength parameter reflects the capacity of Buffer, in bytes. Please see the Buffer Parameters topic for more information on how to work with memory buffer event parameters.

The BytesToRead parameter reflects how many bytes were to be read from the file (i.e., how many bytes the requestor expects will be read).

The Direction parameter indicates the request direction; please refer to the Cached and Non-Cached Requests topic for more information. Possible values are as follows:

The BytesRead parameter specifies how many bytes were actually read from the file, and thus the length of the data in Buffer. This parameter's value must not exceed BufferLength (and should not exceed BytesToRead; please refer to BeforeReadFile for more information).

The Status parameter contains an NT status code that indicates the outcome of the operation; 0 indicates success. To convert this value to a Win32 error code, call the NtStatusToWin32Error method.

Note: This event will not fire for failed requests unless the ProcessFailedRequests property is enabled. Applications may change this parameter's value if they want a different NT status code to be returned.

The FileContext and HandleContext parameters are placeholders for application-defined data associated with the file and specific handle, respectively. Please refer to the Contexts topic for more information. (If the system's cache manager or memory manager initiated the operation, HandleContext may be absent, in which case it will be nil.)

The ResultCode parameter will always be 0 when the event is fired. If the event cannot be handled in a "successful" manner for some reason (e.g., a resource is not available or security checks failed), set it to a nonzero value to report an appropriate error. Please see the Error Reporting and Handling topic for more information.

This event is fired synchronously; please refer to the Event Types topic for more information.

AfterRenameOrMoveFile Event (CBFilter Component)

This event fires after a file or directory is renamed or moved.

Syntax

type TAfterRenameOrMoveFileEvent = procedure (
  Sender: TObject;
  const FileName: String;
  const NewFileName: String;
  var Status: Integer;
  var FileContext: Pointer;
  var HandleContext: Pointer;
  var ResultCode: Integer
) of Object;

property OnAfterRenameOrMoveFile: TAfterRenameOrMoveFileEvent read FOnAfterRenameOrMoveFile write FOnAfterRenameOrMoveFile;

Remarks

This event fires after the file or directory specified by FileName is renamed or moved to NewFileName.

Applications need to handle this event only if they have added a standard filter rule that includes [the TBD]. FS_CE_AFTER_RENAME flag.

Note: Not everything is possible or allowed in the event handlers. For details, see the Recursive Calls topic.

A rule's mask is matched against both previous and new filenames, and the event will fire when either of the names matches the mask.

The Status parameter contains an NT status code that indicates the outcome of the operation; 0 indicates success. To convert this value to a Win32 error code, call the NtStatusToWin32Error method.

Note: This event will not fire for failed requests unless the ProcessFailedRequests property is enabled. Applications may change this parameter's value if they want a different NT status code to be returned.

The FileContext and HandleContext parameters are placeholders for application-defined data associated with the file and specific handle, respectively. Please refer to the Contexts topic for more information.

The ResultCode parameter will always be 0 when the event is fired. If the event cannot be handled in a "successful" manner for some reason (e.g., a resource is not available or security checks failed), set it to a nonzero value to report an appropriate error. Please see the Error Reporting and Handling topic for more information.

This event is fired synchronously; please refer to the Event Types topic for more information.

AfterSetAllocationSize Event (CBFilter Component)

This event fires after a file's allocation size is changed.

Syntax

type TAfterSetAllocationSizeEvent = procedure (
  Sender: TObject;
  const FileName: String;
  AllocationSize: Int64;
  var Status: Integer;
  var FileContext: Pointer;
  var HandleContext: Pointer;
  var ResultCode: Integer
) of Object;

property OnAfterSetAllocationSize: TAfterSetAllocationSizeEvent read FOnAfterSetAllocationSize write FOnAfterSetAllocationSize;

Remarks

This event fires after the allocation size of the file specified by FileName is changed.

Applications need to handle this event only if they have added a standard filter rule that includes [the TBD]. FS_CE_AFTER_SET_SIZES flag.

Note: Not everything is possible or allowed in the event handlers. For details, see the Recursive Calls topic.

The AllocationSize parameter reflects the new allocation size, in bytes. A file's allocation size is typically larger than its actual size because filesystem operations often reserve space on disk before writing additional data to a file.

The Status parameter contains an NT status code that indicates the outcome of the operation; 0 indicates success. To convert this value to a Win32 error code, call the NtStatusToWin32Error method.

Note: This event will not fire for failed requests unless the ProcessFailedRequests property is enabled. Applications may change this parameter's value if they want a different NT status code to be returned.

The FileContext and HandleContext parameters are placeholders for application-defined data associated with the file and specific handle, respectively. Please refer to the Contexts topic for more information. (If the system's cache manager or memory manager initiated the operation, HandleContext may be absent, in which case it will be nil.)

The ResultCode parameter will always be 0 when the event is fired. If the event cannot be handled in a "successful" manner for some reason (e.g., a resource is not available or security checks failed), set it to a nonzero value to report an appropriate error. Please see the Error Reporting and Handling topic for more information.

This event is fired synchronously; please refer to the Event Types topic for more information.

AfterSetEa Event (CBFilter Component)

This event fires after extended attributes of a file are changed.

Syntax

type TAfterSetEaEvent = procedure (
  Sender: TObject;
  const FileName: String;
  Buffer: Pointer;
  BufferLength: Integer;
  var Status: Integer;
  var FileContext: Pointer;
  var HandleContext: Pointer;
  var ResultCode: Integer
) of Object;

property OnAfterSetEa: TAfterSetEaEvent read FOnAfterSetEa write FOnAfterSetEa;

Remarks

This event fires after extended attributes are changed for the file specified by FileName.

If the file is created or opened with extended attributes passed in the request, this event will fire shortly after the AfterCreateFile or AfterOpenFile event.

Applications need to handle this event only if they have added a standard filter rule that includes [the TBD]. FS_CE_AFTER_SET_EA flag.

Note: Not everything is possible or allowed in the event handlers. For details, see the Recursive Calls topic.

The Buffer parameter points to a memory buffer that specifies the extended attribute information. The Length parameter reflects the length of this buffer, in bytes. Please see the Buffer Parameters topic for more information on how to work with memory buffer event parameters.

The data are formatted as a FILE_FULL_EA_INFORMATION structure; please refer to the Microsoft's documentation for more information.

The Status parameter contains an NT status code that indicates the outcome of the operation; 0 indicates success. To convert this value to a Win32 error code, call the NtStatusToWin32Error method.

Note: This event will not fire for failed requests unless the ProcessFailedRequests property is enabled. Applications may change this parameter's value if they want a different NT status code to be returned.

The FileContext and HandleContext parameters are placeholders for application-defined data associated with the file and specific handle, respectively. Please refer to the Contexts topic for more information.

The ResultCode parameter will always be 0 when the event is fired. If the event cannot be handled in a "successful" manner for some reason (e.g., a resource is not available or security checks failed), set it to a nonzero value to report an appropriate error. Please see the Error Reporting and Handling topic for more information.

This event is fired synchronously; please refer to the Event Types topic for more information.

AfterSetFileAttributes Event (CBFilter Component)

This event fires after a file or directory's attributes or times are changed.

Syntax

type TAfterSetFileAttributesEvent = procedure (
  Sender: TObject;
  const FileName: String;
  CreationTime: TDateTime;
  LastAccessTime: TDateTime;
  LastWriteTime: TDateTime;
  ChangeTime: TDateTime;
  Attributes: Integer;
  var Status: Integer;
  var FileContext: Pointer;
  var HandleContext: Pointer;
  var ResultCode: Integer
) of Object;

property OnAfterSetFileAttributes: TAfterSetFileAttributesEvent read FOnAfterSetFileAttributes write FOnAfterSetFileAttributes;

Remarks

This event fires after the attributes or times of the file or directory specified by FileName are changed.

Applications need to handle this event only if they have added a standard filter rule that includes [the TBD]. FS_CE_AFTER_SET_ATTRIBUTES flag.

Note: Not everything is possible or allowed in the event handlers. For details, see the Recursive Calls topic.

The CreationTime, LastAccessTime, LastWriteTime, and ChangeTime parameters reflect the new time values, specified in UTC. A value of January 1, 1601 00:00:00 UTC indicates that the corresponding time value was not included in the request.

The Attributes parameter reflects the new attributes; please refer to Microsoft's File Attribute Constants article for attribute descriptions.

The Status parameter contains an NT status code that indicates the outcome of the operation; 0 indicates success. To convert this value to a Win32 error code, call the NtStatusToWin32Error method.

Note: This event will not fire for failed requests unless the ProcessFailedRequests property is enabled. Applications may change this parameter's value if they want a different NT status code to be returned.

The FileContext and HandleContext parameters are placeholders for application-defined data associated with the file and specific handle, respectively. Please refer to the Contexts topic for more information.

The ResultCode parameter will always be 0 when the event is fired. If the event cannot be handled in a "successful" manner for some reason (e.g., a resource is not available or security checks failed), set it to a nonzero value to report an appropriate error. Please see the Error Reporting and Handling topic for more information.

This event is fired synchronously; please refer to the Event Types topic for more information.

AfterSetFileInfo Event (CBFilter Component)

This event fires after information about a file or directory is changed.

Syntax

type TAfterSetFileInfoEvent = procedure (
  Sender: TObject;
  const FileName: String;
  FileInformationClass: Integer;
  Buffer: Pointer;
  BufferLength: Integer;
  ValidBytes: Integer;
  var Status: Integer;
  var FileContext: Pointer;
  var HandleContext: Pointer;
  var ResultCode: Integer
) of Object;

property OnAfterSetFileInfo: TAfterSetFileInfoEvent read FOnAfterSetFileInfo write FOnAfterSetFileInfo;

Remarks

This event fires after information about the file or directory specified by FileName is changed; This event typically fires in response to the Windows API's NtSetInformationFile function.

Applications need to handle this event only if they have added a standard filter rule that includes [the TBD]. FS_CE_AFTER_SET_FILE_INFO flag.

Note: Not everything is possible or allowed in the event handlers. For details, see the Recursive Calls topic.

The FileInformationClass parameter indicates what kind of file information was set. Please refer to the NtSetInformationFile function's documentation for more information about possible values.

The Buffer parameter points to a memory buffer that, if the request was successful, contains the new file information. The BufferLength and ValidBytes parameters reflect the capacity of Buffer and the length of the data it contains (respectively), in bytes; ValidBytes may be less than BufferLength. Please see the Buffer Parameters topic for more information on how to work with memory buffer event parameters.

The format of the data is determined by the specified FileInformationClass; please refer to the NtSetInformationFile function's documentation for more information.

The Status parameter contains an NT status code that indicates the outcome of the operation; 0 indicates success. To convert this value to a Win32 error code, call the NtStatusToWin32Error method.

Note: This event will not fire for failed requests unless the ProcessFailedRequests property is enabled. Applications may change this parameter's value if they want a different NT status code to be returned.

The FileContext and HandleContext parameters are placeholders for application-defined data associated with the file and specific handle, respectively. Please refer to the Contexts topic for more information.

The ResultCode parameter will always be 0 when the event is fired. If the event cannot be handled in a "successful" manner for some reason (e.g., a resource is not available or security checks failed), set it to a nonzero value to report an appropriate error. Please see the Error Reporting and Handling topic for more information.

This event is fired synchronously; please refer to the Event Types topic for more information.

AfterSetFileSecurity Event (CBFilter Component)

This event fires after a file or directory's security attributes are changed.

Syntax

type TAfterSetFileSecurityEvent = procedure (
  Sender: TObject;
  const FileName: String;
  SecurityInformation: Integer;
  SecurityDescriptor: Pointer;
  Length: Integer;
  var Status: Integer;
  var FileContext: Pointer;
  var HandleContext: Pointer;
  var ResultCode: Integer
) of Object;

property OnAfterSetFileSecurity: TAfterSetFileSecurityEvent read FOnAfterSetFileSecurity write FOnAfterSetFileSecurity;

Remarks

This event fires after security attributes are changed for the file or directory specified by FileName.

Applications need to handle this event only if they have added a standard filter rule that includes [the TBD]. FS_CE_AFTER_SET_SECURITY flag.

Note: Not everything is possible or allowed in the event handlers. For details, see the Recursive Calls topic.

The SecurityInformation parameter reflects which pieces of security information, of those present in SecurityDescriptor, were to be set. Please refer to Microsoft's SECURITY_INFORMATION data-type documentation for more information about possible values.

The SecurityDescriptor parameter points to a memory buffer that contains the new security information. The Length parameter reflects the length of this data, in bytes. Please see the Buffer Parameters topic for more information on how to work with memory buffer event parameters.

The data are formatted as a SECURITY_DESCRIPTOR structure in self-relative format; please refer to the Microsoft's documentation for more information.

The Status parameter contains an NT status code that indicates the outcome of the operation; 0 indicates success. To convert this value to a Win32 error code, call the NtStatusToWin32Error method.

Note: This event will not fire for failed requests unless the ProcessFailedRequests property is enabled. Applications may change this parameter's value if they want a different NT status code to be returned.

The FileContext and HandleContext parameters are placeholders for application-defined data associated with the file and specific handle, respectively. Please refer to the Contexts topic for more information.

The ResultCode parameter will always be 0 when the event is fired. If the event cannot be handled in a "successful" manner for some reason (e.g., a resource is not available or security checks failed), set it to a nonzero value to report an appropriate error. Please see the Error Reporting and Handling topic for more information.

This event is fired synchronously; please refer to the Event Types topic for more information.

AfterSetFileSize Event (CBFilter Component)

This event fires after a file is resized.

Syntax

type TAfterSetFileSizeEvent = procedure (
  Sender: TObject;
  const FileName: String;
  Size: Int64;
  var Status: Integer;
  var FileContext: Pointer;
  var HandleContext: Pointer;
  var ResultCode: Integer
) of Object;

property OnAfterSetFileSize: TAfterSetFileSizeEvent read FOnAfterSetFileSize write FOnAfterSetFileSize;

Remarks

This event fires after the file specified by FileName is resized, whether explicitly (e.g., truncation) or implicitly (i.e., as data are appended).

Applications need to handle this event only if they have added a standard filter rule that includes [the TBD]. FS_CE_AFTER_SET_SIZES flag.

Note: Not everything is possible or allowed in the event handlers. For details, see the Recursive Calls topic.

The Size parameter reflects the new file size, in bytes.

The Status parameter contains an NT status code that indicates the outcome of the operation; 0 indicates success. To convert this value to a Win32 error code, call the NtStatusToWin32Error method.

Note: This event will not fire for failed requests unless the ProcessFailedRequests property is enabled. Applications may change this parameter's value if they want a different NT status code to be returned.

The FileContext and HandleContext parameters are placeholders for application-defined data associated with the file and specific handle, respectively. Please refer to the Contexts topic for more information. (If the system's cache manager or memory manager initiated the operation, HandleContext may be absent, in which case it will be nil.)

The ResultCode parameter will always be 0 when the event is fired. If the event cannot be handled in a "successful" manner for some reason (e.g., a resource is not available or security checks failed), set it to a nonzero value to report an appropriate error. Please see the Error Reporting and Handling topic for more information.

This event is fired synchronously; please refer to the Event Types topic for more information.

AfterSetReparsePoint Event (CBFilter Component)

This event fires after the OS creates or updates a reparse point on a file or directory.

Syntax

type TAfterSetReparsePointEvent = procedure (
  Sender: TObject;
  const FileName: String;
  ReparseTag: Int64;
  ReparseBuffer: Pointer;
  BufferLength: Integer;
  DataLength: Integer;
  var Status: Integer;
  var FileContext: Pointer;
  var HandleContext: Pointer;
  var ResultCode: Integer
) of Object;

property OnAfterSetReparsePoint: TAfterSetReparsePointEvent read FOnAfterSetReparsePoint write FOnAfterSetReparsePoint;

Remarks

This event fires after the OS creates or updates a reparse point on a file or directory specified by FileName.

Applications need to handle this event only if they have added a standard filter rule that includes [the TBD]. FS_CE_AFTER_SET_REPARSE_POINT flag.

Note: Not everything is possible or allowed in the event handlers. For details, see the Recursive Calls topic.

The ReparseTag parameter contains the reparse tag, which is the value the system uses to identify the format of the reparse point data. This value is also present in the ReparseBuffer data; the component extracts it and provides it separately for convenience.

The ReparseBuffer parameter points to a memory buffer that specifies the new reparse point information. The DataLength parameter reflects the length of the data contained in the buffer, in bytes. Please see the Buffer Parameters topic for more information on how to work with memory buffer event parameters.

Please refer to the Reparse Points topic for more information.

The Status parameter contains an NT status code that indicates the outcome of the operation; 0 indicates success. To convert this value to a Win32 error code, call the NtStatusToWin32Error method.

Note: This event will not fire for failed requests unless the ProcessFailedRequests property is enabled. Applications may change this parameter's value if they want a different NT status code to be returned.

The FileContext and HandleContext parameters are placeholders for application-defined data associated with the file and specific handle, respectively. Please refer to the Contexts topic for more information.

The ResultCode parameter will always be 0 when the event is fired. If the event cannot be handled in a "successful" manner for some reason (e.g., a resource is not available or security checks failed), set it to a nonzero value to report an appropriate error. Please see the Error Reporting and Handling topic for more information.

This event is fired synchronously; please refer to the Event Types topic for more information.

AfterUnlockAll Event (CBFilter Component)

This event fires after all locked byte ranges in a file are unlocked.

Syntax

type TAfterUnlockAllEvent = procedure (
  Sender: TObject;
  const FileName: String;
  var Status: Integer;
  var FileContext: Pointer;
  var HandleContext: Pointer;
  var ResultCode: Integer
) of Object;

property OnAfterUnlockAll: TAfterUnlockAllEvent read FOnAfterUnlockAll write FOnAfterUnlockAll;

Remarks

This event fires after all locked byte ranges in the file specified by FileName are unlocked.

Applications need to handle this event only if they have added a standard filter rule that includes [the TBD]. FS_CE_AFTER_LOCK_CONTROL flag.

Note: Not everything is possible or allowed in the event handlers. For details, see the Recursive Calls topic.

The Status parameter contains an NT status code that indicates the outcome of the operation; 0 indicates success. To convert this value to a Win32 error code, call the NtStatusToWin32Error method.

Note: This event will not fire for failed requests unless the ProcessFailedRequests property is enabled. Applications may change this parameter's value if they want a different NT status code to be returned.

The FileContext and HandleContext parameters are placeholders for application-defined data associated with the file and specific handle, respectively. Please refer to the Contexts topic for more information.

The ResultCode parameter will always be 0 when the event is fired. If the event cannot be handled in a "successful" manner for some reason (e.g., a resource is not available or security checks failed), set it to a nonzero value to report an appropriate error. Please see the Error Reporting and Handling topic for more information.

This event is fired synchronously; please refer to the Event Types topic for more information.

AfterUnlockAllByKey Event (CBFilter Component)

This event fires after all locked byte ranges in a file, associated with a particular key, are unlocked.

Syntax

type TAfterUnlockAllByKeyEvent = procedure (
  Sender: TObject;
  const FileName: String;
  Key: Int64;
  var Status: Integer;
  var FileContext: Pointer;
  var HandleContext: Pointer;
  var ResultCode: Integer
) of Object;

property OnAfterUnlockAllByKey: TAfterUnlockAllByKeyEvent read FOnAfterUnlockAllByKey write FOnAfterUnlockAllByKey;

Remarks

This event fires after all locked byte ranges in the file specified by FileName, and associated with the specified Key, are unlocked.

Applications need to handle this event only if they have added a standard filter rule that includes [the TBD]. FS_CE_AFTER_LOCK_CONTROL flag.

Note: Not everything is possible or allowed in the event handlers. For details, see the Recursive Calls topic.

The Key parameter contains the key value specified when the byte ranges were locked. Please refer to the AfterLock event's documentation for more information.

The Status parameter contains an NT status code that indicates the outcome of the operation; 0 indicates success. To convert this value to a Win32 error code, call the NtStatusToWin32Error method.

Note: This event will not fire for failed requests unless the ProcessFailedRequests property is enabled. Applications may change this parameter's value if they want a different NT status code to be returned.

The ResultCode parameter will always be 0 when the event is fired. If the event cannot be handled in a "successful" manner for some reason (e.g., a resource is not available or security checks failed), set it to a nonzero value to report an appropriate error. Please see the Error Reporting and Handling topic for more information.

This event is fired synchronously; please refer to the Event Types topic for more information.

AfterUnlockSingle Event (CBFilter Component)

This event fires after a particular locked byte range in a file is unlocked.

Syntax

type TAfterUnlockSingleEvent = procedure (
  Sender: TObject;
  const FileName: String;
  Offset: Int64;
  Length: Int64;
  Key: Int64;
  var Status: Integer;
  var FileContext: Pointer;
  var HandleContext: Pointer;
  var ResultCode: Integer
) of Object;

property OnAfterUnlockSingle: TAfterUnlockSingleEvent read FOnAfterUnlockSingle write FOnAfterUnlockSingle;

Remarks

This event fires after a particular locked byte range in the file specified by FileName is unlocked.

Applications need to handle this event only if they have added a standard filter rule that includes [the TBD]. FS_CE_AFTER_LOCK_CONTROL flag.

Note: Not everything is possible or allowed in the event handlers. For details, see the Recursive Calls topic.

The Offset, Length, and Key parameters contain the starting byte offset, length, and key values (respectively) specified when the byte range was locked. Please refer to the AfterLock event's documentation for more information.

The Status parameter contains an NT status code that indicates the outcome of the operation; 0 indicates success. To convert this value to a Win32 error code, call the NtStatusToWin32Error method.

Note: This event will not fire for failed requests unless the ProcessFailedRequests property is enabled. Applications may change this parameter's value if they want a different NT status code to be returned.

The ResultCode parameter will always be 0 when the event is fired. If the event cannot be handled in a "successful" manner for some reason (e.g., a resource is not available or security checks failed), set it to a nonzero value to report an appropriate error. Please see the Error Reporting and Handling topic for more information.

This event is fired synchronously; please refer to the Event Types topic for more information.

AfterWriteFile Event (CBFilter Component)

This event fires after data are written to a file.

Syntax

type TAfterWriteFileEvent = procedure (
  Sender: TObject;
  const FileName: String;
  Position: Int64;
  Buffer: Pointer;
  BufferLength: Integer;
  BytesToWrite: Integer;
  Direction: Integer;
  var BytesWritten: Integer;
  var Status: Integer;
  var FileContext: Pointer;
  var HandleContext: Pointer;
  var ResultCode: Integer
) of Object;

property OnAfterWriteFile: TAfterWriteFileEvent read FOnAfterWriteFile write FOnAfterWriteFile;

Remarks

This event fires after data are written to the file specified by FileName.

Applications may use this event to inspect the data that were written to the file, but must not attempt to alter said data. If, during BeforeWriteFile, an application causes less data than requested to be written to the file, it should use this event to set BytesWritten back to the expected value (i.e., BytesToWrite) to prevent the requestor from behaving unexpectedly.

Applications need to handle this event only if they have added a standard filter rule that includes [the TBD]. FS_CE_AFTER_WRITE flag.

Note: Not everything is possible or allowed in the event handlers. For details, see the Recursive Calls topic.

The Position parameter reflects the byte offset in the file at which writing started. A value of -1 means "append to the end of the file".

The Buffer parameter points to a memory buffer that contains the data that, if the request was successful, were written to the file. The BufferLength parameter reflects the capacity of Buffer, in bytes. Please see the Buffer Parameters topic for more information on how to work with memory buffer event parameters.

The BytesToWrite parameter reflects how many bytes were to be written to the file (i.e., how many bytes the requestor expects will be written).

The Direction parameter indicates the request direction; please refer to the Cached and Non-Cached Requests topic for more information. Possible values are as follows:

The BytesWritten parameter specifies how many bytes were actually written to the file. This parameter's value must not exceed BufferLength (and should not exceed BytesToWrite; please refer to BeforeWriteFile for more information).

The Status parameter contains an NT status code that indicates the outcome of the operation; 0 indicates success. To convert this value to a Win32 error code, call the NtStatusToWin32Error method.

Note: This event will not fire for failed requests unless the ProcessFailedRequests property is enabled. Applications may change this parameter's value if they want a different NT status code to be returned.

The FileContext and HandleContext parameters are placeholders for application-defined data associated with the file and specific handle, respectively. Please refer to the Contexts topic for more information. (If the system's cache manager or memory manager initiated the operation, HandleContext may be absent, in which case it will be nil.)

The ResultCode parameter will always be 0 when the event is fired. If the event cannot be handled in a "successful" manner for some reason (e.g., a resource is not available or security checks failed), set it to a nonzero value to report an appropriate error. Please see the Error Reporting and Handling topic for more information.

This event is fired synchronously; please refer to the Event Types topic for more information.

BeforeCanFileBeDeleted Event (CBFilter Component)

This event fires before the OS attempts to mark a file or directory for deletion or remove such a mark.

Syntax

type TBeforeCanFileBeDeletedEvent = procedure (
  Sender: TObject;
  const FileName: String;
  RequestType: Integer;
  var CanDelete: Boolean;
  var FileContext: Pointer;
  var HandleContext: Pointer;
  var ProcessRequest: Boolean;
  var ResultCode: Integer
) of Object;

property OnBeforeCanFileBeDeleted: TBeforeCanFileBeDeletedEvent read FOnBeforeCanFileBeDeleted write FOnBeforeCanFileBeDeleted;

Remarks

This event fires before the OS marks the file or directory specified by FileName for deletion or removes such a mark.

Files and directories can be deleted in two ways: (1) a file or directory can be opened with the FILE_FLAG_DELETE_ON_CLOSE flag, or (2) some process may call Windows API's NtSetInformationFile function with FILE_DISPOSITION_INFORMATION or FILE_DISPOSITION_INFORMATION_EX structure as a parameter.

If the file or directory is created or opened with the FILE_FLAG_DELETE_ON_CLOSE flag, this event is fired shortly before the BeforeCreateFile or BeforeOpenFile event.

Applications need to handle this event only if they have added a standard filter rule that includes [the TBD]. FS_CE_BEFORE_CAN_DELETE flag.

Note: Not everything is possible or allowed in the event handlers. For details, see the Recursive Calls topic.

The RequestType indicates which kind of system request resulted in firing this event. It can be one of the following:

The CanDelete parameter specifies whether the file or directory will be deleted. This parameter can be True or False depending on which request the OS has sent. Applications may prevent deletion of the file or directory by setting CanDelete to False. Changing CanDelete from False to True may or may not have the effect on the file being deleted later, so such a change should be avoided.

Note: If the file is opened with FILE_FLAG_DELETE_ON_CLOSE flag set and the event handler permits file deletion, such flag cannot be removed later (even with the call to NtSetInformationFile() API function).

The ProcessRequest parameter controls whether the request is sent onward for further processing by subsequent filter drivers and the filesystem; it is True by default.

The effect of ProcessRequest depends on what operation caused the event to fire:

• If the event fires during the file open operation where the FILE_FLAG_DELETE_ON_CLOSE flag is set,
  • setting CanDelete to False and ProcessRequest to True causes the FILE_FLAG_DELETE_ON_CLOSE flag to be removed and the file open request to be passed further to the filesystem; and
  • setting CanDelete to False and ProcessRequest to False causes the file open request to fail with ACCESS_DENIED error.
• If the event fires in the context of the call to NtSetInformationFile Windows API function, setting CanDelete to False causes the DeleteFlag parameter to be set to False and the request to be passed further to the filesystem. This combination effectively resets the file deletion state, known to the filesystem, to the False ("do not delete") value. The value of ProcessRequest in this case does not matter as the new value must reach the filesystem.

The FileContext and HandleContext parameters are placeholders for application-defined data associated with the file and specific handle, respectively. Please refer to the Contexts topic for more information. (If the specified file or directory was not opened before the request, both contexts will be absent, in which case these parameters will be nil.)

The ResultCode parameter will always be 0 when the event is fired. If the event cannot be handled in a "successful" manner for some reason (e.g., a resource is not available or security checks failed), set it to a nonzero value to report an appropriate error. Please see the Error Reporting and Handling topic for more information.

This event is fired synchronously; please refer to the Event Types topic for more information.

BeforeCleanupFile Event (CBFilter Component)

This event fires before a file or directory handle is closed.

Syntax

type TBeforeCleanupFileEvent = procedure (
  Sender: TObject;
  const FileName: String;
  var FileContext: Pointer;
  var HandleContext: Pointer;
  var ResultCode: Integer
) of Object;

property OnBeforeCleanupFile: TBeforeCleanupFileEvent read FOnBeforeCleanupFile write FOnBeforeCleanupFile;

Remarks

This event fires before a handle to the file or directory specified by FileName is closed. This event differs from BeforeCloseFile in that BeforeCleanupFile fires immediately before an open handle to the specified file or directory is closed by a process, whereas BeforeCloseFile may be fired much later when the OS itself decides that the file or directory can be formally closed.

Other events may fire for the file or directory in the time between when this event fires and when the BeforeCloseFile event fires. For example, system components such as the memory manager or cache manager may cause the BeforeReadFile and BeforeWriteFile events to fire.

Applications need to handle this event only if they have added a standard filter rule that includes [the TBD]. FS_CE_BEFORE_CLEANUP flag.

Note: Not everything is possible or allowed in the event handlers. For details, see the Recursive Calls topic.

The FileContext and HandleContext parameters are placeholders for application-defined data associated with the file and specific handle, respectively. Please refer to the Contexts topic for more information.

The ResultCode parameter will always be 0 when the event is fired. If the event cannot be handled in a "successful" manner for some reason (e.g., a resource is not available or security checks failed), set it to a nonzero value to report an appropriate error. Please see the Error Reporting and Handling topic for more information.

This event is fired synchronously; please refer to the Event Types topic for more information.

BeforeCloseFile Event (CBFilter Component)

This event fires before a file or directory is closed.

Syntax

type TBeforeCloseFileEvent = procedure (
  Sender: TObject;
  const FileName: String;
  var FileContext: Pointer;
  var HandleContext: Pointer;
  var ResultCode: Integer
) of Object;

property OnBeforeCloseFile: TBeforeCloseFileEvent read FOnBeforeCloseFile write FOnBeforeCloseFile;

Remarks

This event fires before the file or directory specified by FileName is closed.

Applications need to handle this event only if they have added a standard filter rule that includes [the TBD]. FS_CE_BEFORE_CLOSE flag.

Note: Not everything is possible or allowed in the event handlers. For details, see the Recursive Calls topic.

The FileContext and HandleContext parameters are placeholders for application-defined data associated with the file and specific handle, respectively. Please refer to the Contexts topic for more information.

If the file or directory was marked for deletion earlier, the BeforeDeleteFile will fire shortly before this event.

The ResultCode parameter will always be 0 when the event is fired. If the event cannot be handled in a "successful" manner for some reason (e.g., a resource is not available or security checks failed), set it to a nonzero value to report an appropriate error. Please see the Error Reporting and Handling topic for more information.

This event is fired synchronously; please refer to the Event Types topic for more information.

BeforeCreateFile Event (CBFilter Component)

This event fires before a file or directory is created.

Syntax

type TBeforeCreateFileEvent = procedure (
  Sender: TObject;
  const FileName: String;
  ExistingAttributes: Integer;
  var Isolate: Boolean;
  var BackendFileName: String;
  var DesiredAccess: Integer;
  var Attributes: Integer;
  var ShareMode: Integer;
  var Options: Integer;
  var CreateDisposition: Integer;
  SecurityDescriptor: Pointer;
  Length: Integer;
  var FileContext: Pointer;
  var HandleContext: Pointer;
  var ProcessRequest: Boolean;
  var ResultCode: Integer
) of Object;

property OnBeforeCreateFile: TBeforeCreateFileEvent read FOnBeforeCreateFile write FOnBeforeCreateFile;

Remarks

This event fires before the file or directory specified by FileName is created. Please refer to the File Create/Open Events topic for more information about how the component determines whether to fire this event or BeforeOpenFile.

Applications may use this event to modify the request's parameters, or to block the request entirely. To do the latter, set ProcessRequest to False; this has the same effect as returning ACCESS_DENIED.

To redirect a request to another file or directory, use the ReparseFileName event, which is fired shortly after this event.

Applications need to handle this event only if they have added a standard filter rule that includes [the TBD]. FS_CE_BEFORE_CREATE flag.

Note: Applications must have the FilterOwnRequests configuration setting enabled if they wish to filter their own file/directory creation requests.

Note: Not everything is possible or allowed in the event handlers. For details, see the Recursive Calls topic.

When extended rules are used or the AlwaysRequestAttributesOnOpen configuration setting is enabled, the driver requests attributes of the entity from the filesystem and passes them to ExistingAttributes. If the attributes are not requested, this parameter contains 0.

Isolation-related functionality is under construction.

The initial values of DesiredAccess, Attributes, ShareMode, and CreateDisposition parameters reflect the values that were passed for the similarly named parameters of the Windows API's CreateFile function (or, more accurately, the values carried by the IRP_MJ_CREATE Internet Relay Programming).

DesiredAccess may contain one or more of the following access flags:

Attributes may contain one or more of the following attributes:

ShareMode may contain zero or more of the following share mode flags:

CreateDisposition may contain one of the following values:

Options contains the flags that are described in the CreateOptions parameter of the Native API's ZwCreateFile function. Most of those flags correspond to flags passed in the FlagsAndAttributes parameter of the Windows API's CreateFile function, but some flags are specific to Native API. If you need those flags, check both functions' descriptions.

Please refer to Microsoft's documentation for detailed information about these constants.

To determine whether the request is for a file or a directory, compare Attributes against the FILE_SYS_ATTR_DIRECTORY constant, as follows: // Check whether the request is for a file or a directory. bool isDirectory = Attributes & FILE_SYS_ATTR_DIRECTORY == FILE_SYS_ATTR_DIRECTORY; FILE_SYS_ATTR_DIRECTORY will be present only if it was specified by the calling process; its presence or absence does not indicate the real presence of the attribute on the file or directory on disk.

To determine whether a file will be deleted when its last handle is closed, compare Options against the Windows API's FILE_FLAG_DELETE_ON_CLOSE constant, as follows: // Check whether the file will be deleted on close. bool deleteOnClose = Options & FILE_FLAG_DELETE_ON_CLOSE == FILE_FLAG_DELETE_ON_CLOSE;

Note: Files can be deleted in different ways, so do not use this check to take actions related to tracking file deletion operations. Instead, use the events related to file deletion.

To prevent a file or directory from being opened, set the ResultCode parameter to a non-zero value (typically ERROR_ACCESS_DENIED (5)).

When a file or directory is created using the CreateFile() Windows API function, a caller can specify the security descriptor with the security information. This security information should be applied to a newly created file or directory. The component passes this security information in the SecurityInformation and SecurityDescriptor parameters, when the PassSecurityInFileOpenEvents configuration setting is enabled. If this configuration setting is omitted, the corresponding parameters are empty.

The SecurityInformation parameter reflects which pieces of security information, of those present in SecurityDescriptor, are valid and should have been applied. Please refer to Microsoft's SECURITY_INFORMATION data type documentation for more information about possible values.

The SecurityDescriptor parameter points to a memory buffer that contains the security information. The Length parameter reflects the length of this data, in bytes. Please see the Buffer Parameters topic for more information on how to work with memory buffer event parameters.

The data are formatted as a SECURITY_DESCRIPTOR structure in self-relative format; please refer to the Microsoft's documentation for more information.

If an application needs to alter the security information, it can do this by placing up to Length bytes of information into the SecurityDescriptor buffer.

Note: Changing the security data is possible only when the PassSecurityInFileOpenEvents configuration setting is enabled.

If the capacity reflected by the Length parameter is not enough to accommodate the security information, set LengthNeeded to the number of bytes necessary to hold the data, and return the ERROR_INSUFFICIENT_BUFFER error code via ResultCode.

The ProcessRequest parameter controls whether the request is sent onward for further processing by subsequent filter drivers and the filesystem; it is True by default.

If the Options contains the FILE_FLAG_DELETE_ON_CLOSE flag, the BeforeCanFileBeDeleted event will fire before this event.

If the file is opened with extended attributes passed in the request, the BeforeSetEa event will fire after this event.

The ResultCode parameter will always be 0 when the event is fired. If the event cannot be handled in a "successful" manner for some reason (e.g., a resource is not available or security checks failed), set it to a nonzero value to report an appropriate error. Please see the Error Reporting and Handling topic for more information.

This event is fired synchronously; please refer to the Event Types topic for more information.

BeforeCreateHardLink Event (CBFilter Component)

This event fires before a hard link is created.

Syntax

type TBeforeCreateHardLinkEvent = procedure (
  Sender: TObject;
  const FileName: String;
  const LinkName: String;
  var ReplaceIfExists: Boolean;
  var FileContext: Pointer;
  var HandleContext: Pointer;
  var ProcessRequest: Boolean;
  var ResultCode: Integer
) of Object;

property OnBeforeCreateHardLink: TBeforeCreateHardLinkEvent read FOnBeforeCreateHardLink write FOnBeforeCreateHardLink;

Remarks

This event fires before a hard link to the file specified by FileName is created. Please refer to Microsoft's Hard Links article for more information about hard links.

Applications may use this event to modify the request's parameters, or to block the request entirely. To do the latter, set ProcessRequest to False.

Applications need to handle this event only if they have added a standard filter rule that includes [the TBD]. FS_CE_BEFORE_CREATE_HARD_LINK flag.

Note: Not everything is possible or allowed in the event handlers. For details, see the Recursive Calls topic.

The LinkName parameter reflects the name of the new hard link.

The ReplaceIfExists parameter specifies what to do if a hard link with the specified LinkName already exists. If this parameter is True, the new hard link will replace the existing hard link; if this parameter is False, the operation will fail.

The FileContext and HandleContext parameters are placeholders for application-defined data associated with the file and specific handle, respectively. Please refer to the Contexts topic for more information.

The ProcessRequest parameter controls whether the request is sent onward for further processing by subsequent filter drivers and the filesystem; it is True by default.

The ResultCode parameter will always be 0 when the event is fired. If the event cannot be handled in a "successful" manner for some reason (e.g., a resource is not available or security checks failed), set it to a nonzero value to report an appropriate error. Please see the Error Reporting and Handling topic for more information.

This event is fired synchronously; please refer to the Event Types topic for more information.

BeforeDeleteFile Event (CBFilter Component)

This event fires before a file or directory is deleted.

Syntax

type TBeforeDeleteFileEvent = procedure (
  Sender: TObject;
  const FileName: String;
  RequestType: Integer;
  var FileContext: Pointer;
  var HandleContext: Pointer;
  var ResultCode: Integer
) of Object;

property OnBeforeDeleteFile: TBeforeDeleteFileEvent read FOnBeforeDeleteFile write FOnBeforeDeleteFile;

Remarks

This event fires before the file or directory specified by FileName is deleted. More specifically, this event is fired before the final IRM_MJ_CLOSE Internet Relay Programming (IRP) is processed by the filesystem and before BeforeCloseFile fires.

Applications may use this event to obtain information about the specified file or directory, which still exists at the time this event fires. This event cannot be used to prevent a deletion; use the BeforeCanFileBeDeleted event instead.

Applications need to handle this event only if they have added a standard filter rule that includes [the TBD]. FS_CE_BEFORE_DELETE flag.

Note: Not everything is possible or allowed in the event handlers. For details, see the Recursive Calls topic.

The RequestType indicates which kind of system request resulted in firing this event. It can be one of the following:

The FileContext and HandleContext parameters are placeholders for application-defined data associated with the file and specific handle, respectively. Please refer to the Contexts topic for more information.

The ResultCode parameter will always be 0 when the event is fired. If the event cannot be handled in a "successful" manner for some reason (e.g., a resource is not available or security checks failed), set it to a nonzero value to report an appropriate error. Please see the Error Reporting and Handling topic for more information.

This event is fired synchronously; please refer to the Event Types topic for more information.

BeforeDeleteReparsePoint Event (CBFilter Component)

This event fires when the OS wants to delete a reparse point from a file or directory.

Syntax

type TBeforeDeleteReparsePointEvent = procedure (
  Sender: TObject;
  const FileName: String;
  ReparseBuffer: Pointer;
  BufferLength: Integer;
  var FileContext: Pointer;
  var HandleContext: Pointer;
  var ProcessRequest: Boolean;
  var ResultCode: Integer
) of Object;

property OnBeforeDeleteReparsePoint: TBeforeDeleteReparsePointEvent read FOnBeforeDeleteReparsePoint write FOnBeforeDeleteReparsePoint;

Remarks

This event fires before the OS deletes a reparse point from a file or directory specified by FileName.

Note: The file or directory is not deleted, only the reparse point is.

Applications need to handle this event only if they have added a standard filter rule that includes [the TBD]. FS_CE_BEFORE_DELETE_REPARSE_POINT flag.

Note: Not everything is possible or allowed in the event handlers. For details, see the Recursive Calls topic.

The ReparseBuffer parameter points to a memory buffer that specifies the known reparse point information. This information is provided for convenience. Please see the Buffer Parameters topic for more information on how to work with memory buffer event parameters.

Please refer to the Reparse Points topic for more information.

The FileContext and HandleContext parameters are placeholders for application-defined data associated with the file and specific handle, respectively. Please refer to the Contexts topic for more information.

The ProcessRequest parameter controls whether the request is sent onward for further processing by subsequent filter drivers and the filesystem; it is True by default.

The ResultCode parameter will always be 0 when the event is fired. If the event cannot be handled in a "successful" manner for some reason (e.g., a resource is not available or security checks failed), set it to a nonzero value to report an appropriate error. Please see the Error Reporting and Handling topic for more information.

This event is fired synchronously; please refer to the Event Types topic for more information.

BeforeEnumerateDirectory Event (CBFilter Component)

This event fires when an enumeration request is sent by the OS.

Syntax

type TBeforeEnumerateDirectoryEvent = procedure (
  Sender: TObject;
  const DirectoryName: String;
  Flags: Integer;
  const Mask: String;
  Index: Integer;
  var DirectoryContext: Pointer;
  var HandleContext: Pointer;
  var EnumerationContext: Pointer;
  var ProcessRequest: Boolean;
  var ResultCode: Integer
) of Object;

property OnBeforeEnumerateDirectory: TBeforeEnumerateDirectoryEvent read FOnBeforeEnumerateDirectory write FOnBeforeEnumerateDirectory;

Remarks

This event fires when the OS sends a request for reading one or more entries of the directory specified by DirectoryName.

Applications may use this event to record the request and optionally block it.

Applications need to handle this event only if they have added a standard filter rule that includes [the TBD]. FS_CE_BEFORE_ENUMERATE_DIRECTORY flag.

Note: Not everything is possible or allowed in the event handlers. For details, see the Recursive Calls topic.

The Flags parameter specifies supplementary information about enumeration. It is a combination of zero or more values:

If the Flags parameter contains FS_ENUM_INDEX_SPECIFIED, the Index parameter contains the index as provided by the OS.

The Mask parameter contains the mask for the enumeration. This value may contain any combination of valid filename characters and wildcards (the * and ? characters). Alternatively, it may be an exact filename (i.e., a value without any wildcards), as some applications query file information by specifying an exact filename in an enumeration. When TranslateDOSCharsInEnumMasks is False, this parameter may contain a so-called DOS wildcard (please, refer to the description of this setting for more information). The mask can also be empty in rare cases: this happens when the OS request is a continuation of a previous enumeration with a valid non-zero Index.

The DirectoryContext, HandleContext, and EnumerationContext parameters are placeholders for application-defined data associated with the directory, specific handle, and enumeration, respectively. (For general-purpose events, the DirectoryContext is called FileContext instead.) DirectoryContext corresponds to the FileContext in the file/directory creation, opening, and closing events. Please refer to the Contexts topic for more information.

The ProcessRequest parameter controls whether the request is sent onward for further processing by subsequent filter drivers and the filesystem; it is True by default.

The ResultCode parameter will always be 0 when the event is fired. If the event cannot be handled in a "successful" manner for some reason (e.g., a resource is not available or security checks failed), set it to a nonzero value to report an appropriate error. Please see the Error Reporting and Handling topic for more information.

This event is fired synchronously; please refer to the Event Types topic for more information.

BeforeFilterAttachToVolume Event (CBFilter Component)

This event fires before the filter attaches to a newly mounted filesystem volume.

Syntax

type TBeforeFilterAttachToVolumeEvent = procedure (
  Sender: TObject;
  const VolumeName: String;
  var SkipVolume: Boolean;
  var ResultCode: Integer
) of Object;

property OnBeforeFilterAttachToVolume: TBeforeFilterAttachToVolumeEvent read FOnBeforeFilterAttachToVolume write FOnBeforeFilterAttachToVolume;

Remarks

This event fires before the filter attaches to the newly mounted filesystem volume specified by VolumeName. Please refer to the FireVolumeEvents property for more information.

Applications need to handle this event only if the FireVolumeEvents property includes the FS_MOUNT_CONTROL flag.

The VolumeName parameter's value is always an NT native format in this event (unlike the other volume-related events, listed below, where its format depends on the ResolveNtDeviceToDriveLetter configuration setting). It is therefore recommended that applications add volume-specific rules, if desired, during the AfterFilterAttachToVolume event rather than this one. Applications can obtain additional information about a volume by retrieving its GUID using the GetVolumeGUID method, and then using that GUID to call various Windows API functions.

The SkipVolume parameter specifies whether the component's system driver should skip the specified volume (i.e., not attach the filter to it). Setting this parameter to True will cause all filesystem operations that target to volume to be completely ignored by the component's system driver. It also will prevent any of the following events from firing for the volume:

• AfterFilterAttachToVolume
• NotifyFilterAttachToVolume
• AfterFilterDetachFromVolume
• NotifyFilterDetachFromVolume

The ResultCode parameter will always be 0 when the event is fired. If the event cannot be handled in a "successful" manner for some reason (e.g., a resource is not available or security checks failed), set it to a nonzero value to report an appropriate error. Please see the Error Reporting and Handling topic for more information.

This event is fired synchronously; please refer to the Event Types topic for more information.

Applications must be aware that this event fires as a direct response to a filesystem state change (mount or unmount). Various system components or third-party actors can perform supplementary filesystem mounting and unmounting during main unmount operations (e.g., Volume Service is one such component). This can cause seemingly excessive events to be fired, and sometimes they can be fired out of order (such as two *Attach or *Detach events fired in a row).

BeforeFsctl Event (CBFilter Component)

This event fires before an IRP_MJ_FILE_SYSTEM_CONTROL request is processed.

Syntax

type TBeforeFsctlEvent = procedure (
  Sender: TObject;
  const FileName: String;
  FsControlCode: Integer;
  InBuffer: Pointer;
  InBufferLength: Integer;
  var InBufferValidBytes: Integer;
  OutBuffer: Pointer;
  OutBufferLength: Integer;
  var OutBufferValidBytes: Integer;
  var FileContext: Pointer;
  var HandleContext: Pointer;
  var ProcessRequest: Boolean;
  var ResultCode: Integer
) of Object;

property OnBeforeFsctl: TBeforeFsctlEvent read FOnBeforeFsctl write FOnBeforeFsctl;

Remarks

This event fires before an IRP_MJ_FILE_SYSTEM_CONTROL (FSCTL) request is processed. Such requests are sent using the Windows API's DeviceIoControl function (user mode), or ZwFsControlFile function (kernel mode); please refer to Microsoft's documentation for more information.

Applications may use this event to modify the input data (if there are any) before the request continues onward. Applications that choose to do this must do the following:

1. Copy no more than InBufferLength bytes into InBuffer.
2. Update the InBufferValidBytes parameter's value afterward so that it correctly reflects the amount of data in InBuffer.

Alternatively, applications may use this event to handle the request (preventing it from continuing onward), in which case they must do the following:

1. Copy no more than OutBufferLength bytes into OutBuffer.
2. Update the OutBufferValidBytes parameter's value afterward so that it correctly reflects the amount of data in OutBuffer.
3. Set ProcessRequest to False to indicate that the request has been handled and should not continue onward.

(The first two steps are not applicable if the requested operation is not expected to return data.)

Applications need to handle this event only if they have added a standard filter rule that includes [the TBD]. FS_CE_BEFORE_FSCTL flag.

Note: Not everything is possible or allowed in the event handlers. For details, see the Recursive Calls topic.

The FileName parameter reflects the file, directory, or volume targeted by the request.

The FsControlCode parameter reflects the requested filesystem control code (FSCTL).

The InBuffer parameter points to a memory buffer that contains the data required to perform the operation. The InBufferLength and InBufferValidBytes parameters reflect the capacity of InBuffer and the length of the data it contains (respectively), in bytes; InBufferValidBytes may be less than InBufferLength (unless the request did not include data, in which case both will be 0).

The OutBuffer parameter points to a memory buffer that receives the data returned by the operation. The OutBufferLength and OutBufferValidBytes parameters reflect the capacity of OutBuffer and the length of the data it contains (respectively), in bytes; OutBufferValidBytes may be less than OutBufferLength (unless the operation is not expected to return data, in which case both will be 0).

Please see the Buffer Parameters topic for more information on how to work with memory buffer event parameters.

The ProcessRequest parameter controls whether the request is sent onward for further processing by subsequent filter drivers and the filesystem; it is True by default.

The FileContext and HandleContext parameters are placeholders for application-defined data associated with the file and specific handle, respectively. Please refer to the Contexts topic for more information.

The ResultCode parameter will always be 0 when the event is fired. If the event cannot be handled in a "successful" manner for some reason (e.g., a resource is not available or security checks failed), set it to a nonzero value to report an appropriate error. Please see the Error Reporting and Handling topic for more information.

This event is fired synchronously; please refer to the Event Types topic for more information.

BeforeGetFileSecurity Event (CBFilter Component)

This event fires before a file or directory's security attributes are retrieved.

Syntax

type TBeforeGetFileSecurityEvent = procedure (
  Sender: TObject;
  const FileName: String;
  SecurityInformation: Integer;
  SecurityDescriptor: Pointer;
  Length: Integer;
  var LengthNeeded: Integer;
  var FileContext: Pointer;
  var HandleContext: Pointer;
  var ProcessRequest: Boolean;
  var ResultCode: Integer
) of Object;

property OnBeforeGetFileSecurity: TBeforeGetFileSecurityEvent read FOnBeforeGetFileSecurity write FOnBeforeGetFileSecurity;

Remarks

This event fires before security attributes are retrieved for the file or directory specified by FileName.

Note: This event will not fire every time a file or directory is accessed. To check file security upon each access to a file or directory, implement the file create and open events and perform the necessary checks there instead.

Applications need to handle this event only if they have added a standard filter rule that includes [the TBD]. FS_CE_BEFORE_GET_SECURITY flag.

Note: Not everything is possible or allowed in the event handlers. For details, see the Recursive Calls topic.

The SecurityInformation parameter indicates which pieces of security information are requested. Please refer to Microsoft's SECURITY_INFORMATION data-type documentation for more information about possible values.

The SecurityDescriptor parameter points to a memory buffer that receives the requested security information. The buffer referenced by the SecurityDescriptor parameter may be modified by the event handler if the operation is completed without passing it further to other filters and the filesystem driver. The Length parameter reflects the capacity of the SecurityDescriptor buffer, in bytes.

If the capacity reflected by the Length parameter is not sufficient to accommodate the security information, set LengthNeeded to the number of bytes necessary to hold the data, and return the ERROR_INSUFFICIENT_BUFFER error code via ResultCode.

Please see the Buffer Parameters topic for more information on how to work with memory buffer event parameters.

The returned data will be formatted as a SECURITY_DESCRIPTOR structure in self-relative format; please refer to the Microsoft's documentation for more information.

The FileContext and HandleContext parameters are placeholders for application-defined data associated with the file and specific handle, respectively. Please refer to the Contexts topic for more information.

The ProcessRequest parameter controls whether the request is sent onward for further processing by subsequent filter drivers and the filesystem; it is True by default.

The ResultCode parameter will always be 0 when the event is fired. If the event cannot be handled in a "successful" manner for some reason (e.g., a resource is not available or security checks failed), set it to a nonzero value to report an appropriate error. Please see the Error Reporting and Handling topic for more information.

This event is fired synchronously; please refer to the Event Types topic for more information.

BeforeGetReparsePoint Event (CBFilter Component)

This event fires when the OS wants to read a reparse point for a file or directory.

Syntax

type TBeforeGetReparsePointEvent = procedure (
  Sender: TObject;
  const FileName: String;
  ReparseBuffer: Pointer;
  var ReparseBufferLength: Integer;
  var FileContext: Pointer;
  var HandleContext: Pointer;
  var ProcessRequest: Boolean;
  var ResultCode: Integer
) of Object;

property OnBeforeGetReparsePoint: TBeforeGetReparsePointEvent read FOnBeforeGetReparsePoint write FOnBeforeGetReparsePoint;

Remarks

This event fires when the OS wants to read a reparse point for the file or directory specified by FileName.

Applications need to handle this event only if they have added a standard filter rule that includes [the TBD]. FS_CE_BEFORE_GET_REPARSE_POINT flag.

Note: Not everything is possible or allowed in the event handlers. For details, see the Recursive Calls topic.

If an application desires to handle the event and does not pass the request further, it needs to fill ReparseBuffer with the reparse point data associated with the specified file or directory and set ReparseBufferLength to the number of bytes written. The ReparseBufferLength parameter's initial value reflects the capacity of the memory buffer pointed to by ReparseBuffer. If the buffer is too small to hold all of the reparse point data, then the application should write as much data to it as possible, set ReparseBufferLength appropriately, and return the ERROR_MORE_DATA error code via ResultCode.

Please refer to the Reparse Points topic for more information.

Please see the Buffer Parameters topic for more information on how to work with memory buffer event parameters.

The FileContext and HandleContext parameters are placeholders for application-defined data associated with the file and specific handle, respectively. Please refer to the Contexts topic for more information.

Depending on how the request originator accessed the specified file or directory, it may or may not currently be open. The FileContext and HandleContext parameters will be absent if it is not open, in which case they will be nil.

The ProcessRequest parameter controls whether the request is sent onward for further processing by subsequent filter drivers and the filesystem; it is True by default.

The ResultCode parameter will always be 0 when the event is fired. If the event cannot be handled in a "successful" manner for some reason (e.g., a resource is not available or security checks failed), set it to a nonzero value to report an appropriate error. Please see the Error Reporting and Handling topic for more information.

This event is fired synchronously; please refer to the Event Types topic for more information.

BeforeIoctl Event (CBFilter Component)

This event fires before an IRP_MJ_DEVICE_CONTROL request is processed.

Syntax

type TBeforeIoctlEvent = procedure (
  Sender: TObject;
  const FileName: String;
  IoControlCode: Integer;
  InBuffer: Pointer;
  InBufferLength: Integer;
  var InBufferValidBytes: Integer;
  OutBuffer: Pointer;
  OutBufferLength: Integer;
  var OutBufferValidBytes: Integer;
  var FileContext: Pointer;
  var HandleContext: Pointer;
  var ProcessRequest: Boolean;
  var ResultCode: Integer
) of Object;

property OnBeforeIoctl: TBeforeIoctlEvent read FOnBeforeIoctl write FOnBeforeIoctl;

Remarks

This event fires before an IRP_MJ_DEVICE_CONTROL (IOCTL) request is processed. Such requests are sent using the Windows API's DeviceIoControl function (user mode), or ZwDeviceIoControlFile function (kernel mode). Please refer to Microsoft's documentation for more information.

Applications may use this event to modify the input data (if there are any) before the request continues onward. Applications that choose to do this must do the following:

1. Copy no more than InBufferLength bytes into InBuffer.
2. Update the InBufferValidBytes parameter's value afterward so that it correctly reflects the amount of data in InBuffer.

Alternatively, applications may use this event to handle the request (preventing it from continuing onward), in which case they must do the following:

1. Copy no more than OutBufferLength bytes into OutBuffer.
2. Update the OutBufferValidBytes parameter's value afterward so that it correctly reflects the amount of data in OutBuffer.
3. Set ProcessRequest to False to indicate that the request has been handled and should not continue onward.

(The first two steps are not applicable if the requested operation is not expected to return data.)

Applications need to handle this event only if they have added a standard filter rule that includes [the TBD]. FS_CE_BEFORE_IOCTL flag.

Note: Not everything is possible or allowed in the event handlers. For details, see the Recursive Calls topic.

The FileName parameter reflects the file, directory, or volume targeted by the request.

The IoControlCode parameter reflects the requested I/O control code (IOCTL).

The InBuffer parameter points to a memory buffer that contains the data required to perform the operation. The InBufferLength and InBufferValidBytes parameters reflect the capacity of InBuffer and the length of the data it contains (respectively), in bytes; InBufferValidBytes may be less than InBufferLength (unless the request did not include data, in which case both will be 0).

The OutBuffer parameter points to a memory buffer that receives the data returned by the operation. The OutBufferLength and OutBufferValidBytes parameters reflect the capacity of OutBuffer and the length of the data it contains (respectively), in bytes; OutBufferValidBytes may be less than OutBufferLength (unless the operation is not expected to return data, in which case both will be 0).

Please see the Buffer Parameters topic for more information on how to work with memory buffer event parameters.

The ProcessRequest parameter controls whether the request is sent onward for further processing by subsequent filter drivers and the filesystem; it is True by default.

The FileContext and HandleContext parameters are placeholders for application-defined data associated with the file and specific handle, respectively. Please refer to the Contexts topic for more information.

The ResultCode parameter will always be 0 when the event is fired. If the event cannot be handled in a "successful" manner for some reason (e.g., a resource is not available or security checks failed), set it to a nonzero value to report an appropriate error. Please see the Error Reporting and Handling topic for more information.

This event is fired synchronously; please refer to the Event Types topic for more information.

BeforeLock Event (CBFilter Component)

This event fires before a range of bytes in a file is locked.

Syntax

type TBeforeLockEvent = procedure (
  Sender: TObject;
  const FileName: String;
  var Offset: Int64;
  var Length: Int64;
  Key: Int64;
  var FailImmediately: Boolean;
  var ExclusiveLock: Boolean;
  var FileContext: Pointer;
  var HandleContext: Pointer;
  var ProcessRequest: Boolean;
  var ResultCode: Integer
) of Object;

property OnBeforeLock: TBeforeLockEvent read FOnBeforeLock write FOnBeforeLock;

Remarks

This event fires before a range of bytes in the file specified by FileName is locked; This request is made either by the OS, or on behalf of a user mode application that called the Windows API's LockFile or LockFileEx function.

Applications may use this event to modify the request's parameters.

Applications need to handle this event only if they have added a standard filter rule that includes [the TBD]. FS_CE_BEFORE_LOCK_CONTROL flag.

Note: Not everything is possible or allowed in the event handlers. For details, see the Recursive Calls topic.

The Offset parameter specifies the byte offset where the byte range lock should start.

The Length parameter specifies the length of the byte range lock.

The Key parameter reflects the key that the byte range lock will be associated with. This key is used to identify the byte range lock in later unlock-by-key requests.

The FailImmediately parameter specifies whether the request should fail if the lock cannot be granted immediately.

The ExclusiveLock parameter specifies whether the byte range lock should be exclusive (True) or shared (False).

The FileContext and HandleContext parameters are placeholders for application-defined data associated with the file and specific handle, respectively. Please refer to the Contexts topic for more information.

The ProcessRequest parameter controls whether the request is sent onward for further processing by subsequent filter drivers and the filesystem; it is True by default.

The ResultCode parameter will always be 0 when the event is fired. If the event cannot be handled in a "successful" manner for some reason (e.g., a resource is not available or security checks failed), set it to a nonzero value to report an appropriate error. Please see the Error Reporting and Handling topic for more information.

This event is fired synchronously; please refer to the Event Types topic for more information.

BeforeOpenFile Event (CBFilter Component)

This event fires before a file or directory is opened.

Syntax

type TBeforeOpenFileEvent = procedure (
  Sender: TObject;
  const FileName: String;
  ExistingAttributes: Integer;
  var Isolate: Boolean;
  var BackendFileName: String;
  var DesiredAccess: Integer;
  var Attributes: Integer;
  var ShareMode: Integer;
  var Options: Integer;
  var CreateDisposition: Integer;
  SecurityDescriptor: Pointer;
  Length: Integer;
  var FileContext: Pointer;
  var HandleContext: Pointer;
  var ProcessRequest: Boolean;
  var ResultCode: Integer
) of Object;

property OnBeforeOpenFile: TBeforeOpenFileEvent read FOnBeforeOpenFile write FOnBeforeOpenFile;

Remarks

This event fires before the file or directory specified by FileName is opened. Please refer to the File Create/Open Events topic for more information about how the component determines whether to fire this event or BeforeCreateFile.

Applications may use this event to modify the request's parameters, or to block the request entirely. To do the latter, set ProcessRequest to False; this has the same effect as returning ACCESS_DENIED.

To redirect a request to another file or directory, use the ReparseFileName event, which is fired shortly after this event.

Applications need to handle this event only if they have added a standard filter rule that includes [the TBD]. FS_CE_BEFORE_OPEN flag.

Note: Applications must have the FilterOwnRequests configuration setting enabled if they wish to filter their own file/directory open requests.

Note: Not everything is possible or allowed in the event handlers. For details, see the Recursive Calls topic.

When extended rules are used or the AlwaysRequestAttributesOnOpen configuration setting is enabled, the driver requests attributes of the entity from the filesystem and passes them to ExistingAttributes. If the attributes are not requested, this parameter contains 0.

Isolation-related functionality is under construction.

The initial values of DesiredAccess, Attributes, ShareMode, and CreateDisposition parameters reflect the values that were passed for the similarly named parameters of the Windows API's CreateFile function (or, more accurately, the values carried by the IRP_MJ_CREATE Internet Relay Programming).

DesiredAccess may contain one or more of the following access flags:

Attributes may contain one or more of the following attributes:

ShareMode may contain zero or more of the following share mode flags:

CreateDisposition may contain one of the following values:

Options contains the flags that are described in the CreateOptions parameter of the Native API's ZwCreateFile function. Most of those flags correspond to flags passed in the FlagsAndAttributes parameter of the Windows API's CreateFile function, but some flags are specific to Native API. If you need those flags, check both functions' descriptions.

Please refer to Microsoft's documentation for detailed information about these constants.

To determine whether the request is for a file or a directory, compare Attributes against the FILE_SYS_ATTR_DIRECTORY constant, as follows: // Check whether the request is for a file or a directory. bool isDirectory = Attributes & FILE_SYS_ATTR_DIRECTORY == FILE_SYS_ATTR_DIRECTORY; FILE_SYS_ATTR_DIRECTORY will be present only if it was specified by the calling process; its presence or absence does not indicate the real presence of the attribute on the file or directory on disk.

To determine whether a file will be deleted when its last handle is closed, compare Options against the Windows API's FILE_FLAG_DELETE_ON_CLOSE constant, as follows: // Check whether the file will be deleted on close. bool deleteOnClose = Options & FILE_FLAG_DELETE_ON_CLOSE == FILE_FLAG_DELETE_ON_CLOSE;

Note: Files can be deleted in different ways, so do not use this check to take actions related to tracking file deletion operations. Instead, use the events related to file deletion.

To prevent a file or directory from being opened, set the ResultCode parameter to a non-zero value (typically ERROR_ACCESS_DENIED (5)).

When a file or directory is created using the CreateFile() Windows API function, a caller can specify the security descriptor with the security information. This security information should be applied to a newly created file or directory. The component passes this security information in the SecurityInformation and SecurityDescriptor parameters, when the PassSecurityInFileOpenEvents configuration setting is enabled. If this configuration setting is omitted, the corresponding parameters are empty.

The SecurityInformation parameter reflects which pieces of security information, of those present in SecurityDescriptor, are valid and should have been applied. Please refer to Microsoft's SECURITY_INFORMATION data type documentation for more information about possible values.

The SecurityDescriptor parameter points to a memory buffer that contains the security information. The Length parameter reflects the length of this data, in bytes. Please see the Buffer Parameters topic for more information on how to work with memory buffer event parameters.

The data are formatted as a SECURITY_DESCRIPTOR structure in self-relative format; please refer to the Microsoft's documentation for more information.

If an application needs to alter the security information, it can do this by placing up to Length bytes of information into the SecurityDescriptor buffer.

Note: Changing the security data is possible only when the PassSecurityInFileOpenEvents configuration setting is enabled.

If the capacity reflected by the Length parameter is not enough to accommodate the security information, set LengthNeeded to the number of bytes necessary to hold the data, and return the ERROR_INSUFFICIENT_BUFFER error code via ResultCode.

The ProcessRequest parameter controls whether the request is sent onward for further processing by subsequent filter drivers and the filesystem; it is True by default.

If the Options contains the FILE_FLAG_DELETE_ON_CLOSE flag, the BeforeCanFileBeDeleted event will fire before this event.

If the file is opened with extended attributes passed in the request, the BeforeSetEa event will fire after this event.

The ResultCode parameter will always be 0 when the event is fired. If the event cannot be handled in a "successful" manner for some reason (e.g., a resource is not available or security checks failed), set it to a nonzero value to report an appropriate error. Please see the Error Reporting and Handling topic for more information.

This event is fired synchronously; please refer to the Event Types topic for more information.

BeforeQueryEa Event (CBFilter Component)

This event fires before information about extended attributes of a file is retrieved.

Syntax

type TBeforeQueryEaEvent = procedure (
  Sender: TObject;
  const FileName: String;
  Buffer: Pointer;
  BufferLength: Integer;
  var ReturnSingleEntry: Boolean;
  EaList: Pointer;
  var EaListLength: Integer;
  var EaIndex: Integer;
  var RestartScan: Boolean;
  var LengthReturned: Integer;
  var FileContext: Pointer;
  var HandleContext: Pointer;
  var ProcessRequest: Boolean;
  var ResultCode: Integer
) of Object;

property OnBeforeQueryEa: TBeforeQueryEaEvent read FOnBeforeQueryEa write FOnBeforeQueryEa;

Remarks

This event fires before information about extended attributes of the file specified by FileName is retrieved using the FltQueryEaFile function of the system API.

Applications need to handle this event only if they have added a standard filter rule that includes [the TBD]. FS_CE_BEFORE_QUERY_EA flag.

Note: Not everything is possible or allowed in the event handlers. For details, see the Recursive Calls topic.

The Buffer parameter points to a memory buffer, into which, if the request is successful, the filesystem will place the requested information. The data in the buffer are formatted as a FILE_FULL_EA_INFORMATION structure; please refer to the Microsoft's documentation for more information. The Length parameter reflects the length of this buffer, in bytes. Please see the Buffer Parameters topic for more information on how to work with memory buffer event parameters.

ReturnSingleEntry specifies that the filesystem had to return only the first entry it has found.

EaList is an optional parameter that points to a caller-supplied memory buffer specifying the extended attributes to be queried. The data in the buffer are formatted as a FILE_GET_EA_INFORMATION structure; please refer to the Microsoft's documentation for more information. The EaListLength parameter reflects the length of this data, in bytes. If the caller of the FltQueryEaFile function did not specify any value, it will contain 0. The list may be modified by an event handler, if needed, provided that the size of the new or modified data does not exceed the value of the EaListLength parameter.

EaIndex is an optional parameter that specifies the starting index of the attribute, information about which is requested. This parameter is ignored by the filesystem if EaList points to a nonempty list. If the caller of the FltQueryEaFile function did not specify any value, the parameter will contain -1.

The RestartScan parameter instructs the filesystem to restart enumeration of extended attributes from the first entry. If the parameter is False, retrieval of the extended attributes is resumed by the filesystem after a previous request. The parameter may be modified by an event handler if needed.

LengthReturned is an optional parameter that contains the size, in bytes, of the information, returned in the Buffer.

The FileContext and HandleContext parameters are placeholders for application-defined data associated with the file and specific handle, respectively. Please refer to the Contexts topic for more information.

The ProcessRequest parameter controls whether the request is sent onward for further processing by subsequent filter drivers and the filesystem; it is True by default.

Applications may use this event to modify the request's data before it continues onward, or to handle the request entirely (preventing it from continuing onward). In these cases, applications must do the following:

1. Copy no more than BufferLength bytes into Buffer.
2. Update the LengthReturned parameter's value afterward so that it correctly reflects the amount of data in Buffer.
3. If the request has been handled and should not continue onward, set ProcessRequest to False.

The ResultCode parameter will always be 0 when the event is fired. If the event cannot be handled in a "successful" manner for some reason (e.g., a resource is not available or security checks failed), set it to a nonzero value to report an appropriate error. Please see the Error Reporting and Handling topic for more information.

This event is fired synchronously; please refer to the Event Types topic for more information.

BeforeQueryFileInfo Event (CBFilter Component)

This event fires before information about a file or directory is retrieved.

Syntax

type TBeforeQueryFileInfoEvent = procedure (
  Sender: TObject;
  const FileName: String;
  FileInformationClass: Integer;
  Buffer: Pointer;
  BufferLength: Integer;
  var ValidBytes: Integer;
  var FileContext: Pointer;
  var HandleContext: Pointer;
  var ProcessRequest: Boolean;
  var ResultCode: Integer
) of Object;

property OnBeforeQueryFileInfo: TBeforeQueryFileInfoEvent read FOnBeforeQueryFileInfo write FOnBeforeQueryFileInfo;

Remarks

This event fires before information about the file or directory specified by FileName is retrieved; This event typically fires in response to the Windows API's NtQueryInformationFile function.

Applications need to handle this event only if they have added a standard filter rule that includes [the TBD]. FS_CE_BEFORE_QUERY_FILE_INFO flag.

Note: Not everything is possible or allowed in the event handlers. For details, see the Recursive Calls topic.

The FileInformationClass parameter indicates what kind of file information is requested. Please refer to the NtQueryInformationFile function's documentation for more information about possible values.

The Buffer parameter points to a memory buffer that receives the requested file information. The BufferLength and ValidBytes parameters reflect the capacity of Buffer and the length of the data it contains (respectively), in bytes; ValidBytes may be less than BufferLength. Please see the Buffer Parameters topic for more information on how to work with memory buffer event parameters.

The format of the data is determined by the specified FileInformationClass; please refer to the NtQueryInformationFile function's documentation for more information.

The FileContext and HandleContext parameters are placeholders for application-defined data associated with the file and specific handle, respectively. Please refer to the Contexts topic for more information.

The ProcessRequest parameter controls whether the request is sent onward for further processing by subsequent filter drivers and the filesystem; it is True by default.

Applications may use this event to modify the request's data before it continues onward, or to handle the request entirely (preventing it from continuing onward). In these cases, applications must do the following:

1. Copy no more than BufferLength bytes into Buffer.
2. Update the ValidBytes parameter's value afterward so that it correctly reflects the amount of data in Buffer.
3. If the request has been handled and should not continue onward, set ProcessRequest to False.

The ResultCode parameter will always be 0 when the event is fired. If the event cannot be handled in a "successful" manner for some reason (e.g., a resource is not available or security checks failed), set it to a nonzero value to report an appropriate error. Please see the Error Reporting and Handling topic for more information.

This event is fired synchronously; please refer to the Event Types topic for more information.

BeforeReadFile Event (CBFilter Component)

This event fires before data are read from a file.

Syntax

type TBeforeReadFileEvent = procedure (
  Sender: TObject;
  const FileName: String;
  var Position: Int64;
  Buffer: Pointer;
  BufferLength: Integer;
  var BytesToRead: Integer;
  var Reserved: Integer;
  Direction: Integer;
  var FileContext: Pointer;
  var HandleContext: Pointer;
  var ProcessRequest: Boolean;
  var ResultCode: Integer
) of Object;

property OnBeforeReadFile: TBeforeReadFileEvent read FOnBeforeReadFile write FOnBeforeReadFile;

Remarks

This event fires before data are read from the file specified by FileName.

Applications that intend to modify a file's data after it is read may use this event to modify the request's parameters, if necessary (e.g., to ensure that the correct data are read from the file and made available for postprocessing during the AfterReadFile event). Applications may also use this event to block the request entirely by returning an appropriate error code (e.g., ACCESS_DENIED) via ResultCode.

Alternatively, applications may use this event to handle the underlying request, in which case they must do the following:

1. Enable the ModifiableReadWriteBuffers configuration setting (i.e., before this event fires).
2. Copy no more than BufferLength bytes into Buffer.
3. Update the BytesToRead parameter's value afterward so that it correctly reflects the amount of data in Buffer.
4. Set ProcessRequest to False to indicate that the request has been handled and should not continue onward.

Applications need to handle this event only if they have added a standard filter rule that includes [the TBD]. FS_CE_BEFORE_READ flag.

Note: Not everything is possible or allowed in the event handlers. For details, see the Recursive Calls topic.

The Position parameter specifies the byte offset in the file at which reading should start.

The Buffer parameter points to a memory buffer that receives the data read from the file. The BufferLength parameter reflects the capacity of Buffer, in bytes. Please see the Buffer Parameters topic for more information on how to work with memory buffer event parameters.

The BytesToRead parameter's initial value reflects how many bytes should be read from the file (i.e., how many bytes the requestor expects will be read). This parameter's value may be changed (for either of the reasons discussed above), but it must not exceed BufferLength.

Note: However, reading more or less data than requested is not expected behavior and likely will cause the requestor to misbehave. Applications that change BytesToRead, for any reason, should use the AfterReadFile event to "cover up" such behavior; please refer to its documentation for more information.

The Direction parameter indicates the request direction; please refer to the Cached and Non-Cached Requests topic for more information. Possible values are as follows:

The FileContext and HandleContext parameters are placeholders for application-defined data associated with the file and specific handle, respectively. Please refer to the Contexts topic for more information. (If the system's cache manager or memory manager initiated the operation, HandleContext may be absent, in which case it will be nil.)

The ProcessRequest parameter controls whether the request is sent onward for further processing by subsequent filter drivers and the filesystem; it is True by default.

The ResultCode parameter will always be 0 when the event is fired. If the event cannot be handled in a "successful" manner for some reason (e.g., a resource is not available or security checks failed), set it to a nonzero value to report an appropriate error. Please see the Error Reporting and Handling topic for more information.

This event is fired synchronously; please refer to the Event Types topic for more information.

BeforeRenameOrMoveFile Event (CBFilter Component)

This event fires before a file or directory is renamed or moved.

Syntax

type TBeforeRenameOrMoveFileEvent = procedure (
  Sender: TObject;
  const FileName: String;
  const NewFileName: String;
  var ReplaceIfExists: Boolean;
  var FileContext: Pointer;
  var HandleContext: Pointer;
  var ProcessRequest: Boolean;
  var ResultCode: Integer
) of Object;

property OnBeforeRenameOrMoveFile: TBeforeRenameOrMoveFileEvent read FOnBeforeRenameOrMoveFile write FOnBeforeRenameOrMoveFile;

Remarks

This event fires before the file or directory specified by FileName is renamed or moved to NewFileName.

Applications may use this event to modify the request's parameters, or to block the request entirely. To do the latter, set ProcessRequest to False.

Applications need to handle this event only if they have added a standard filter rule that includes [the TBD]. FS_CE_BEFORE_RENAME flag. A rule's mask is matched against both previous and new filenames, and the event will fire when either of the names matches the mask.

Note: Not everything is possible or allowed in the event handlers. For details, see the Recursive Calls topic.

The ReplaceIfExists parameter specifies what to do if a file with the specified NewFileName already exists. If this parameter is True, the existing file will be overwritten by the file being renamed/moved; if this parameter is False, the operation will fail.

Note: Windows only allows files to be overwritten; if the destination is an existing directory, the request will be denied regardless of this parameter's value.

The FileContext and HandleContext parameters are placeholders for application-defined data associated with the file and specific handle, respectively. Please refer to the Contexts topic for more information.

The ProcessRequest parameter controls whether the request is sent onward for further processing by subsequent filter drivers and the filesystem; it is True by default.

The ResultCode parameter will always be 0 when the event is fired. If the event cannot be handled in a "successful" manner for some reason (e.g., a resource is not available or security checks failed), set it to a nonzero value to report an appropriate error. Please see the Error Reporting and Handling topic for more information.

This event is fired synchronously; please refer to the Event Types topic for more information.

BeforeSetAllocationSize Event (CBFilter Component)

This event fires before a file's allocation size is changed.

Syntax

type TBeforeSetAllocationSizeEvent = procedure (
  Sender: TObject;
  const FileName: String;
  var AllocationSize: Int64;
  var FileContext: Pointer;
  var HandleContext: Pointer;
  var ProcessRequest: Boolean;
  var ResultCode: Integer
) of Object;

property OnBeforeSetAllocationSize: TBeforeSetAllocationSizeEvent read FOnBeforeSetAllocationSize write FOnBeforeSetAllocationSize;

Remarks

This event fires before the allocation size of the file specified by FileName is changed.

Applications may use this event to modify the request's parameters.

Applications need to handle this event only if they have added a standard filter rule that includes [the TBD]. FS_CE_BEFORE_SET_SIZES flag.

Note: Not everything is possible or allowed in the event handlers. For details, see the Recursive Calls topic.

The AllocationSize parameter specifies the new allocation size, in bytes. A file's allocation size is typically larger than its actual size because filesystem operations often reserve space on disk before writing additional data to a file. Applications may track such situations and avoid reallocating disk space where possible to improve performance.

The FileContext and HandleContext parameters are placeholders for application-defined data associated with the file and specific handle, respectively. Please refer to the Contexts topic for more information. (If the system's cache manager or memory manager initiated the operation, HandleContext may be absent, in which case it will be nil.)

The ProcessRequest parameter controls whether the request is sent onward for further processing by subsequent filter drivers and the filesystem; it is True by default.

The ResultCode parameter will always be 0 when the event is fired. If the event cannot be handled in a "successful" manner for some reason (e.g., a resource is not available or security checks failed), set it to a nonzero value to report an appropriate error. Please see the Error Reporting and Handling topic for more information.

This event is fired synchronously; please refer to the Event Types topic for more information.

BeforeSetEa Event (CBFilter Component)

This event fires before extended attributes of a file are changed.

Syntax

type TBeforeSetEaEvent = procedure (
  Sender: TObject;
  const FileName: String;
  Buffer: Pointer;
  BufferLength: Integer;
  var FileContext: Pointer;
  var HandleContext: Pointer;
  var ProcessRequest: Boolean;
  var ResultCode: Integer
) of Object;

property OnBeforeSetEa: TBeforeSetEaEvent read FOnBeforeSetEa write FOnBeforeSetEa;

Remarks

This event fires before extended attributes are changed for the file specified by FileName.

If the file is created or opened with extended attributes passed in the request, this event will fire shortly after the BeforeCreateFile or BeforeOpenFile event.

Applications need to handle this event only if they have added a standard filter rule that includes [the TBD]. FS_CE_BEFORE_SET_EA flag.

Note: Not everything is possible or allowed in the event handlers. For details, see the Recursive Calls topic.

The Buffer parameter points to a memory buffer that specifies the extended attribute information. The buffer referenced by the Buffer parameter may be modified when needed if the request is to be passed further to other filters and the filesystem driver. The Length parameter reflects the length of this buffer, in bytes. Please see the Buffer Parameters topic for more information on how to work with memory buffer event parameters.

The data are formatted as a FILE_FULL_EA_INFORMATION structure; please refer to Microsoft's documentation for more information.

The FileContext and HandleContext parameters are placeholders for application-defined data associated with the file and specific handle, respectively. Please refer to the Contexts topic for more information.

The ProcessRequest parameter controls whether the request is sent onward for further processing by subsequent filter drivers and the filesystem; it is True by default.

The ResultCode parameter will always be 0 when the event is fired. If the event cannot be handled in a "successful" manner for some reason (e.g., a resource is not available or security checks failed), set it to a nonzero value to report an appropriate error. Please see the Error Reporting and Handling topic for more information.

This event is fired synchronously; please refer to the Event Types topic for more information.

BeforeSetFileAttributes Event (CBFilter Component)

This event fires before a file or directory's attributes or times are changed.

Syntax

type TBeforeSetFileAttributesEvent = procedure (
  Sender: TObject;
  const FileName: String;
  var CreationTime: TDateTime;
  var LastAccessTime: TDateTime;
  var LastWriteTime: TDateTime;
  var ChangeTime: TDateTime;
  var Attributes: Integer;
  var FileContext: Pointer;
  var HandleContext: Pointer;
  var ProcessRequest: Boolean;
  var ResultCode: Integer
) of Object;

property OnBeforeSetFileAttributes: TBeforeSetFileAttributesEvent read FOnBeforeSetFileAttributes write FOnBeforeSetFileAttributes;

Remarks

This event fires before the attributes or times of a file or directory specified by FileName are changed.

Applications may use this event to modify the request's parameters.

Applications need to handle this event only if they have added a standard filter rule that includes [the TBD]. FS_CE_BEFORE_SET_ATTRIBUTES flag.

Note: Not everything is possible or allowed in the event handlers. For details, see the Recursive Calls topic.

The CreationTime, LastAccessTime, LastWriteTime, and ChangeTime parameters specify the new time values, specified in UTC. A value of January 1, 1601 00:00:00 UTC indicates that the corresponding time value is not included in the request.

The Attributes parameter specifies the new attributes; please refer to Microsoft's File Attribute Constants article for attribute descriptions.

The FileContext and HandleContext parameters are placeholders for application-defined data associated with the file and specific handle, respectively. Please refer to the Contexts topic for more information.

The ProcessRequest parameter controls whether the request is sent onward for further processing by subsequent filter drivers and the filesystem; it is True by default.

The ResultCode parameter will always be 0 when the event is fired. If the event cannot be handled in a "successful" manner for some reason (e.g., a resource is not available or security checks failed), set it to a nonzero value to report an appropriate error. Please see the Error Reporting and Handling topic for more information.

This event is fired synchronously; please refer to the Event Types topic for more information.

BeforeSetFileInfo Event (CBFilter Component)

This event fires before information about a file or directory is changed.

Syntax

type TBeforeSetFileInfoEvent = procedure (
  Sender: TObject;
  const FileName: String;
  FileInformationClass: Integer;
  Buffer: Pointer;
  BufferLength: Integer;
  var ValidBytes: Integer;
  var FileContext: Pointer;
  var HandleContext: Pointer;
  var ProcessRequest: Boolean;
  var ResultCode: Integer
) of Object;

property OnBeforeSetFileInfo: TBeforeSetFileInfoEvent read FOnBeforeSetFileInfo write FOnBeforeSetFileInfo;

Remarks

This event fires before information about the file or directory specified by FileName is changed; This event typically fires in response to the Windows API's NtSetInformationFile function.

Applications may use this event to modify the request's data before it continues onward, in which case they must do the following:

1. Copy no more than BufferLength bytes into Buffer.
2. Update the ValidBytes parameter's value afterward so that it correctly reflects the amount of data in Buffer.

Alternatively, applications may use this event to handle the underlying request, preventing it from continuing onward, by setting ProcessRequest to False.

Applications need to handle this event only if they have added a standard filter rule that includes [the TBD]. FS_CE_BEFORE_SET_FILE_INFO flag.

Note: Not everything is possible or allowed in the event handlers. For details, see the Recursive Calls topic.

The FileInformationClass parameter indicates what kind of file information is to be changed. Please refer to the NtSetInformationFile function's documentation for more information about possible values.

The Buffer parameter points to a memory buffer that specifies the new file information. The BufferLength and ValidBytes parameters reflect the capacity of Buffer and the length of the data it contains, respectively, in bytes; ValidBytes may be less than BufferLength. Please see the Buffer Parameters topic for more information on how to work with memory buffer event parameters.

The format of the data is determined by the specified FileInformationClass; please refer to the NtSetInformationFile function's documentation for more information.

The FileContext and HandleContext parameters are placeholders for application-defined data associated with the file and specific handle, respectively. Please refer to the Contexts topic for more information.

The ProcessRequest parameter controls whether the request is sent onward for further processing by subsequent filter drivers and the filesystem; it is True by default.

The ResultCode parameter will always be 0 when the event is fired. If the event cannot be handled in a "successful" manner for some reason (e.g., a resource is not available or security checks failed), set it to a nonzero value to report an appropriate error. Please see the Error Reporting and Handling topic for more information.

This event is fired synchronously; please refer to the Event Types topic for more information.

BeforeSetFileSecurity Event (CBFilter Component)

This event fires before a file or directory's security attributes are changed.

Syntax

type TBeforeSetFileSecurityEvent = procedure (
  Sender: TObject;
  const FileName: String;
  SecurityInformation: Integer;
  SecurityDescriptor: Pointer;
  Length: Integer;
  var FileContext: Pointer;
  var HandleContext: Pointer;
  var ProcessRequest: Boolean;
  var ResultCode: Integer
) of Object;

property OnBeforeSetFileSecurity: TBeforeSetFileSecurityEvent read FOnBeforeSetFileSecurity write FOnBeforeSetFileSecurity;

Remarks

This event fires before security attributes are changed for the file or directory specified by FileName.

Applications need to handle this event only if they have added a standard filter rule that includes [the TBD]. FS_CE_BEFORE_SET_SECURITY flag.

Note: Not everything is possible or allowed in the event handlers. For details, see the Recursive Calls topic.

The SecurityInformation parameter reflects which pieces of security information, of those present in SecurityDescriptor, will be set. Please refer to Microsoft's SECURITY_INFORMATION data-type documentation for more information about possible values.

The SecurityDescriptor parameter points to a memory buffer that specifies the new security information. The buffer referenced by the SecurityDescriptor parameter may be modified when needed if the request is to be passed further to other filters and the filesystem driver. The Length parameter reflects the length of this data, in bytes. Please see the Buffer Parameters topic for more information on how to work with memory buffer event parameters.

The data are formatted as a SECURITY_DESCRIPTOR structure in self-relative format; please refer to the Microsoft's documentation for more information.

The FileContext and HandleContext parameters are placeholders for application-defined data associated with the file and specific handle, respectively. Please refer to the Contexts topic for more information.

The ProcessRequest parameter controls whether the request is sent onward for further processing by subsequent filter drivers and the filesystem; it is True by default.

The ResultCode parameter will always be 0 when the event is fired. If the event cannot be handled in a "successful" manner for some reason (e.g., a resource is not available or security checks failed), set it to a nonzero value to report an appropriate error. Please see the Error Reporting and Handling topic for more information.

This event is fired synchronously; please refer to the Event Types topic for more information.

BeforeSetFileSize Event (CBFilter Component)

This event fires before a file is resized.

Syntax

type TBeforeSetFileSizeEvent = procedure (
  Sender: TObject;
  const FileName: String;
  var Size: Int64;
  var FileContext: Pointer;
  var HandleContext: Pointer;
  var ProcessRequest: Boolean;
  var ResultCode: Integer
) of Object;

property OnBeforeSetFileSize: TBeforeSetFileSizeEvent read FOnBeforeSetFileSize write FOnBeforeSetFileSize;

Remarks

This event fires before the file specified by FileName is resized, whether explicitly (e.g., truncation) or implicitly (i.e., as data are appended).

Applications may use this event to modify the request's parameters.

Applications need to handle this event only if they have added a standard filter rule that includes [the TBD]. FS_CE_BEFORE_SET_SIZES flag.

Note: Not everything is possible or allowed in the event handlers. For details, see the Recursive Calls topic.

The Size parameter specifies the new file size, in bytes.

The FileContext and HandleContext parameters are placeholders for application-defined data associated with the file and specific handle, respectively. Please refer to the Contexts topic for more information. (If the system's cache manager or memory manager initiated the operation, HandleContext may be absent, in which case it will be nil.)

The ProcessRequest parameter controls whether the request is sent onward for further processing by subsequent filter drivers and the filesystem; it is True by default.

The ResultCode parameter will always be 0 when the event is fired. If the event cannot be handled in a "successful" manner for some reason (e.g., a resource is not available or security checks failed), set it to a nonzero value to report an appropriate error. Please see the Error Reporting and Handling topic for more information.

This event is fired synchronously; please refer to the Event Types topic for more information.

BeforeSetReparsePoint Event (CBFilter Component)

This event fires when the OS wants to create or update a reparse point on a file or directory.

Syntax

type TBeforeSetReparsePointEvent = procedure (
  Sender: TObject;
  const FileName: String;
  ReparseTag: Int64;
  ReparseBuffer: Pointer;
  BufferLength: Integer;
  var DataLength: Integer;
  var FileContext: Pointer;
  var HandleContext: Pointer;
  var ProcessRequest: Boolean;
  var ResultCode: Integer
) of Object;

property OnBeforeSetReparsePoint: TBeforeSetReparsePointEvent read FOnBeforeSetReparsePoint write FOnBeforeSetReparsePoint;

Remarks

This event fires before the OS creates or updates a reparse point on a file or directory specified by FileName.

Applications need to handle this event only if they have added a standard filter rule that includes [the TBD]. FS_CE_BEFORE_SET_REPARSE_POINT flag.

Note: Not everything is possible or allowed in the event handlers. For details, see the Recursive Calls topic.

The ReparseTag is the reparse tag, which is the value the system uses to identify the format of the reparse point data. This value is also present in the ReparseBuffer data; for convenience, the component extracts it and provides it separately. If the event handler needs to change the reparse tag, it may do so in ReparseBuffer.

The ReparseBuffer parameter points to a memory buffer that specifies the new reparse point information. The buffer referenced by the ReparseBuffer parameter may be modified when needed if the request is to be passed further to other filters and the filesystem driver. The DataLength parameter initially reflects the length of the data contained in the buffer, in bytes. If the event handler updates the data in the ReparseBuffer, it should adjust DataLength to the size of the new data, placed to the buffer. Please see the Buffer Parameters topic for more information on how to work with memory buffer event parameters.

Please refer to the Reparse Points topic for more information.

The FileContext and HandleContext parameters are placeholders for application-defined data associated with the file and specific handle, respectively. Please refer to the Contexts topic for more information.

The ProcessRequest parameter controls whether the request is sent onward for further processing by subsequent filter drivers and the filesystem; it is True by default.

The ResultCode parameter will always be 0 when the event is fired. If the event cannot be handled in a "successful" manner for some reason (e.g., a resource is not available or security checks failed), set it to a nonzero value to report an appropriate error. Please see the Error Reporting and Handling topic for more information.

This event is fired synchronously; please refer to the Event Types topic for more information.

BeforeUnlockAll Event (CBFilter Component)

This event fires before all locked byte ranges in a file are unlocked.

Syntax

type TBeforeUnlockAllEvent = procedure (
  Sender: TObject;
  const FileName: String;
  var FileContext: Pointer;
  var HandleContext: Pointer;
  var ProcessRequest: Boolean;
  var ResultCode: Integer
) of Object;

property OnBeforeUnlockAll: TBeforeUnlockAllEvent read FOnBeforeUnlockAll write FOnBeforeUnlockAll;

Remarks

This event fires before all locked byte ranges in the file specified by FileName are unlocked.

Applications need to handle this event only if they have added a standard filter rule that includes [the TBD]. FS_CE_BEFORE_LOCK_CONTROL flag.

Note: Not everything is possible or allowed in the event handlers. For details, see the Recursive Calls topic.

The FileContext and HandleContext parameters are placeholders for application-defined data associated with the file and specific handle, respectively. Please refer to the Contexts topic for more information.

The ProcessRequest parameter controls whether the request is sent onward for further processing by subsequent filter drivers and the filesystem; it is True by default.

The ResultCode parameter will always be 0 when the event is fired. If the event cannot be handled in a "successful" manner for some reason (e.g., a resource is not available or security checks failed), set it to a nonzero value to report an appropriate error. Please see the Error Reporting and Handling topic for more information.

This event is fired synchronously; please refer to the Event Types topic for more information.

BeforeUnlockAllByKey Event (CBFilter Component)

This event fires before all locked byte ranges in a file, associated with a particular key, are unlocked.

Syntax

type TBeforeUnlockAllByKeyEvent = procedure (
  Sender: TObject;
  const FileName: String;
  Key: Int64;
  var FileContext: Pointer;
  var HandleContext: Pointer;
  var ProcessRequest: Boolean;
  var ResultCode: Integer
) of Object;

property OnBeforeUnlockAllByKey: TBeforeUnlockAllByKeyEvent read FOnBeforeUnlockAllByKey write FOnBeforeUnlockAllByKey;

Remarks

This event fires before all locked byte ranges in the file specified by FileName, and associated with the specified Key, are unlocked.

Applications need to handle this event only if they have added a standard filter rule that includes [the TBD]. FS_CE_BEFORE_LOCK_CONTROL flag.

Note: Not everything is possible or allowed in the event handlers. For details, see the Recursive Calls topic.

The Key parameter contains the key value specified when the byte ranges were locked. Please refer to the BeforeLock event's documentation for more information.

The FileContext and HandleContext parameters are placeholders for application-defined data associated with the file and specific handle, respectively. Please refer to the Contexts topic for more information.

The ProcessRequest parameter controls whether the request is sent onward for further processing by subsequent filter drivers and the filesystem; it is True by default.

The ResultCode parameter will always be 0 when the event is fired. If the event cannot be handled in a "successful" manner for some reason (e.g., a resource is not available or security checks failed), set it to a nonzero value to report an appropriate error. Please see the Error Reporting and Handling topic for more information.

This event is fired synchronously; please refer to the Event Types topic for more information.

BeforeUnlockSingle Event (CBFilter Component)

This event fires before a particular locked byte range in a file is unlocked.

Syntax

type TBeforeUnlockSingleEvent = procedure (
  Sender: TObject;
  const FileName: String;
  var Offset: Int64;
  var Length: Int64;
  Key: Int64;
  var FileContext: Pointer;
  var HandleContext: Pointer;
  var ProcessRequest: Boolean;
  var ResultCode: Integer
) of Object;

property OnBeforeUnlockSingle: TBeforeUnlockSingleEvent read FOnBeforeUnlockSingle write FOnBeforeUnlockSingle;

Remarks

This event fires before a particular locked byte range in the file specified by FileName is unlocked.

Applications may use this event to modify the request's parameters.

Applications need to handle this event only if they have added a standard filter rule that includes [the TBD]. FS_CE_BEFORE_LOCK_CONTROL flag.

Note: Not everything is possible or allowed in the event handlers. For details, see the Recursive Calls topic.

The Offset, Length, and Key parameters contain the starting byte offset, length, and key values, respectively, specified when the byte range was locked. Please refer to the BeforeLock event's documentation for more information.

The FileContext and HandleContext parameters are placeholders for application-defined data associated with the file and specific handle, respectively. Please refer to the Contexts topic for more information.

The ProcessRequest parameter controls whether the request is sent onward for further processing by subsequent filter drivers and the filesystem; it is True by default.

The ResultCode parameter will always be 0 when the event is fired. If the event cannot be handled in a "successful" manner for some reason (e.g., a resource is not available or security checks failed), set it to a nonzero value to report an appropriate error. Please see the Error Reporting and Handling topic for more information.

This event is fired synchronously; please refer to the Event Types topic for more information.

BeforeWriteFile Event (CBFilter Component)

This event fires before data are written to a file.

Syntax

type TBeforeWriteFileEvent = procedure (
  Sender: TObject;
  const FileName: String;
  var Position: Int64;
  Buffer: Pointer;
  BufferLength: Integer;
  var BytesToWrite: Integer;
  var Reserved: Integer;
  Direction: Integer;
  var FileContext: Pointer;
  var HandleContext: Pointer;
  var ProcessRequest: Boolean;
  var ResultCode: Integer
) of Object;

property OnBeforeWriteFile: TBeforeWriteFileEvent read FOnBeforeWriteFile write FOnBeforeWriteFile;

Remarks

This event fires before data are written to the file specified by FileName.

Applications may use this event to modify the request's parameters or data. Applications that choose to modify the request's data must do the following:

1. Enable the ModifiableReadWriteBuffers configuration setting (i.e., before this event fires).
2. Copy no more than BufferLength bytes into Buffer.
3. Update the BytesToWrite parameter's value afterward so that it correctly reflects the amount of data in Buffer.

Applications may also use this event to block the request entirely by returning an appropriate error code (e.g., ACCESS_DENIED) via ResultCode.

Alternatively, applications may use this event to handle the underlying request, in which case they must do the following:

1. Write the data pointed to by Buffer to the desired location (after preprocessing it, if necessary).
2. Update the BytesToWrite parameter's value afterward so that it correctly reflects the amount of data that were written.
3. Set ProcessRequest to False to indicate that the request has been handled and should not continue onward.

Applications need to handle this event only if they have added a standard filter rule that includes [the TBD]. FS_CE_BEFORE_WRITE flag.

Note: Not everything is possible or allowed in the event handlers. For details, see the Recursive Calls topic.

The Position parameter specifies the byte offset in the file at which writing should start. A value of -1 means "append to the end of the file".

The Buffer parameter points to a memory buffer that contains the data to write to the file. The BufferLength parameter reflects the capacity of Buffer, in bytes. Please see the Buffer Parameters topic for more information on how to work with memory buffer event parameters.

The BytesToWrite parameter's initial value reflects how many bytes should be written to the file (i.e., how many bytes the requestor expects will be written). This parameter's value may be changed (for either of the reasons discussed above), but it must not exceed BufferLength.

Note: However, writing more or less data than requested is not expected behavior and likely will cause the requestor to misbehave. Applications that change BytesToWrite, for any reason, should use the AfterWriteFile event to "cover up" such behavior; please refer to its documentation for more information.

The Direction parameter indicates the request direction; please refer to the Cached and Non-Cached Requests topic for more information. Possible values are as follows:

The FileContext and HandleContext parameters are placeholders for application-defined data associated with the file and specific handle, respectively. Please refer to the Contexts topic for more information. (If the system's cache manager or memory manager initiated the operation, HandleContext may be absent, in which case it will be nil.)

The ProcessRequest parameter controls whether the request is sent onward for further processing by subsequent filter drivers and the filesystem; it is True by default.

The ResultCode parameter will always be 0 when the event is fired. If the event cannot be handled in a "successful" manner for some reason (e.g., a resource is not available or security checks failed), set it to a nonzero value to report an appropriate error. Please see the Error Reporting and Handling topic for more information.

This event is fired synchronously; please refer to the Event Types topic for more information.

CleanupContext Event (CBFilter Component)

This event fires when the application-defined data stored in one or more contexts need to be cleaned up.

Syntax

type TCleanupContextEvent = procedure (
  Sender: TObject;
  FileContext: Pointer;
  HandleContext: Pointer;
  var ResultCode: Integer
) of Object;

property OnCleanupContext: TCleanupContextEvent read FOnCleanupContext write FOnCleanupContext;

Remarks

This event fires after a file or directory is closed, just before any contexts related to it are discarded, giving applications a chance to clean up any information stored in them.

The FileContext and HandleContext parameters are placeholders for application-defined data associated with the file and specific handle, respectively. Please refer to the Contexts topic for more information.

When a handle to some file or directory is closed, this event will fire if the HandleContext associated with that handle is not nil. When the last handle to the file or directory is closed, this event will fire if the HandleContext associated with that handle or the FileContext associated with that file or directory is not nil. After this event fires, the applicable contexts are set back to nil automatically.

Applications that need to know the name of the file or directory this event is firing for should store a copy of that name in the context during an earlier event.

This event is optional; it will fire regardless of whether any filter rules are present, but only if FileContext, HandleContext, or both, are not already nil. Applications that clean up their contexts (and set them back to nil) when a file is being closed, or earlier, do not need to handle this event.

The ResultCode parameter will always be 0 when the event is fired. If the event cannot be handled in a "successful" manner for some reason (e.g., a resource is not available or security checks failed), set it to a nonzero value to report an appropriate error. Please see the Error Reporting and Handling topic for more information.

This event is fired synchronously; please refer to the Event Types topic for more information.

Error Event (CBFilter Component)

This event fires if an unhandled error occurs during an event.

Syntax

type TErrorEvent = procedure (
  Sender: TObject;
  ErrorCode: Integer;
  const Description: String
) of Object;

property OnError: TErrorEvent read FOnError write FOnError;

Remarks

This event fires if an unhandled error occurs during another event. Developers can use this information to track down unhandled errors in an application's event handlers.

Note: Not everything is possible or allowed in the event handlers. For details, see the Recursive Calls topic.

FilterStart Event (CBFilter Component)

This event fires once the filter has attached and filtering has started.

Syntax

type TFilterStartEvent = procedure (
  Sender: TObject;
  var ResultCode: Integer
) of Object;

property OnFilterStart: TFilterStartEvent read FOnFilterStart write FOnFilterStart;

Remarks

This event fires once the filter has attached and filtering has started; please refer to the StartFilter method for more information.

The ResultCode parameter will always be 0 when the event is fired. If the event cannot be handled in a "successful" manner for some reason (e.g., a resource is not available or security checks failed), set it to a nonzero value to report an appropriate error. Please see the Error Reporting and Handling topic for more information.

This event is fired synchronously; please refer to the Event Types topic for more information.

FilterStop Event (CBFilter Component)

This event fires once filtering has stopped and the filter has detached.

Syntax

type TFilterStopEvent = procedure (
  Sender: TObject;
  var ResultCode: Integer
) of Object;

property OnFilterStop: TFilterStopEvent read FOnFilterStop write FOnFilterStop;

Remarks

This event fires once filtering has stopped and the filter has detached.

The ResultCode parameter will always be 0 when the event is fired. If the event cannot be handled in a "successful" manner for some reason, set it to a non-zero value to report an appropriate error.

Note: This event fires after the operation has already completed, so reporting an error will not actually affect the operation itself. Please refer to the Error Reporting and Handling topic for more information.

This event is fired synchronously; please refer to the Event Types topic for more information.

NotifyCanFileBeDeleted Event (CBFilter Component)

This event fires when the OS marks a file or directory for deletion or removes such a mark.

Syntax

type TNotifyCanFileBeDeletedEvent = procedure (
  Sender: TObject;
  const FileName: String;
  RequestType: Integer;
  CanDelete: Boolean;
  Status: Integer;
  var ResultCode: Integer
) of Object;

property OnNotifyCanFileBeDeleted: TNotifyCanFileBeDeletedEvent read FOnNotifyCanFileBeDeleted write FOnNotifyCanFileBeDeleted;

Remarks

This event fires when the OS marks the file or directory specified by FileName for deletion or removes such a mark.

Files and directories can be deleted in two ways: (1) a file or directory can be opened with the FILE_FLAG_DELETE_ON_CLOSE flag, or (2) some process may call Windows API's NtSetInformationFile function with FILE_DISPOSITION_INFORMATION or FILE_DISPOSITION_INFORMATION_EX structure as a parameter.

If the file or directory is created or opened with the FILE_FLAG_DELETE_ON_CLOSE flag, this event is fired shortly after the NotifyCreateFile or NotifyOpenFile event.

Applications need to handle this event only if they have added a standard filter rule that includes [the TBD]. FS_NE_CAN_DELETE flag.

The RequestType indicates which kind of system request resulted in firing this event. It can be one of the following:

The CanDelete parameter reflects whether or not the file or directory can be deleted.

The Status parameter contains an NT status code that indicates the outcome of the operation; 0 indicates success. To convert this value to a Win32 error code, call the NtStatusToWin32Error method.

Note: This event will not fire for failed requests unless the ProcessFailedRequests property is enabled.

The ResultCode parameter will always be 0 when the event is fired. If the event cannot be handled in a "successful" manner for some reason, set it to a non-zero value to report an appropriate error.

Note: This event fires after the operation has already completed, so reporting an error will not actually affect the operation itself. Please refer to the Error Reporting and Handling topic for more information.

This event is fired asynchronously; please refer to the Event Types topic for more information.

NotifyCleanupFile Event (CBFilter Component)

This event fires when a file or directory handle has been closed.

Syntax

type TNotifyCleanupFileEvent = procedure (
  Sender: TObject;
  const FileName: String;
  var ResultCode: Integer
) of Object;

property OnNotifyCleanupFile: TNotifyCleanupFileEvent read FOnNotifyCleanupFile write FOnNotifyCleanupFile;

Remarks

This event fires when a handle to the file or directory specified by FileName has been closed. This event differs from NotifyCloseFile in that NotifyCleanupFile fires when an open handle to the specified file or directory is closed by a process, whereas NotifyCloseFile may be fired much later when the OS itself decides that the file or directory can be formally closed.

Other events may fire for the file or directory in the time between when this event fires and when the NotifyCloseFile event fires. For example, system components, such as the memory manager or cache manager, may cause the NotifyReadFile and NotifyWriteFile events to fire.

Applications need to handle this event only if they have added a standard filter rule that includes [the TBD]. FS_NE_CLEANUP flag.

The ResultCode parameter will always be 0 when the event is fired. If the event cannot be handled in a "successful" manner for some reason, set it to a non-zero value to report an appropriate error.

Note: This event fires after the operation has already completed, so reporting an error will not actually affect the operation itself. Please refer to the Error Reporting and Handling topic for more information.

This event is fired asynchronously; please refer to the Event Types topic for more information.

NotifyCloseFile Event (CBFilter Component)

This event fires when a file or directory has been closed.

Syntax

type TNotifyCloseFileEvent = procedure (
  Sender: TObject;
  const FileName: String;
  var ResultCode: Integer
) of Object;

property OnNotifyCloseFile: TNotifyCloseFileEvent read FOnNotifyCloseFile write FOnNotifyCloseFile;

Remarks

This event fires when the file or directory specified by FileName has been closed.

Applications need to handle this event only if they have added a standard filter rule that includes [the TBD]. FS_NE_CLOSE flag.

If the file or directory was marked for deletion earlier, the NotifyDeleteFile will fire shortly before this event.

The ResultCode parameter will always be 0 when the event is fired. If the event cannot be handled in a "successful" manner for some reason, set it to a non-zero value to report an appropriate error.

Note: This event fires after the operation has already completed, so reporting an error will not actually affect the operation itself. Please refer to the Error Reporting and Handling topic for more information.

This event is fired asynchronously; please refer to the Event Types topic for more information.

NotifyCreateFile Event (CBFilter Component)

This event fires when a file or directory has been created.

Syntax

type TNotifyCreateFileEvent = procedure (
  Sender: TObject;
  const FileName: String;
  ExistingAttributes: Integer;
  DesiredAccess: Integer;
  Attributes: Integer;
  ShareMode: Integer;
  Options: Integer;
  CreateDisposition: Integer;
  SecurityDescriptor: Pointer;
  Length: Integer;
  Status: Integer;
  var ResultCode: Integer
) of Object;

property OnNotifyCreateFile: TNotifyCreateFileEvent read FOnNotifyCreateFile write FOnNotifyCreateFile;

Remarks

This event fires when the file or directory specified by FileName has been created. Please refer to the File Create/Open Events topic for more information about how the component determines whether to fire this event or NotifyOpenFile.

Applications need to handle this event only if they have added a standard filter rule that includes [the TBD]. FS_NE_CREATE flag.

Note: Applications must have the FilterOwnRequests configuration setting enabled if they wish to filter their own file/directory creation requests.

When extended rules are used or the AlwaysRequestAttributesOnOpen configuration setting is enabled, the driver requests attributes of the entity from the filesystem and passes them to ExistingAttributes. If the attributes are not requested, this parameter contains 0.

The DesiredAccess, Attributes, ShareMode, and CreateDisposition parameters reflect the values that were passed for the similarly named parameters of the Windows API's CreateFile function (or, more accurately, the values carried by the IRP_MJ_CREATE IRP).

DesiredAccess may contain one or more of the following access flags:

Attributes may contain one or more of the following attributes:

ShareMode may contain zero or more of the following share mode flags:

CreateDisposition may contain one of the following values:

Options contains the flags that are described in the CreateOptions parameter of the native API's ZwCreateFile function. Most of those flags correspond to flags passed in the FlagsAndAttributes parameter of the Windows API's CreateFile function, but some flags are specific to the native API. If you need those flags, check both functions' descriptions.

Please refer to Microsoft's documentation for detailed information about these constants.

To determine whether the request was for a file or a directory, compare Attributes against the FILE_SYS_ATTR_DIRECTORY constant, as follows: // Check whether the request is for a file or a directory. bool isDirectory = Attributes & FILE_SYS_ATTR_DIRECTORY == FILE_SYS_ATTR_DIRECTORY; FILE_SYS_ATTR_DIRECTORY will be present if it was specified by the calling process or if the existing filesystem entry is a directory.

To determine whether a file will be deleted when its last handle is closed, compare Options against the Windows API's FILE_FLAG_DELETE_ON_CLOSE constant, as follows: // Check whether the file will be deleted on close. bool deleteOnClose = Options & FILE_FLAG_DELETE_ON_CLOSE == FILE_FLAG_DELETE_ON_CLOSE; Note: Because files can be deleted in different ways, do not use this check to take actions related to tracking file deletion operations. Instead, use the events related to file deletion.

When a file or directory is created using the CreateFile() Windows API function, a caller can specify the security descriptor with the security information. This security information should be applied to a newly created file or directory. The component passes this security information in the SecurityInformation and SecurityDescriptor parameters, when the PassSecurityInFileOpenEvents configuration setting is enabled. If this configuration setting is omitted, the corresponding parameters are empty.

The SecurityInformation parameter reflects which pieces of security information, of those present in SecurityDescriptor, are valid and should have been applied. Please refer to Microsoft's SECURITY_INFORMATION data type documentation for more information about possible values.

The SecurityDescriptor parameter points to a memory buffer that contains the security information. The Length parameter reflects the length of this data, in bytes. Please see the Buffer Parameters topic for more information on how to work with memory buffer event parameters.

The data are formatted as a SECURITY_DESCRIPTOR structure in self-relative format; please refer to the Microsoft's documentation for more information.

If the Options contains the FILE_FLAG_DELETE_ON_CLOSE flag, the NotifyCanFileBeDeleted event will fire after this event.

If the file is created with extended attributes passed in the request, the NotifySetEa event will fire after this event.

The Status parameter contains an NT status code that indicates the outcome of the operation; 0 indicates success. To convert this value to a Win32 error code, call the NtStatusToWin32Error method.

Note: This event will not fire for failed requests unless the ProcessFailedRequests property is enabled.

The ResultCode parameter will always be 0 when the event is fired. If the event cannot be handled in a "successful" manner for some reason, set it to a non-zero value to report an appropriate error.

Note: This event fires after the operation has already completed, so reporting an error will not actually affect the operation itself. Please refer to the Error Reporting and Handling topic for more information.

This event is fired asynchronously; please refer to the Event Types topic for more information.

NotifyCreateHardLink Event (CBFilter Component)

This event fires when a hard link has been created.

Syntax

type TNotifyCreateHardLinkEvent = procedure (
  Sender: TObject;
  const FileName: String;
  const LinkName: String;
  Status: Integer;
  var ResultCode: Integer
) of Object;

property OnNotifyCreateHardLink: TNotifyCreateHardLinkEvent read FOnNotifyCreateHardLink write FOnNotifyCreateHardLink;

Remarks

This event fires when a hard link to the file specified by FileName has been created. Please refer to Microsoft's Hard Links article for more information about hard links.

Applications need to handle this event only if they have added a standard filter rule that includes [the TBD]. FS_NE_CREATE_HARD_LINK flag.

The LinkName parameter reflects the name of the created hard link.

The Status parameter contains an NT status code that indicates the outcome of the operation; 0 indicates success. To convert this value to a Win32 error code, call the NtStatusToWin32Error method.

Note: This event will not fire for failed requests unless the ProcessFailedRequests property is enabled.

The ResultCode parameter will always be 0 when the event is fired. If the event cannot be handled in a "successful" manner for some reason, set it to a non-zero value to report an appropriate error.

Note: This event fires after the operation has already completed, so reporting an error will not actually affect the operation itself. Please refer to the Error Reporting and Handling topic for more information.

This event is fired asynchronously; please refer to the Event Types topic for more information.

NotifyDeleteFile Event (CBFilter Component)

This event fires when a file or directory has been deleted.

Syntax

type TNotifyDeleteFileEvent = procedure (
  Sender: TObject;
  const FileName: String;
  RequestType: Integer;
  var ResultCode: Integer
) of Object;

property OnNotifyDeleteFile: TNotifyDeleteFileEvent read FOnNotifyDeleteFile write FOnNotifyDeleteFile;

Remarks

This event fires when the file or directory specified by FileName has been deleted. More specifically, this event is queued for delivery after the final IRP_MJ_CLOSE I/O request packet (IRP) has been processed by the filesystem (i.e., after the last handle to the file or directory is closed and the file or directory is gone) and before NotifyCloseFile is queued.

Applications need to handle this event only if they have added a standard filter rule that includes [the TBD]. FS_NE_DELETE flag.

The RequestType indicates which kind of system request resulted in firing this event. It can be one of the following:

The ResultCode parameter will always be 0 when the event is fired. If the event cannot be handled in a "successful" manner for some reason, set it to a non-zero value to report an appropriate error.

Note: This event fires after the operation has already completed, so reporting an error will not actually affect the operation itself. Please refer to the Error Reporting and Handling topic for more information.

This event is fired asynchronously; please refer to the Event Types topic for more information.

NotifyDeleteReparsePoint Event (CBFilter Component)

This event fires when a file or directory's reparse point has been deleted.

Syntax

type TNotifyDeleteReparsePointEvent = procedure (
  Sender: TObject;
  const FileName: String;
  Status: Integer;
  var ResultCode: Integer
) of Object;

property OnNotifyDeleteReparsePoint: TNotifyDeleteReparsePointEvent read FOnNotifyDeleteReparsePoint write FOnNotifyDeleteReparsePoint;

Remarks

This event fires when a reparse point has been deleted from the file or directory specified by FileName.

Note: The file or directory was not deleted, only a reparse point was.

Applications need to handle this event only if they have added a standard filter rule that includes [the TBD]. FS_NE_DELETE_REPARSE_POINT flag.

The Status parameter contains an NT status code that indicates the outcome of the operation; 0 indicates success. To convert this value to a Win32 error code, call the NtStatusToWin32Error method.

Note: This event will not fire for failed requests unless the ProcessFailedRequests property is enabled.

The ResultCode parameter will always be 0 when the event is fired. If the event cannot be handled in a "successful" manner for some reason, set it to a non-zero value to report an appropriate error.

Note: This event fires after the operation has already completed, so reporting an error will not actually affect the operation itself. Please refer to the Error Reporting and Handling topic for more information.

This event is fired asynchronously; please refer to the Event Types topic for more information.

NotifyEnumerateDirectory Event (CBFilter Component)

This event fires when a directory entry has been returned during directory enumeration.

Syntax

type TNotifyEnumerateDirectoryEvent = procedure (
  Sender: TObject;
  const DirectoryName: String;
  Flags: Integer;
  Index: Integer;
  const FileName: String;
  CreationTime: TDateTime;
  LastAccessTime: TDateTime;
  LastWriteTime: TDateTime;
  ChangeTime: TDateTime;
  Size: Int64;
  AllocationSize: Int64;
  FileId: Int64;
  Attributes: Integer;
  Status: Integer;
  var ResultCode: Integer
) of Object;

property OnNotifyEnumerateDirectory: TNotifyEnumerateDirectoryEvent read FOnNotifyEnumerateDirectory write FOnNotifyEnumerateDirectory;

Remarks

This event fires when a directory entry (i.e., file or subdirectory) has been returned during enumeration of the directory specified by DirectoryName.

Applications need to handle this event only if they have added a standard filter rule that includes [the TBD]. FS_NE_ENUMERATE_DIRECTORY flag.

The Flags parameter specifies supplementary information about enumeration. It is a combination of zero or more values:

If the Flags parameter contains FS_ENUM_INDEX_SPECIFIED, the Index parameter contains the index as provided by the OS.

The FileName parameter reflects the name of the directory entry.

The CreationTime, LastAccessTime, LastWriteTime, and ChangeTime parameters reflect the entry's time values, specified in UTC.

The Size parameter reflects the size of the file, in bytes; it is always 0 for subdirectories.

The AllocationSize parameter reflects the amount of space allocated for the file, in bytes; it is always 0 for subdirectories.

The FileId parameter reflects the unique Id of the entry, as reported by the filesystem. This Id is used by the network redirector, and some third-party applications, to open files and directories by Id instead of by name. The root directory always uses the predefined Id 0x7FFFFFFFFFFFFFFF.

The Attributes parameter reflects the entry's attributes; please refer to Microsoft's File Attribute Constants article for attribute descriptions.

The Status parameter contains an NT status code that indicates the outcome of the operation; 0 indicates success. To convert this value to a Win32 error code, call the NtStatusToWin32Error method.

Note: This event will not fire for failed requests unless the ProcessFailedRequests property is enabled.

The ResultCode parameter will always be 0 when the event is fired. If the event cannot be handled in a "successful" manner for some reason, set it to a non-zero value to report an appropriate error.

Note: This event fires after the operation has already completed, so reporting an error will not actually affect the operation itself. Please refer to the Error Reporting and Handling topic for more information.

This event is fired asynchronously; please refer to the Event Types topic for more information.

NotifyFilterAttachToVolume Event (CBFilter Component)

This event fires when the filter has been attached to a newly mounted filesystem volume.

Syntax

type TNotifyFilterAttachToVolumeEvent = procedure (
  Sender: TObject;
  const VolumeName: String;
  var ResultCode: Integer
) of Object;

property OnNotifyFilterAttachToVolume: TNotifyFilterAttachToVolumeEvent read FOnNotifyFilterAttachToVolume write FOnNotifyFilterAttachToVolume;

Remarks

This event fires when the filter has been attached to the newly mounted filesystem volume specified by VolumeName. Please refer to the FireVolumeEvents property for more information.

Applications need to handle this event only if the FireVolumeEvents property includes the FS_MOUNT_NOTIFY flag.

Note: This event won't fire for any volumes skipped during the BeforeFilterAttachToVolume event; please refer to its documentation for more information.

Applications that use volume-specific rules should typically add such rules during the AfterFilterAttachToVolume event, which is fired synchronously, rather than this one.

The format of the VolumeName parameter's value depends on whether the ResolveNtDeviceToDriveLetter configuration setting is enabled; please refer to its documentation for more information. Applications can obtain additional information about a volume by retrieving its GUID using the GetVolumeGUID method, and then using that GUID to call various Windows API functions.

The ResultCode parameter will always be 0 when the event is fired. If the event cannot be handled in a "successful" manner for some reason, set it to a non-zero value to report an appropriate error.

Note: This event fires after the operation has already completed, so reporting an error will not actually affect the operation itself. Please refer to the Error Reporting and Handling topic for more information.

This event is fired asynchronously; please refer to the Event Types topic for more information.

Applications must be aware that this event fires as a direct response to a filesystem state change (mount or unmount). Various system components or third-party actors can perform supplementary filesystem mounting and unmounting during main unmount operations (e.g., Volume Service is one such component). This can cause seemingly excessive events to be fired, and sometimes they can be fired out of order (such as two *Attach or *Detach events fired in a row).

NotifyFilterDetachFromVolume Event (CBFilter Component)

This event fires when the filter has been detached from a filesystem volume.

Syntax

type TNotifyFilterDetachFromVolumeEvent = procedure (
  Sender: TObject;
  const VolumeName: String;
  var ResultCode: Integer
) of Object;

property OnNotifyFilterDetachFromVolume: TNotifyFilterDetachFromVolumeEvent read FOnNotifyFilterDetachFromVolume write FOnNotifyFilterDetachFromVolume;

Remarks

This event fires when the filter has been detached from the filesystem volume specified by VolumeName, typically as a result of the volume being unmounted. Please refer to the FireVolumeEvents property for more information.

Applications need to handle this event only if the FireVolumeEvents property includes the FS_MOUNT_NOTIFY flag.

Note: This event won't fire for any volumes skipped during the BeforeFilterAttachToVolume event; please refer to its documentation for more information.

Applications that use volume-specific rules typically should remove such rules during the AfterFilterDetachFromVolume event, which is fired synchronously, rather than this one.

The format of the VolumeName parameter's value depends on whether the ResolveNtDeviceToDriveLetter configuration setting is enabled; please refer to its documentation for more information. Applications can obtain additional information about a volume by retrieving its GUID using the GetVolumeGUID method, and then using that GUID to call various Windows API functions.

The ResultCode parameter will always be 0 when the event is fired. If the event cannot be handled in a "successful" manner for some reason, set it to a non-zero value to report an appropriate error.

Note: This event fires after the operation has already completed, so reporting an error will not actually affect the operation itself. Please refer to the Error Reporting and Handling topic for more information.

This event is fired asynchronously; please refer to the Event Types topic for more information.

Applications must be aware that this event fires as a direct response to a filesystem state change (mount or unmount). Various system components or third-party actors can perform supplementary filesystem mounting and unmounting during main unmount operations (e.g., Volume Service is one such component). This can cause seemingly excessive events to be fired, and sometimes they can be fired out of order (such as two *Attach or *Detach events fired in a row).

NotifyFsctl Event (CBFilter Component)

This event fires when an IRP_MJ_FILE_SYSTEM_CONTROL operation has occurred.

Syntax

type TNotifyFsctlEvent = procedure (
  Sender: TObject;
  const FileName: String;
  FsControlCode: Integer;
  InBuffer: Pointer;
  InBufferLength: Integer;
  InBufferValidBytes: Integer;
  OutBuffer: Pointer;
  OutBufferLength: Integer;
  OutBufferValidBytes: Integer;
  Status: Integer;
  var ResultCode: Integer
) of Object;

property OnNotifyFsctl: TNotifyFsctlEvent read FOnNotifyFsctl write FOnNotifyFsctl;

Remarks

This event fires when an IRP_MJ_FILE_SYSTEM_CONTROL (FSCTL) operation has occurred. Such requests are sent using the Windows API's DeviceIoControl function (user mode), or ZwFsControlFile function (kernel mode); please refer to Microsoft's documentation for more information.

Applications need to handle this event only if they have added a standard filter rule that includes [the TBD]. FS_NE_FSCTL flag.

The FileName parameter reflects the file, directory, or volume targeted by the request.

The FsControlCode parameter reflects the requested filesystem control code (FSCTL).

The InBuffer parameter points to a memory buffer that contains the data required to perform the operation. The InBufferLength and InBufferValidBytes parameters reflect the capacity of InBuffer and the length of the data it contains (respectively), in bytes; InBufferValidBytes may be less than InBufferLength (unless the request did not include data, in which case both will be 0).

The OutBuffer parameter points to a memory buffer that contains the data returned by the operation. The OutBufferLength and OutBufferValidBytes parameters reflect the capacity of OutBuffer and the length of the data it contains (respectively), in bytes; OutBufferValidBytes may be less than OutBufferLength (unless the operation did not return data, in which case both will be 0).

Please see the Buffer Parameters topic for more information on how to work with memory buffer event parameters.

The Status parameter contains an NT status code that indicates the outcome of the operation; 0 indicates success. To convert this value to a Win32 error code, call the NtStatusToWin32Error method.

Note: This event will not fire for failed requests unless the ProcessFailedRequests property is enabled.

The ResultCode parameter will always be 0 when the event is fired. If the event cannot be handled in a "successful" manner for some reason, set it to a non-zero value to report an appropriate error.

Note: This event fires after the operation has already completed, so reporting an error will not actually affect the operation itself. Please refer to the Error Reporting and Handling topic for more information.

This event is fired asynchronously; please refer to the Event Types topic for more information.

NotifyGetFileSecurity Event (CBFilter Component)

This event fires when a file or directory's security attributes have been retrieved.

Syntax

type TNotifyGetFileSecurityEvent = procedure (
  Sender: TObject;
  const FileName: String;
  SecurityInformation: Integer;
  SecurityDescriptor: Pointer;
  Length: Integer;
  Status: Integer;
  var ResultCode: Integer
) of Object;

property OnNotifyGetFileSecurity: TNotifyGetFileSecurityEvent read FOnNotifyGetFileSecurity write FOnNotifyGetFileSecurity;

Remarks

This event fires when security attributes have been retrieved for the file or directory specified by FileName.

Note: This event will not fire every time a file or directory is accessed. To check file security upon each access to a file or directory, implement the file create and open events and perform the necessary checks there instead.

Applications need to handle this event only if they have added a standard filter rule that includes [the TBD]. FS_NE_GET_SECURITY flag.

The SecurityInformation parameter indicates which pieces of security information were requested. Please refer to Microsoft's SECURITY_INFORMATION data-type documentation for more information about possible values.

The SecurityDescriptor parameter points to a memory buffer that, if the request was successful, contains the requested security information. The Length parameter reflects the length of this data, in bytes. Please see the Buffer Parameters topic for more information on how to work with memory buffer event parameters.

The data are formatted as a SECURITY_DESCRIPTOR structure in self-relative format; please refer to the Microsoft's documentation for more information.

The Status parameter contains an NT status code that indicates the outcome of the operation; 0 indicates success. To convert this value to a Win32 error code, call the NtStatusToWin32Error method.

Note: This event will not fire for failed requests unless the ProcessFailedRequests property is enabled.

The ResultCode parameter will always be 0 when the event is fired. If the event cannot be handled in a "successful" manner for some reason, set it to a non-zero value to report an appropriate error.

Note: This event fires after the operation has already completed, so reporting an error will not actually affect the operation itself. Please refer to the Error Reporting and Handling topic for more information.

This event is fired asynchronously; please refer to the Event Types topic for more information.

NotifyGetFileSizes Event (CBFilter Component)

This event fires when a file's size information has been retrieved.

Syntax

type TNotifyGetFileSizesEvent = procedure (
  Sender: TObject;
  const FileName: String;
  Size: Int64;
  AllocationSize: Int64;
  Status: Integer;
  var ResultCode: Integer
) of Object;

property OnNotifyGetFileSizes: TNotifyGetFileSizesEvent read FOnNotifyGetFileSizes write FOnNotifyGetFileSizes;

Remarks

This event fires when size information has been retrieved for the file specified by FileName.

Applications need to handle this event only if they have added a standard filter rule that includes [the TBD]. FS_NE_GET_SIZES flag.

The Size parameter reflects the actual size of the file, in bytes.

The AllocationSize parameter reflects the amount of space allocated for the file, in bytes.

The Status parameter contains an NT status code that indicates the outcome of the operation; 0 indicates success. To convert this value to a Win32 error code, call the NtStatusToWin32Error method.

Note: This event will not fire for failed requests unless the ProcessFailedRequests property is enabled.

The ResultCode parameter will always be 0 when the event is fired. If the event cannot be handled in a "successful" manner for some reason, set it to a non-zero value to report an appropriate error.

Note: This event fires after the operation has already completed, so reporting an error will not actually affect the operation itself. Please refer to the Error Reporting and Handling topic for more information.

This event is fired asynchronously; please refer to the Event Types topic for more information.

NotifyGetReparsePoint Event (CBFilter Component)

This event fires when a file or directory's reparse point information has been retrieved.

Syntax

type TNotifyGetReparsePointEvent = procedure (
  Sender: TObject;
  const FileName: String;
  Status: Integer;
  var ResultCode: Integer
) of Object;

property OnNotifyGetReparsePoint: TNotifyGetReparsePointEvent read FOnNotifyGetReparsePoint write FOnNotifyGetReparsePoint;

Remarks

This event fires when reparse point information has been retrieved for the file or directory specified by FileName.

Applications need to handle this event only if they have added a standard filter rule that includes [the TBD]. FS_NE_GET_REPARSE_POINT flag.

The Status parameter contains an NT status code that indicates the outcome of the operation; 0 indicates success. To convert this value to a Win32 error code, call the NtStatusToWin32Error method.

Note: This event will not fire for failed requests unless the ProcessFailedRequests property is enabled.

The ResultCode parameter will always be 0 when the event is fired. If the event cannot be handled in a "successful" manner for some reason, set it to a non-zero value to report an appropriate error.

Note: This event fires after the operation has already completed, so reporting an error will not actually affect the operation itself. Please refer to the Error Reporting and Handling topic for more information.

This event is fired asynchronously; please refer to the Event Types topic for more information.

NotifyIoctl Event (CBFilter Component)

This event fires when an IRP_MJ_DEVICE_CONTROL operation has occurred.

Syntax

type TNotifyIoctlEvent = procedure (
  Sender: TObject;
  const FileName: String;
  IoControlCode: Integer;
  InBuffer: Pointer;
  InBufferLength: Integer;
  InBufferValidBytes: Integer;
  OutBuffer: Pointer;
  OutBufferLength: Integer;
  OutBufferValidBytes: Integer;
  Status: Integer;
  var ResultCode: Integer
) of Object;

property OnNotifyIoctl: TNotifyIoctlEvent read FOnNotifyIoctl write FOnNotifyIoctl;

Remarks

This event fires when an IRP_MJ_DEVICE_CONTROL (IOCTL) operation has occurred. Such requests are sent using the Windows API's DeviceIoControl function (user mode), or ZwDeviceIoControlFile function (kernel mode). Please refer to Microsoft's documentation for more information.

Applications need to handle this event only if they have added a standard filter rule that includes [the TBD]. FS_NE_IOCTL flag.

The FileName parameter reflects the file, directory, or volume targeted by the request.

The IoControlCode parameter reflects the requested I/O control code (IOCTL).

The InBuffer parameter points to a memory buffer that contains the data required to perform the operation. The InBufferLength and InBufferValidBytes parameters reflect the capacity of InBuffer and the length of the data it contains (respectively), in bytes; InBufferValidBytes may be less than InBufferLength (unless the request did not include data, in which case both will be 0).

The OutBuffer parameter points to a memory buffer that contains the data returned by the operation. The OutBufferLength and OutBufferValidBytes parameters reflect the capacity of OutBuffer and the length of the data it contains (respectively), in bytes; OutBufferValidBytes may be less than OutBufferLength (unless the operation did not return data, in which case both will be 0).

Please see the Buffer Parameters topic for more information on how to work with memory buffer event parameters.

The Status parameter contains an NT status code that indicates the outcome of the operation; 0 indicates success. To convert this value to a Win32 error code, call the NtStatusToWin32Error method.

Note: This event will not fire for failed requests unless the ProcessFailedRequests property is enabled.

The ResultCode parameter will always be 0 when the event is fired. If the event cannot be handled in a "successful" manner for some reason, set it to a non-zero value to report an appropriate error.

Note: This event fires after the operation has already completed, so reporting an error will not actually affect the operation itself. Please refer to the Error Reporting and Handling topic for more information.

This event is fired asynchronously; please refer to the Event Types topic for more information.

NotifyLock Event (CBFilter Component)

This event fires when a range of bytes in a file has been locked.

Syntax

type TNotifyLockEvent = procedure (
  Sender: TObject;
  const FileName: String;
  Offset: Int64;
  Length: Int64;
  Key: Int64;
  FailImmediately: Boolean;
  ExclusiveLock: Boolean;
  Status: Integer;
  var ResultCode: Integer
) of Object;

property OnNotifyLock: TNotifyLockEvent read FOnNotifyLock write FOnNotifyLock;

Remarks

This event fires when a range of bytes in the file specified by FileName has been locked; This request is made either by the OS, or on behalf of a user mode application that called the Windows API's LockFile or LockFileEx function.

Applications need to handle this event only if they have added a standard filter rule that includes [the TBD]. FS_NE_LOCK_CONTROL flag.

The Offset parameter reflects the byte offset where the byte range lock starts.

The Length parameter reflects the length of the byte range lock.

The Key parameter reflects the key that the byte range lock is associated with. This key is used to identify the byte range lock in later unlock-by-key requests.

The FailImmediately parameter indicates whether the request was to fail if the lock could not be granted immediately.

The ExclusiveLock parameter indicates whether the byte range lock was to be exclusive (True) or shared (False).

The Status parameter contains an NT status code that indicates the outcome of the operation; 0 indicates success. To convert this value to a Win32 error code, call the NtStatusToWin32Error method.

Note: This event will not fire for failed requests unless the ProcessFailedRequests property is enabled.

The ResultCode parameter will always be 0 when the event is fired. If the event cannot be handled in a "successful" manner for some reason, set it to a non-zero value to report an appropriate error.

Note: This event fires after the operation has already completed, so reporting an error will not actually affect the operation itself. Please refer to the Error Reporting and Handling topic for more information.

This event is fired asynchronously; please refer to the Event Types topic for more information.

NotifyOpenFile Event (CBFilter Component)

This event fires when a file or directory has been opened.

Syntax

type TNotifyOpenFileEvent = procedure (
  Sender: TObject;
  const FileName: String;
  ExistingAttributes: Integer;
  DesiredAccess: Integer;
  Attributes: Integer;
  ShareMode: Integer;
  Options: Integer;
  CreateDisposition: Integer;
  SecurityDescriptor: Pointer;
  Length: Integer;
  Status: Integer;
  var ResultCode: Integer
) of Object;

property OnNotifyOpenFile: TNotifyOpenFileEvent read FOnNotifyOpenFile write FOnNotifyOpenFile;

Remarks

This event fires when the file or directory specified by FileName has been opened. Please refer to the File Create/Open Events topic for more information about how the component determines whether to fire this event or NotifyCreateFile.

Applications need to handle this event only if they have added a standard filter rule that includes [the TBD]. FS_NE_OPEN flag.

Note: Applications must have the FilterOwnRequests configuration setting enabled if they wish to filter their own file/directory open requests.

When extended rules are used or the AlwaysRequestAttributesOnOpen configuration setting is enabled, the driver requests attributes of the entity from the filesystem and passes them to ExistingAttributes. If the attributes are not requested, this parameter contains 0.

The DesiredAccess, Attributes, ShareMode, and CreateDisposition parameters reflect the values that were passed for the similarly named parameters of the Windows API's CreateFile function (or, more accurately, the values carried by the IRP_MJ_CREATE IRP).

DesiredAccess may contain one or more of the following access flags:

Attributes may contain one or more of the following attributes:

ShareMode may contain zero or more of the following share mode flags:

CreateDisposition may contain one of the following values:

Options contains the flags that are described in the CreateOptions parameter of the native API's ZwCreateFile function. Most of those flags correspond to flags passed in the FlagsAndAttributes parameter of the Windows API's CreateFile function, but some flags are specific to the native API. If you need those flags, check both functions' descriptions.

Please refer to Microsoft's documentation for detailed information about these constants.

To determine whether the request was for a file or a directory, compare Attributes against the FILE_SYS_ATTR_DIRECTORY constant, as follows: // Check whether the request is for a file or a directory. bool isDirectory = Attributes & FILE_SYS_ATTR_DIRECTORY == FILE_SYS_ATTR_DIRECTORY; FILE_SYS_ATTR_DIRECTORY will be present if it was specified by the calling process or if the existing filesystem entry is a directory.

To determine whether a file will be deleted when its last handle is closed, compare Options against the Windows API's FILE_FLAG_DELETE_ON_CLOSE constant, as follows: // Check whether the file will be deleted on close. bool deleteOnClose = Options & FILE_FLAG_DELETE_ON_CLOSE == FILE_FLAG_DELETE_ON_CLOSE; Note: Because files can be deleted in different ways, do not use this check to take actions related to tracking file deletion operations. Instead, use the events related to file deletion.

When a file or directory is created using the CreateFile() Windows API function, a caller can specify the security descriptor with the security information. This security information should be applied to a newly created file or directory. The component passes this security information in the SecurityInformation and SecurityDescriptor parameters, when the PassSecurityInFileOpenEvents configuration setting is enabled. If this configuration setting is omitted, the corresponding parameters are empty.

The SecurityInformation parameter reflects which pieces of security information, of those present in SecurityDescriptor, are valid and should have been applied. Please refer to Microsoft's SECURITY_INFORMATION data type documentation for more information about possible values.

The SecurityDescriptor parameter points to a memory buffer that contains the security information. The Length parameter reflects the length of this data, in bytes. Please see the Buffer Parameters topic for more information on how to work with memory buffer event parameters.

The data are formatted as a SECURITY_DESCRIPTOR structure in self-relative format; please refer to the Microsoft's documentation for more information.

If the Options contains the FILE_FLAG_DELETE_ON_CLOSE flag, the NotifyCanFileBeDeleted event will fire after this event.

If the file is opened with extended attributes passed in the request, the NotifySetEa event will fire after this event.

The Status parameter contains an NT status code that indicates the outcome of the operation; 0 indicates success. To convert this value to a Win32 error code, call the NtStatusToWin32Error method.

Note: This event will not fire for failed requests unless the ProcessFailedRequests property is enabled.

The ResultCode parameter will always be 0 when the event is fired. If the event cannot be handled in a "successful" manner for some reason, set it to a non-zero value to report an appropriate error.

Note: This event fires after the operation has already completed, so reporting an error will not actually affect the operation itself. Please refer to the Error Reporting and Handling topic for more information.

This event is fired asynchronously; please refer to the Event Types topic for more information.

NotifyQueryEa Event (CBFilter Component)

This event fires when information about the extended attributes of a file has been retrieved.

Syntax

type TNotifyQueryEaEvent = procedure (
  Sender: TObject;
  const FileName: String;
  Buffer: Pointer;
  BufferLength: Integer;
  ReturnSingleEntry: Boolean;
  EaList: Pointer;
  EaListLength: Integer;
  EaIndex: Integer;
  RestartScan: Boolean;
  LengthReturned: Integer;
  Status: Integer;
  var ResultCode: Integer
) of Object;

property OnNotifyQueryEa: TNotifyQueryEaEvent read FOnNotifyQueryEa write FOnNotifyQueryEa;

Remarks

This event fires when information about the extended attributes of a file specified by FileName has been retrieved.

Applications need to handle this event only if they have added a standard filter rule that includes [the TBD]. FS_NE_QUERY_EA flag.

The Buffer parameter points to a memory buffer that, if the request was successful, contains the requested information. The data in the buffer are formatted as a FILE_FULL_EA_INFORMATION structure; please refer to the Microsoft's documentation for more information. The Length parameter reflects the length of this buffer, in bytes. Please see the Buffer Parameters topic for more information on how to work with memory buffer event parameters.

ReturnSingleEntry specifies that the filesystem had to return only the first entry it has found.

EaList is an optional parameter that points to a caller-supplied memory buffer specifying the extended attributes to be queried. The data in the buffer are formatted as a FILE_GET_EA_INFORMATION structure; please refer to the Microsoft's documentation for more information. The EaListLength parameter reflects the length of this data, in bytes. If the caller of the FltQueryEaFile function did not specify any value, it will contain 0.

EaIndex is an optional parameter that specifies the starting index of the attribute, information about which was requested. This parameter is ignored by the filesystem if EaList points to a nonempty list. If the caller of the FltQueryEaFile function did not specify any value, the parameter will contain -1.

The RestartScan parameter instructs the filesystem to restart enumeration of extended attributes from the first entry. If the parameter is False, retrieval of the extended attributes is resumed by the filesystem after a previous request.

LengthReturned is an optional parameter that contains the size, in bytes, of the information, returned in the Buffer.

The Status parameter contains an NT status code that indicates the outcome of the operation; 0 indicates success. To convert this value to a Win32 error code, call the NtStatusToWin32Error method.

Note: This event will not fire for failed requests unless the ProcessFailedRequests property is enabled.

The ResultCode parameter will always be 0 when the event is fired. If the event cannot be handled in a "successful" manner for some reason, set it to a non-zero value to report an appropriate error.

Note: This event fires after the operation has already completed, so reporting an error will not actually affect the operation itself. Please refer to the Error Reporting and Handling topic for more information.

This event is fired asynchronously; please refer to the Event Types topic for more information.

NotifyQueryFileInfo Event (CBFilter Component)

This event fires when information about a file or directory has been retrieved.

Syntax

type TNotifyQueryFileInfoEvent = procedure (
  Sender: TObject;
  const FileName: String;
  FileInformationClass: Integer;
  Buffer: Pointer;
  BufferLength: Integer;
  ValidBytes: Integer;
  Status: Integer;
  var ResultCode: Integer
) of Object;

property OnNotifyQueryFileInfo: TNotifyQueryFileInfoEvent read FOnNotifyQueryFileInfo write FOnNotifyQueryFileInfo;

Remarks

This event fires when information about a file or directory specified by FileName has been retrieved; This event typically fires in response to the Windows API's NtQueryInformationFile function.

Applications need to handle this event only if they have added a standard filter rule that includes [the TBD]. FS_NE_QUERY_FILE_INFO flag.

The FileInformationClass parameter indicates what kind of file information was requested. Please refer to the NtQueryInformationFile function's documentation for more information about possible values.

The Buffer parameter points to a memory buffer that, if the request was successful, contains the requested file information. The BufferLength and ValidBytes parameters reflect the capacity of Buffer and the length of the data it contains (respectively), in bytes; ValidBytes may be less than BufferLength. Please see the Buffer Parameters topic for more information on how to work with memory buffer event parameters.

The format of the data is determined by the specified FileInformationClass; please refer to the NtQueryInformationFile function's documentation for more information.

The Status parameter contains an NT status code that indicates the outcome of the operation; 0 indicates success. To convert this value to a Win32 error code, call the NtStatusToWin32Error method.

Note: This event will not fire for failed requests unless the ProcessFailedRequests property is enabled.

The ResultCode parameter will always be 0 when the event is fired. If the event cannot be handled in a "successful" manner for some reason, set it to a non-zero value to report an appropriate error.

Note: This event fires after the operation has already completed, so reporting an error will not actually affect the operation itself. Please refer to the Error Reporting and Handling topic for more information.

This event is fired asynchronously; please refer to the Event Types topic for more information.

NotifyReadFile Event (CBFilter Component)

This event fires when data have been read from a file.

Syntax

type TNotifyReadFileEvent = procedure (
  Sender: TObject;
  const FileName: String;
  Position: Int64;
  BytesToRead: Integer;
  Direction: Integer;
  BytesRead: Integer;
  Status: Integer;
  var ResultCode: Integer
) of Object;

property OnNotifyReadFile: TNotifyReadFileEvent read FOnNotifyReadFile write FOnNotifyReadFile;

Remarks

This event fires when data have been read from a file specified by FileName.

Applications need to handle this event only if they have added a standard filter rule that includes [the TBD]. FS_NE_READ flag.

The Position parameter reflects the byte offset in the file at which reading started.

The BytesToRead parameter reflects how many bytes were to be read from the file.

The Direction parameter indicates the request direction; please refer to the Cached and Non-Cached Requests topic for more information. Possible values are as follows:

The BytesRead parameter reflects how many bytes were actually read from the file.

The Status parameter contains an NT status code that indicates the outcome of the operation; 0 indicates success. To convert this value to a Win32 error code, call the NtStatusToWin32Error method.

Note: This event will not fire for failed requests unless the ProcessFailedRequests property is enabled.

The ResultCode parameter will always be 0 when the event is fired. If the event cannot be handled in a "successful" manner for some reason, set it to a non-zero value to report an appropriate error.

Note: This event fires after the operation has already completed, so reporting an error will not actually affect the operation itself. Please refer to the Error Reporting and Handling topic for more information.

This event is fired asynchronously; please refer to the Event Types topic for more information.

NotifyRenameOrMoveFile Event (CBFilter Component)

This event fires when a file or directory has been renamed or moved.

Syntax

type TNotifyRenameOrMoveFileEvent = procedure (
  Sender: TObject;
  const FileName: String;
  const NewFileName: String;
  Status: Integer;
  var ResultCode: Integer
) of Object;

property OnNotifyRenameOrMoveFile: TNotifyRenameOrMoveFileEvent read FOnNotifyRenameOrMoveFile write FOnNotifyRenameOrMoveFile;

Remarks

This event fires when a file or directory specified by FileName has been renamed or moved to NewFileName.

Applications need to handle this event only if they have added a standard filter rule that includes [the TBD]. FS_NE_RENAME flag. A rule's mask is matched against both previous and new filenames, and the event will fire when either of the names matches the mask.

The Status parameter contains an NT status code that indicates the outcome of the operation; 0 indicates success. To convert this value to a Win32 error code, call the NtStatusToWin32Error method.

Note: This event will not fire for failed requests unless the ProcessFailedRequests property is enabled.

The ResultCode parameter will always be 0 when the event is fired. If the event cannot be handled in a "successful" manner for some reason, set it to a non-zero value to report an appropriate error.

Note: This event fires after the operation has already completed, so reporting an error will not actually affect the operation itself. Please refer to the Error Reporting and Handling topic for more information.

This event is fired asynchronously; please refer to the Event Types topic for more information.

NotifySetAllocationSize Event (CBFilter Component)

This event fires when a file's allocation size has been changed.

Syntax

type TNotifySetAllocationSizeEvent = procedure (
  Sender: TObject;
  const FileName: String;
  AllocationSize: Int64;
  Status: Integer;
  var ResultCode: Integer
) of Object;

property OnNotifySetAllocationSize: TNotifySetAllocationSizeEvent read FOnNotifySetAllocationSize write FOnNotifySetAllocationSize;

Remarks

This event fires when the allocation size of the file specified by FileName has been changed.

Applications need to handle this event only if they have added a standard filter rule that includes [the TBD]. FS_NE_SET_SIZES flag.

The AllocationSize parameter reflects the new allocation size, in bytes. A file's allocation size is typically larger than its actual size because filesystem operations often reserve space on disk before writing additional data to a file.

The Status parameter contains an NT status code that indicates the outcome of the operation; 0 indicates success. To convert this value to a Win32 error code, call the NtStatusToWin32Error method.

Note: This event will not fire for failed requests unless the ProcessFailedRequests property is enabled.

The ResultCode parameter will always be 0 when the event is fired. If the event cannot be handled in a "successful" manner for some reason, set it to a non-zero value to report an appropriate error.

Note: This event fires after the operation has already completed, so reporting an error will not actually affect the operation itself. Please refer to the Error Reporting and Handling topic for more information.

This event is fired asynchronously; please refer to the Event Types topic for more information.

NotifySetEa Event (CBFilter Component)

This event fires when information about the extended attributes of a file has been changed.

Syntax

type TNotifySetEaEvent = procedure (
  Sender: TObject;
  const FileName: String;
  Buffer: Pointer;
  BufferLength: Integer;
  Status: Integer;
  var ResultCode: Integer
) of Object;

property OnNotifySetEa: TNotifySetEaEvent read FOnNotifySetEa write FOnNotifySetEa;

Remarks

This event fires when information about the extended attributes of a file specified by FileName has been changed.

If the file is created or opened with extended attributes passed in the request, this event will fire shortly after the NotifyCreateFile or NotifyOpenFile event.

Applications need to handle this event only if they have added a standard filter rule that includes [the TBD]. FS_NE_SET_EA flag.

The Buffer parameter points to a memory buffer that specifies the extended attribute information. The Length parameter reflects the length of this buffer, in bytes. Please see the Buffer Parameters topic for more information on how to work with memory buffer event parameters.

The data are formatted as a FILE_FULL_EA_INFORMATION structure; please refer to the Microsoft's documentation for more information.

The Status parameter contains an NT status code that indicates the outcome of the operation; 0 indicates success. To convert this value to a Win32 error code, call the NtStatusToWin32Error method.

Note: This event will not fire for failed requests unless the ProcessFailedRequests property is enabled.

The ResultCode parameter will always be 0 when the event is fired. If the event cannot be handled in a "successful" manner for some reason, set it to a non-zero value to report an appropriate error.

Note: This event fires after the operation has already completed, so reporting an error will not actually affect the operation itself. Please refer to the Error Reporting and Handling topic for more information.

This event is fired asynchronously; please refer to the Event Types topic for more information.

NotifySetFileAttributes Event (CBFilter Component)

This event fires when a file or directory's attributes or times have been changed.

Syntax

type TNotifySetFileAttributesEvent = procedure (
  Sender: TObject;
  const FileName: String;
  CreationTime: TDateTime;
  LastAccessTime: TDateTime;
  LastWriteTime: TDateTime;
  ChangeTime: TDateTime;
  Attributes: Integer;
  Status: Integer;
  var ResultCode: Integer
) of Object;

property OnNotifySetFileAttributes: TNotifySetFileAttributesEvent read FOnNotifySetFileAttributes write FOnNotifySetFileAttributes;

Remarks

This event fires when the attributes or times of the file or directory specified by FileName have been changed.

Applications need to handle this event only if they have added a standard filter rule that includes [the TBD]. FS_NE_SET_ATTRIBUTES flag.

The CreationTime, LastAccessTime, LastWriteTime, and ChangeTime parameters reflect the new time values, specified in UTC. A value of January 1, 1601 00:00:00 UTC indicates that the corresponding time value was not included in the request.

The Attributes parameter reflects the new attributes; please refer to Microsoft's File Attribute Constants article for attribute descriptions.

The Status parameter contains an NT status code that indicates the outcome of the operation; 0 indicates success. To convert this value to a Win32 error code, call the NtStatusToWin32Error method.

Note: This event will not fire for failed requests unless the ProcessFailedRequests property is enabled.

The ResultCode parameter will always be 0 when the event is fired. If the event cannot be handled in a "successful" manner for some reason, set it to a non-zero value to report an appropriate error.

Note: This event fires after the operation has already completed, so reporting an error will not actually affect the operation itself. Please refer to the Error Reporting and Handling topic for more information.

This event is fired asynchronously; please refer to the Event Types topic for more information.

NotifySetFileInfo Event (CBFilter Component)

This event fires when information about a file or directory has been changed.

Syntax

type TNotifySetFileInfoEvent = procedure (
  Sender: TObject;
  const FileName: String;
  FileInformationClass: Integer;
  Buffer: Pointer;
  BufferLength: Integer;
  ValidBytes: Integer;
  Status: Integer;
  var ResultCode: Integer
) of Object;

property OnNotifySetFileInfo: TNotifySetFileInfoEvent read FOnNotifySetFileInfo write FOnNotifySetFileInfo;

Remarks

This event fires when information about a file or directory specified by FileName has been changed; This event typically fires in response to the Windows API's NtSetInformationFile function.

Applications need to handle this event only if they have added a standard filter rule that includes [the TBD]. FS_NE_QUERY_FILE_INFO flag.

The FileInformationClass parameter indicates what kind of file information was set. Please refer to the NtSetInformationFile function's documentation for more information about possible values.

The Buffer parameter points to a memory buffer that, if the request was successful, contains the new file information. The BufferLength and ValidBytes parameters reflect the capacity of Buffer and the length of the data it contains (respectively), in bytes; ValidBytes may be less than BufferLength. Please see the Buffer Parameters topic for more information on how to work with memory buffer event parameters.

The format of the data is determined by the specified FileInformationClass; please refer to the NtSetInformationFile function's documentation for more information.

The Status parameter contains an NT status code that indicates the outcome of the operation; 0 indicates success. To convert this value to a Win32 error code, call the NtStatusToWin32Error method.

Note: This event will not fire for failed requests unless the ProcessFailedRequests property is enabled.

The ResultCode parameter will always be 0 when the event is fired. If the event cannot be handled in a "successful" manner for some reason, set it to a non-zero value to report an appropriate error.

Note: This event fires after the operation has already completed, so reporting an error will not actually affect the operation itself. Please refer to the Error Reporting and Handling topic for more information.

This event is fired asynchronously; please refer to the Event Types topic for more information.

NotifySetFileSecurity Event (CBFilter Component)

This event fires when a file or directory's security attributes have been changed.

Syntax

type TNotifySetFileSecurityEvent = procedure (
  Sender: TObject;
  const FileName: String;
  SecurityInformation: Integer;
  SecurityDescriptor: Pointer;
  Length: Integer;
  Status: Integer;
  var ResultCode: Integer
) of Object;

property OnNotifySetFileSecurity: TNotifySetFileSecurityEvent read FOnNotifySetFileSecurity write FOnNotifySetFileSecurity;

Remarks

This event fires when security attributes have been changed for a file or directory specified by FileName.

Applications need to handle this event only if they have added a standard filter rule that includes [the TBD]. FS_NE_SET_SECURITY flag.

The SecurityInformation parameter reflects which pieces of security information, of those present in SecurityDescriptor, were to be set. Please refer to Microsoft's SECURITY_INFORMATION data-type documentation for more information about possible values.

The SecurityDescriptor parameter points to a memory buffer that contains the new security information. The Length parameter reflects the length of this data, in bytes. Please see the Buffer Parameters topic for more information on how to work with memory buffer event parameters.

The data are formatted as a SECURITY_DESCRIPTOR structure in self-relative format; please refer to the Microsoft's documentation for more information.

The Status parameter contains an NT status code that indicates the outcome of the operation; 0 indicates success. To convert this value to a Win32 error code, call the NtStatusToWin32Error method.

Note: This event will not fire for failed requests unless the ProcessFailedRequests property is enabled.

The ResultCode parameter will always be 0 when the event is fired. If the event cannot be handled in a "successful" manner for some reason, set it to a non-zero value to report an appropriate error.

Note: This event fires after the operation has already completed, so reporting an error will not actually affect the operation itself. Please refer to the Error Reporting and Handling topic for more information.

This event is fired asynchronously; please refer to the Event Types topic for more information.

NotifySetFileSize Event (CBFilter Component)

This event fires when a file has been resized.

Syntax

type TNotifySetFileSizeEvent = procedure (
  Sender: TObject;
  const FileName: String;
  Size: Int64;
  Status: Integer;
  var ResultCode: Integer
) of Object;

property OnNotifySetFileSize: TNotifySetFileSizeEvent read FOnNotifySetFileSize write FOnNotifySetFileSize;

Remarks

This event fires when the file specified by FileName has been resized, whether explicitly (e.g., truncation) or implicitly (i.e., as data are appended).

Applications need to handle this event only if they have added a standard filter rule that includes [the TBD]. FS_NE_SET_SIZES flag.

The Size parameter reflects the new file size, in bytes.

The Status parameter contains an NT status code that indicates the outcome of the operation; 0 indicates success. To convert this value to a Win32 error code, call the NtStatusToWin32Error method.

Note: This event will not fire for failed requests unless the ProcessFailedRequests property is enabled.

The ResultCode parameter will always be 0 when the event is fired. If the event cannot be handled in a "successful" manner for some reason, set it to a non-zero value to report an appropriate error.

Note: This event fires after the operation has already completed, so reporting an error will not actually affect the operation itself. Please refer to the Error Reporting and Handling topic for more information.

This event is fired asynchronously; please refer to the Event Types topic for more information.

NotifySetReparsePoint Event (CBFilter Component)

This event fires when a file or directory's reparse point has been created or updated.

Syntax

type TNotifySetReparsePointEvent = procedure (
  Sender: TObject;
  const FileName: String;
  ReparseTag: Int64;
  Status: Integer;
  var ResultCode: Integer
) of Object;

property OnNotifySetReparsePoint: TNotifySetReparsePointEvent read FOnNotifySetReparsePoint write FOnNotifySetReparsePoint;

Remarks

This event fires when a reparse point has been created or updated for a file or directory specified by FileName.

Applications need to handle this event only if they have added a standard filter rule that includes [the TBD]. FS_NE_SET_REPARSE_POINT flag.

The ReparseTag parameter contains the reparse tag, which is the value the system uses to identify the format of the reparse point data.

The Status parameter contains an NT status code that indicates the outcome of the operation; 0 indicates success. To convert this value to a Win32 error code, call the NtStatusToWin32Error method.

Note: This event will not fire for failed requests unless the ProcessFailedRequests property is enabled.

The ResultCode parameter will always be 0 when the event is fired. If the event cannot be handled in a "successful" manner for some reason, set it to a non-zero value to report an appropriate error.

Note: This event fires after the operation has already completed, so reporting an error will not actually affect the operation itself. Please refer to the Error Reporting and Handling topic for more information.

This event is fired asynchronously; please refer to the Event Types topic for more information.

NotifyUnlockAll Event (CBFilter Component)

This event fires when all locked byte ranges in a file have been unlocked.

Syntax

type TNotifyUnlockAllEvent = procedure (
  Sender: TObject;
  const FileName: String;
  Status: Integer;
  var ResultCode: Integer
) of Object;

property OnNotifyUnlockAll: TNotifyUnlockAllEvent read FOnNotifyUnlockAll write FOnNotifyUnlockAll;

Remarks

This event fires when all locked byte ranges in the file specified by FileName have been unlocked.

Applications need to handle this event only if they have added a standard filter rule that includes [the TBD]. FS_NE_LOCK_CONTROL flag.

The Status parameter contains an NT status code that indicates the outcome of the operation; 0 indicates success. To convert this value to a Win32 error code, call the NtStatusToWin32Error method.

Note: This event will not fire for failed requests unless the ProcessFailedRequests property is enabled.

The ResultCode parameter will always be 0 when the event is fired. If the event cannot be handled in a "successful" manner for some reason, set it to a non-zero value to report an appropriate error.

Note: This event fires after the operation has already completed, so reporting an error will not actually affect the operation itself. Please refer to the Error Reporting and Handling topic for more information.

This event is fired asynchronously; please refer to the Event Types topic for more information.

NotifyUnlockAllByKey Event (CBFilter Component)

This event fires when all locked byte ranges in a file, associated with a particular key, have been unlocked.

Syntax

type TNotifyUnlockAllByKeyEvent = procedure (
  Sender: TObject;
  const FileName: String;
  Key: Int64;
  Status: Integer;
  var ResultCode: Integer
) of Object;

property OnNotifyUnlockAllByKey: TNotifyUnlockAllByKeyEvent read FOnNotifyUnlockAllByKey write FOnNotifyUnlockAllByKey;

Remarks

This event fires when all locked byte ranges in the file specified by FileName, and associated with the specified Key, have been unlocked.

Applications need to handle this event only if they have added a standard filter rule that includes [the TBD]. FS_NE_LOCK_CONTROL flag.

The Key parameter contains the key value specified when the byte ranges were locked. Please refer to the NotifyLock event's documentation for more information.

The Status parameter contains an NT status code that indicates the outcome of the operation; 0 indicates success. To convert this value to a Win32 error code, call the NtStatusToWin32Error method.

Note: This event will not fire for failed requests unless the ProcessFailedRequests property is enabled.

The ResultCode parameter will always be 0 when the event is fired. If the event cannot be handled in a "successful" manner for some reason, set it to a non-zero value to report an appropriate error.

Note: This event fires after the operation has already completed, so reporting an error will not actually affect the operation itself. Please refer to the Error Reporting and Handling topic for more information.

This event is fired asynchronously; please refer to the Event Types topic for more information.

NotifyUnlockSingle Event (CBFilter Component)

This event fires when a particular locked byte range in a file has been unlocked.

Syntax

type TNotifyUnlockSingleEvent = procedure (
  Sender: TObject;
  const FileName: String;
  Offset: Int64;
  Length: Int64;
  Key: Int64;
  Status: Integer;
  var ResultCode: Integer
) of Object;

property OnNotifyUnlockSingle: TNotifyUnlockSingleEvent read FOnNotifyUnlockSingle write FOnNotifyUnlockSingle;

Remarks

This event fires when a particular locked byte range in a file specified by FileName has been unlocked.

Applications need to handle this event only if they have added a standard filter rule that includes [the TBD]. FS_NE_LOCK_CONTROL flag.

The Offset, Length, and Key parameters contain the starting byte offset, length, and key values, respectively, specified when the byte range was locked. Please refer to the NotifyLock event's documentation for more information.

The Status parameter contains an NT status code that indicates the outcome of the operation; 0 indicates success. To convert this value to a Win32 error code, call the NtStatusToWin32Error method.

Note: This event will not fire for failed requests unless the ProcessFailedRequests property is enabled.

The ResultCode parameter will always be 0 when the event is fired. If the event cannot be handled in a "successful" manner for some reason, set it to a non-zero value to report an appropriate error.

Note: This event fires after the operation has already completed, so reporting an error will not actually affect the operation itself. Please refer to the Error Reporting and Handling topic for more information.

This event is fired asynchronously; please refer to the Event Types topic for more information.

NotifyWriteFile Event (CBFilter Component)

This event fires when data have been written to a file.

Syntax

type TNotifyWriteFileEvent = procedure (
  Sender: TObject;
  const FileName: String;
  Position: Int64;
  BytesToWrite: Integer;
  Direction: Integer;
  BytesWritten: Integer;
  Status: Integer;
  var ResultCode: Integer
) of Object;

property OnNotifyWriteFile: TNotifyWriteFileEvent read FOnNotifyWriteFile write FOnNotifyWriteFile;

Remarks

This event fires when data have been written to the file specified by FileName.

Applications need to handle this event only if they have added a standard filter rule that includes [the TBD]. FS_NE_WRITE flag.

The Position parameter reflects the byte offset in the file at which writing started. A value of -1 means "append to the end of the file".

The BytesToWrite parameter reflects how many bytes were to be written to the file.

The Direction parameter indicates the request direction; please refer to the Cached and Non-Cached Requests topic for more information. Possible values are as follows:

The BytesWritten parameter reflects how many bytes were actually written to the file.

The Status parameter contains an NT status code that indicates the outcome of the operation; 0 indicates success. To convert this value to a Win32 error code, call the NtStatusToWin32Error method.

Note: This event will not fire for failed requests unless the ProcessFailedRequests property is enabled.

The ResultCode parameter will always be 0 when the event is fired. If the event cannot be handled in a "successful" manner for some reason, set it to a non-zero value to report an appropriate error.

Note: This event fires after the operation has already completed, so reporting an error will not actually affect the operation itself. Please refer to the Error Reporting and Handling topic for more information.

This event is fired asynchronously; please refer to the Event Types topic for more information.

ReparseFileName Event (CBFilter Component)

This event fires to allow file access to be dynamically redirected to another location.

Syntax

type TReparseFileNameEvent = procedure (
  Sender: TObject;
  const FileName: String;
  DesiredAccess: Integer;
  const ReparsedFileName: String;
  var NewFileName: String;
  var ResultCode: Integer
) of Object;

property OnReparseFileName: TReparseFileNameEvent read FOnReparseFileName write FOnReparseFileName;

Remarks

Applications can use this event to dynamically redirect access to the file or directory specified by FileName to another location.

The event fires before a file or directory is created or opened, after the corresponding BeforeCreateFile or BeforeOpenFile events fire.

Applications need to handle this event only if they have added a standard filter rule that includes [the TBD]. FS_CE_REPARSE_FILENAME flag.

The DesiredAccess parameter reflects the value that was passed for the similarly named parameter of the Windows API's CreateFile function. Please refer to Microsoft's documentation for more information.

The ReparsedFileName parameter reflects the default redirection destination. If the specified file or directory matches an existing reparse rule, this parameter's value is generated based on said rule; otherwise, this parameter will reflect the same value as FileName.

The NewFileName parameter specifies an application-defined redirection destination. This parameter's value, if set, must be less than 1024 characters in length.

If the application sets NewFileName to a nonempty value, it will be used as the redirection destination. Otherwise, the value reflected by ReparseFileName will be used as the redirection destination.

The ResultCode parameter will always be 0 when the event is fired. If the event cannot be handled in a "successful" manner for some reason (e.g., a resource is not available or security checks failed), set it to a nonzero value to report an appropriate error. Please see the Error Reporting and Handling topic for more information.

This event is fired synchronously; please refer to the Event Types topic for more information.

ReparseWithTag Event (CBFilter Component)

This event fires if an open operation returns STATUS_REPARSE so that the application can respond to the reparse point.

Syntax

type TReparseWithTagEvent = procedure (
  Sender: TObject;
  const FileName: String;
  const NewFileName: String;
  ReparseTag: Integer;
  ReparseBuffer: Pointer;
  ReparseBufferLength: Integer;
  var ReissueIO: Boolean;
  var ResultCode: Integer
) of Object;

property OnReparseWithTag: TReparseWithTagEvent read FOnReparseWithTag write FOnReparseWithTag;

Remarks

This event fires if a STATUS_REPARSE result is returned when the OS attempts to open the file or directory specified by FileName, which indicates that a reparse point is associated with said file or directory or one of its parents. More specifically, it fires immediately after the open operation returns such a result.

It is possible for applications to add reparse points to specific files/directories so that the filesystem will return STATUS_REPARSE when someone attempts to open them. Such applications can then use this event to perform some operation on the file/directory, assuming that the specified ReparseTag belongs to the application. Please refer to Microsoft's Reparse Point articles for more information.

Applications need to handle this event only if they have added a standard filter rule that includes [the TBD]. FS_CE_REPARSE_TAG flag.

If the reparse tag was recognized by the filesystem or some filesystem filter, NewFileName can contain the new path, to which the request should be sent.

The ReparseTag parameter reflects the reparse point's tag, which is the value the system uses to identify the format of the reparse point data. This value is also present in the ReparseBuffer data; the component extracts it and provides it separately for convenience.

The ReparseBuffer parameter points to a memory buffer that contains the full reparse point data. The ReparseBufferLength parameter reflects the length of ReparseBuffer. Please see the Buffer Parameters topic for more information on how to work with memory buffer event parameters.

The data are formatted using either a REPARSE_GUID_DATA_BUFFER structure or (for certain Microsoft-reserved tags) a REPARSE_DATA_BUFFER structure; please refer to Microsoft's documentation for more information.

If the part of the path contained in FileName constitutes a symbolic link or a junction point (both of which are handled by the filesystem), the structure in ReparseBuffer will contain the new path that is to replace a part of the original path. In such a case, the Reserved field of the REPARSE_DATA_BUFFER structure will contain the length in bytes in the original filename buffer that remains unchanged. This value, divided by 2, is the number of characters at the end of FileName that you must append to the new path, contained in ReparseBuffer.

ReissueIO can be set to True to instruct the OS to resend the original request again from the beginning. This may be necessary if the reparse tag is removed from the file or altered during this event.

Please refer to the Reparse Points topic for more information.

The ResultCode parameter will always be 0 when the event is fired. If the event cannot be handled in a "successful" manner for some reason (e.g., a resource is not available or security checks failed), set it to a nonzero value to report an appropriate error. Please see the Error Reporting and Handling topic for more information.

This event is fired synchronously; please refer to the Event Types topic for more information.

WorkerThreadCreation Event (CBFilter Component)

Fires just after a new worker thread is created.

Syntax

type TWorkerThreadCreationEvent = procedure (
  Sender: TObject;
  var ResultCode: Integer
) of Object;

property OnWorkerThreadCreation: TWorkerThreadCreationEvent read FOnWorkerThreadCreation write FOnWorkerThreadCreation;

Remarks

This event fires just after a worker thread is created, in the context of that worker thread.

This event is optional; it is provided to give applications a chance to perform additional processing when a new worker thread is created, such as allocating per-thread objects.

The component maintains a pool of worker threads and uses them to fire events; please refer to the Threading and Concurrency topic for more information.

The ResultCode parameter will always be 0 when the event is fired. If the event cannot be handled in a "successful" manner for some reason (e.g., a resource is not available or security checks failed), set it to a nonzero value to report an appropriate error. Please see the Error Reporting and Handling topic for more information.

This event is fired synchronously; please refer to the Event Types topic for more information.

WorkerThreadTermination Event (CBFilter Component)

Fires just before a worker thread is terminated.

Syntax

type TWorkerThreadTerminationEvent = procedure (
  Sender: TObject
) of Object;

property OnWorkerThreadTermination: TWorkerThreadTerminationEvent read FOnWorkerThreadTermination write FOnWorkerThreadTermination;

Remarks

This event fires just before a worker thread is terminated, in the context of that worker thread.

This event is optional; it is provided to give applications a chance to perform additional processing before a worker thread is terminated, such as deallocating per-thread objects.

The component maintains a pool of worker threads and uses them to fire events; please refer to the Threading and Concurrency topic for more information.

Any errors that occur during this event are ignored.

This event is fired synchronously; please refer to the Event Types topic for more information.

FileDefaultRule Type

This type represents a filesystem default rule.

Remarks

This type represents a filesystem default rule. Please refer to the Default Rules topic for more information.

Fields

FileFilterRule Type

This type represents a filesystem filter rule.

Remarks

This type represents a filesystem filter rule, which may be a standard filter rule, an access rule, or a combination of both. Please refer to the File and Registry Filter Rules and Access Rules topics for more information.

Fields

FilePassthroughRule Type

This type represents a filesystem passthrough rule.

Remarks

This type represents a filesystem passthrough rule. Please refer to the Passthrough Rules topic for more information.

Fields

FileReparseRule Type

This type represents a filesystem reparse rule.

Remarks

This type represents a filesystem reparse rule. Please refer to the Reparse Rules topic for more information.

Fields

CBFSFilterStream Type

Syntax

cbfcore.TCBFSFilterStream

Remarks

The CBFSFilterStream type is returned by some of the CBFilter component's methods. All stream types in CBFS Filter share a common API, inherited from the System.Classes.TStream class, documented below.

Note that, for brevity, many of the properties and methods offered by System.Classes.TStream are not documented here; please refer to Embarcadero's documentation for more information.

Properties
Position	Gets or sets the current position within the stream. property Position: Int64 read GetPosition write SetPosition;
Size	Gets or sets the length of the stream, in bytes. property Size: Int64 read GetSize write SetSize64;
Methods
Flush	Forces all data held by the stream's buffers to be written out to storage. procedure Flush();
Read	Reads a sequence of bytes from the stream and advances the current position within the stream by the number of bytes read. function Read(var Buffer; Count: Longint): Longint; Buffer specifies the buffer to populate with data from the stream. Count specifies the number of bytes that should be read from the stream. Returns the total number of bytes read into Buffer. This may be less than Count if that many bytes are not currently available, or may be 0 if the end of the stream has been reached.
Seek	Sets the current position within the stream based on a particular point of origin. function Seek(const Offset: Int64; Origin: TSeekOrigin): Int64; Offset specifies the offset in the stream to seek to, relative to Origin, which must be one of the values described by the TStream.Seek documentation. Returns the new position within the stream.
Write	Writes a sequence of bytes to the stream and advances the current position within the stream by the number of bytes written. function Write(const Buffer; Count: Longint): Longint; Buffer specifies the buffer with data to write to the stream. Count specifies the number of bytes that should be written to the stream. Returns the total number of bytes written to the stream.

Config Settings (CBFilter Component)

The component accepts one or more of the following configuration settings. Configuration settings are similar in functionality to properties, but they are rarely used. In order to avoid "polluting" the property namespace of the component, access to these internal properties is provided through the Config method.

CBFilter Config Settings

Base Config Settings

Trappable Errors (CBFilter Component)

The component uses Windows error codes during operations as necessary. Please refer to the Error Reporting and Handling topic for more information.

Special Use Errors

	21   ERROR_NOT_READY: Reported by the methods of the component if Initialize has not been called or did not succeed.
	575   ERROR_APP_INIT_FAILURE: Reported by the methods of the component if Initialize has not been called or did not succeed. Differs from ERROR_NOT_READY (21) in that it indicates a specific situation in the internal code.
	588   ERROR_FS_DRIVER_REQUIRED: Reported if the required system module was not correctly installed for the given ProductGUID.
	614   ERROR_NO_CALLBACK_ACTIVE: Reported by any method that can only be called within event handlers if it is called outside an event handler.
	1292   ERROR_IMPLEMENTATION_LIMIT: Reported when the timeout value provided is less than 3 seconds.
	1314   ERROR_PRIVILEGE_NOT_HELD: Reported by any method that requires elevated permissions if it is called without such permissions.